Description
Key Specifications
| Parameter | Value | Parameter | Value |
|---|---|---|---|
| Part Number | EP-GEG25ES 2RS | Series / reference | Heavy-Duty Sealed |
| Bore d (mm) | 25 | Outside diameter D (mm) | 47 |
| Width B (mm) | 28 | Inner-ring width C (mm) | 18 |
| Dk (mm) | 40.7 | R1s / R2s min | 0.6 / 0.6 mm |
| Articulation α | 17° | Dynamic load Cr | 62.0 kN |
| Static load C0r | 310 kN | Weight | 190 g |
| Lubrication | Relubrication required | Sealing | 2RS lip seals on both sides |
| Sliding pair | Steel / steel | Surface / liner | Outer and inner rings phosphate treated |
Product Description
EP-GEG25ES 2RS construction and application notes
EP-GEG25ES 2RS is the 25 mm-bore model in the GEG..ES 2RS Heavy-Duty Sealed family. Its nominal envelope is d 25 mm × D 47 mm with B 28 mm overall width.
Single-split heavy-duty GEG geometry, lubricating grooves and holes in both rings, plus 2RS lip seals on both faces. The 2RS seals help protect the bearing faces, but seal condition, grease access and the contamination path still need to be considered in the surrounding joint. On EP-GEG25ES-2RS, that construction is paired with a 25 mm bore, 47 mm outside diameter, 28 mm overall width, 62.0 kN dynamic rating and 17° catalogue articulation value.
For EP-GEG25ES-2RS, the sealed GEG family combines the wider heavy-duty radial geometry with lip seals on both faces. It is intended for exposed oscillating joints that justify the larger section while still retaining a planned grease route.
Installation and fit
For EP-GEG25ES-2RS, start the fit review from its 25 mm bore and 47 mm outside diameter, then check how the 28 mm bearing width is supported by the housing shoulders. The fitting-tolerance resource includes H7 and h6 among the reference classes; final fit still depends on ring loading, housing stiffness, temperature and the machine interface.
Selection Context
How to verify EP-GEG25ES-2RS in the joint
For EP-GEG25ES-2RS, the useful starting point for this row is the physical interface: pin diameter, housing bore and available axial space. The dimensional check should cover bore, outside diameter and both width values so the bearing is supported as intended. Include the oscillation pattern and maintenance interval; these details help distinguish a serviceable metallic pair from a lined alternative. For a new design, provide the joint drawing, load direction and expected movement so the model can be reviewed in context.
Références croisées
Brand reference for EP-GEG25ES 2RS
Cross-reference designations help identify the family. They do not replace dimensional, suffix, sealing and application checks.
| Brand | Reference designation | Verification note |
|---|---|---|
| SKF | GEH25ES 2RS | Reference designation; verify dimensions and suffix. |
| FAG | GEH25ES 2RS | Reference designation; verify dimensions and suffix. |
| ELGES | GE25FO 2RS | Reference designation; verify dimensions and suffix. |
| IKO | GE25GS 2RS | Reference designation; verify dimensions and suffix. |
Technical Documents
Drawings and order documents
Related Products
Compare the same bore across other constructions
Demande de devis
Request a quote for EP-GEG25ES 2RS
For EP-GEG25ES-2RS, include quantity, application, operating environment and any drawing or document requirement. The enquiry area keeps this 25 × 47 × 28 mm model in context so the quotation can be tied to the exact product rather than only the family name.
Model: EP-GEG25ES 2RS
