Description
Key Specifications
| Parameter | Value | Parameter | Value |
|---|---|---|---|
| Part Number | EP-GEG20ES 2RS | Series / reference | Heavy-Duty Sealed |
| Bore d (mm) | 20 | Outside diameter D (mm) | 42 |
| Width B (mm) | 25 | Inner-ring width C (mm) | 16 |
| Dk (mm) | 35.5 | R1s / R2s min | 0.6 / 0.6 mm |
| Articulation α | 17° | Dynamic load Cr | 48.0 kN |
| Static load C0r | 240 kN | Weight | 150 g |
| Lubrication | Relubrication required | Sealing | 2RS lip seals on both sides |
| Sliding pair | Steel / steel | Surface / liner | Outer and inner rings phosphate treated |
Product Description
EP-GEG20ES 2RS construction and application notes
EP-GEG20ES 2RS is the 20 mm-bore model in the GEG..ES 2RS Heavy-Duty Sealed family. Its nominal envelope is d 20 mm × D 42 mm with B 25 mm overall width.
Single-split heavy-duty GEG geometry, lubricating grooves and holes in both rings, plus 2RS lip seals on both faces. The 2RS seals help protect the bearing faces, but seal condition, grease access and the contamination path still need to be considered in the surrounding joint. On EP-GEG20ES-2RS, that construction is paired with a 20 mm bore, 42 mm outside diameter, 25 mm overall width, 48.0 kN dynamic rating and 17° catalogue articulation value.
For EP-GEG20ES-2RS, the sealed GEG family combines the wider heavy-duty radial geometry with lip seals on both faces. It is intended for exposed oscillating joints that justify the larger section while still retaining a planned grease route.
Installation and fit
For EP-GEG20ES-2RS, start the fit review from its 20 mm bore and 42 mm outside diameter, then check how the 25 mm bearing width is supported by the housing shoulders. The fitting-tolerance resource includes H7 and h6 among the reference classes; final fit still depends on ring loading, housing stiffness, temperature and the machine interface.
Selection Context
How to verify EP-GEG20ES-2RS in the joint
For EP-GEG20ES-2RS, when this model is shortlisted, use the machine drawing to confirm the surrounding shoulders before looking at alternatives. Use the bore to identify the pin size, then confirm the outer ring has adequate seating across the available housing width. Describe dust, water, wash-down or other exposure because the same dimensions can exist in constructions with different sealing strategies. If the old code is incomplete, include clear photographs of both bearing faces and any readable suffixes.
Références croisées
Brand reference for EP-GEG20ES 2RS
Cross-reference designations help identify the family. They do not replace dimensional, suffix, sealing and application checks.
| Brand | Reference designation | Verification note |
|---|---|---|
| SKF | GEH20ES 2RS | Reference designation; verify dimensions and suffix. |
| FAG | GEH20ES 2RS | Reference designation; verify dimensions and suffix. |
| ELGES | GE20FO 2RS | Reference designation; verify dimensions and suffix. |
| IKO | GE20GS 2RS | Reference designation; verify dimensions and suffix. |
Technical Documents
Drawings and order documents
Related Products
Compare the same bore across other constructions
Demande de devis
Request a quote for EP-GEG20ES 2RS
For EP-GEG20ES-2RS, include quantity, application, operating environment and any drawing or document requirement. The enquiry area keeps this 20 × 42 × 25 mm model in context so the quotation can be tied to the exact product rather than only the family name.
Model: EP-GEG20ES 2RS
