Tag Archives: bearing groove

China Standard Bearing Auto Bearing Wheel Hub Beraing Pillow Block Bearing Thrust Roller Bearing Self-Aligning Ball Bearing 6312 2RS Deep Groove Ball Bearing double row ball bearing

Product Description

Bearing Auto bearing Wheel hub beraing Pillow block bearing Thrust roller bearing Self-aligning ball bearing 6312 2RS Deep Groove Ball Bearing 

Bearing parameters:
 

CHROME STEEL*     Dimensions in mm unless otherwise specified
 
Bore O.D. Width Open Bearing Shielded Bearing Sealed Bearing Basic Load Ratings
      KN
HNS HNS HNS dynamic static
Reference Reference Reference C Co
20 42 12 6004 6004ZZ 6004-2RS 7.22 4.46
47 14 6204 6204ZZ 6204-2RS 12.7 6.5
52 15 6304 6304ZZ 6304-2RS 15.9 7.8
25 47 12 6005 6005ZZ 6005-2RS 10.1 5.85
52 15 6205 6205ZZ 6205-2RS 14 7.8
62 17 6305 6305ZZ 6305-2RS 22.5 11.6
80 21 6405 6405ZZ 6405-2RS 36.1 19.4
30 55 13 6006 6006ZZ 6006-2RS 10.2 6.91
62 16 6206 6206ZZ 6206-2RS 19.5 11.2
72 19 6306 6306ZZ 6306-2RS 28.1 16
90 23 6406 6406ZZ 6406-2RS 43.4 23.9
35 62 14 6007 6007ZZ 6007-2RS 16 10.3
72 17 6207 6207ZZ 6207-2RS 25.5 15.3
80 21 6307 6307ZZ 6307-2RS 33.2 19
100 25 6407 6407ZZ 6407-2RS 55 31
40 68 15 6008 6008ZZ 6008-2RS 13 11.5
80 18 6208 6208ZZ 6208-2RS 29.8 18
90 23 6308 6308ZZ 6308-2RS 39.8 23.3
110 27 6408 6408ZZ 6408-2RS 65.5 37.5
45 75 16 6009 6009ZZ 6009-2RS 21 14.9
85 19 6209 6209ZZ 6209-2RS 32.2 21
100 25 6309 6309ZZ 6309-2RS 51.1 30.5
120 29 6409 6409ZZ 6409-2RS 77.5 45.5
50 80 16 6571 6571ZZ 6571-2RS 22 16.2
90 20 6210 6210ZZ 6210-2RS 34 22.5
110 27 6310 6310ZZ 6310-2RS 59.9 36.9
130 31 6410 6410ZZ 6410-2RS 92.2 55.2
55 90 18 6011 6011ZZ 6011-2RS 30.4 22
100 21 6211 6211ZZ 6211-2RS 43.3 28.1
120 29 6311 6311ZZ 6311-2RS 71.5 44.6
140 33 6411 6411ZZ 6411-2RS 100 62.5
60 95 18 6012 6012ZZ 6012-2RS 30.7 22.7
110 22 6212 6212ZZ 6212-2RS 46.1 31.5
130 31 6312 6312ZZ 6312-2RS 79.4 50.4
150 35 6412 6412ZZ 6412-2RS 109 70
65 100 18 6013 6013ZZ 6013-2RS 32.1 24.9
120 23 6213 6213ZZ 6213-2RS 54.2 39.3
140 33 6313 6313ZZ 6313-2RS 89.5 59.7
160 37 6413 6413ZZ 6413-2RS 118 78.5
70 110 20 6014 6014ZZ 6014-2RS 38.6 30.6
125 24 6214 6214ZZ 6214-2RS 58.9 43.6
150 35 6314 6314ZZ 6314-2RS 101 66
180 42 6414 6414ZZ 6414-2RS 140 99.5
75 115 20 6015 6015ZZ 6015-2RS 31 33.1
130 25 6215 6215ZZ 6215-2RS 64.3 47.5
160 37 6315 6315ZZ 6315-2RS 111 74.2
190 45 6415 6415ZZ 6415-2RS 154 115
80 125 22 6016 6016ZZ 6016-2RS 47.5 39.8
140 26 6216 6216ZZ 6216-2RS 68.1 53.3
170 39 6316 6316ZZ 6316-2RS 120 83.9
200 48 6416 6416ZZ 6416-2RS 163 125
85 130 22 6017 6017ZZ 6017-2RS 50.8 42.8
150 28 6217 6217ZZ 6217-2RS 83.2 64
180 41 6317 6317ZZ 6317-2RS 132 96.5
210 52 6417 6417ZZ 6417-2RS 175 138
90 140 24 6018 6018ZZ 6018-2RS 58 49.8
160 30 6218 6218ZZ 6218-2RS 92.7 71.3
190 43 6318 6318ZZ 6318-2RS 145 108
225 54 6418 6418ZZ 6418-2RS 192 158
95 145 24 6019 6019ZZ 6019-2RS 57.8 50
170 32 6219 6219ZZ 6219-2RS 105 79.1
200 45 6319 6319ZZ 6319-2RS 157 122
100 150 24 6571 6571ZZ 6571-2RS 64.5 56.2
180 34 6220 6220ZZ 6220-2RS 118 88.4
215 47 6320 6320ZZ 6320-2RS 173 140
105 160 26 6571 6571ZZ 6571-2RS 71.8 63.2
190 36 6221 6221ZZ 6221-2RS 126 98.8
225 49 6321 6321ZZ 6321-2RS 173 145
110 170 28 6571 6571ZZ 6571-2RS 81.9 72.9
200 38 6222 6222ZZ 6222-2RS 136 112
240 50 6322 6322ZZ 6322-2RS 193 171
120 180 28 6571 6571ZZ 6571-2RS 88.7 79.7
215 40 6224 6224ZZ 6224-2RS 139 112
260 55 6324 6324ZZ 6324-2RS 217 196
130 200 33 6026 6026ZZ 6026-2RS 105 96.8
230 40 6226 6226ZZ 6226-2RS 148 125
280 58 6326 6326ZZ 6326-2RS 218 205
140 210 33 6571 6571ZZ 6571-2RS 116 108
250 42 6228 6228ZZ 6228-2RS 179 167
300 62 6328 6328ZZ 6328-2RS 275 272
150 225 35 6030 6030ZZ 6030-2RS 132 125
270 45 6230 6230ZZ 6230-2RS 190 183
160 240 38 6032 6032ZZ 6032-2RS 145 138
290 48 6232 6232ZZ 6232-2RS 215 218

About Deep Groove Ball Cearing

  • 6000 Series – Extra Light Ball Bearings – Ideal for limited space applications
  • 6200 Series – Light Series Ball Bearings – Balanced between space and load capacity
  • 6300 Series – Medium Series Ball Bearings – Ideal for heavier load capacity applications

Deep groove ball bearing component:

Rich bearings in stock:


Application

Package:
A. Plastic paper + kraft paper + outer carton + Nylon bag
B. Tube package + outer carton + Nylon bag
C. Single box + outer carton + pallets
D. According to your requirement

For more information, contact us directly pls.
  /* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

Seals Type: Open, Z/Zz, RS/2RS
Cage: Steel
Application: Automotive
Stock: Rich
Sample: Available
Load Port: Qingdao
Samples:
US$ 0.01/Piece
1 Piece(Min.Order)

|
Request Sample

Customization:
Available

|

Customized Request

self aligning bearing

How do innovations and advancements in self-aligning bearing technology impact their use?

Advancements and innovations in self-aligning bearing technology have a significant impact on their use in various industries. Here’s a detailed explanation:

  • Improved Performance:

Innovations in self-aligning bearing technology often result in improved performance characteristics. These advancements can include:

  • Load Capacity: New bearing designs and materials can enhance the load-carrying capacity of self-aligning bearings, allowing them to withstand higher loads or operate under more demanding conditions.
  • Speed Capability: Advancements in bearing manufacturing techniques and materials can increase the maximum rotational speed at which self-aligning bearings can operate effectively, enabling their use in high-speed applications.
  • Friction Reduction: Innovations in bearing design, lubrication, and surface treatments contribute to reducing friction and energy losses, resulting in improved efficiency and reduced operating costs.
  • Sealing and Contamination Resistance: New sealing technologies and materials can enhance the sealing performance of self-aligning bearings, providing better protection against contaminants, moisture, and harsh environmental conditions.
  • Temperature and Corrosion Resistance: Advances in bearing materials and coatings enable self-aligning bearings to withstand extreme temperatures, aggressive chemicals, and corrosive environments, expanding their range of applications.
  • Extended Service Life:

Innovations in self-aligning bearing technology often result in improved durability and longevity. These advancements can include:

  • Materials: The development of new bearing materials, such as advanced steels, ceramics, or composites, can significantly enhance the bearing’s resistance to wear, fatigue, and surface damage, leading to extended service life.
  • Lubrication: Advancements in lubrication technologies, such as the use of solid lubricants or advanced grease formulations, can provide better film formation, reduce friction, and minimize wear, thereby increasing the bearing’s operating life.
  • Surface Treatments: Innovative surface treatments, such as coatings or finishes, can improve the bearing’s resistance to corrosion, wear, and fretting, contributing to longer service intervals and reduced maintenance requirements.
  • Condition Monitoring: The integration of sensor technologies and data analytics in self-aligning bearings enables real-time monitoring of operating conditions, allowing for proactive maintenance and early detection of potential failures, thus maximizing the bearing’s service life.
  • Application Expansion:

Advancements in self-aligning bearing technology often lead to an expansion of their application range. These advancements can include:

  • New Industries: Innovations in self-aligning bearing technology can enable their use in industries or applications where they were previously not feasible. This opens up opportunities in emerging sectors, such as renewable energy, electric vehicles, robotics, or medical devices.
  • Challenging Environments: Improved performance characteristics, such as enhanced sealing, temperature resistance, or contamination resistance, allow self-aligning bearings to be deployed in challenging environments, including offshore installations, high-temperature processes, or chemically aggressive applications.
  • Specialized Applications: Advancements in self-aligning bearing technology can lead to the development of specialized bearing variants tailored for specific applications, such as high-speed machining, precision equipment, or demanding industrial automation systems.

Overall, innovations and advancements in self-aligning bearing technology bring about enhanced performance, extended service life, and expanded application possibilities. These advancements drive improvements in industrial productivity, reliability, and efficiency, making self-aligning bearings a valuable component in a wide range of industries and applications.

self aligning bearing

How do self-aligning bearings perform in applications with varying loads and misalignment challenges?

Self-aligning bearings are specifically designed to perform exceptionally well in applications with varying loads and misalignment challenges. Here’s an in-depth explanation of their performance characteristics:

  • Misalignment Compensation:

Self-aligning bearings are capable of accommodating various types of misalignment, including angular misalignment and shaft deflection. They feature a design that incorporates two rows of rolling elements, such as balls or rollers, and a spherical outer ring raceway. This design allows the bearing to self-align, adapting to misalignment caused by factors such as shaft deflection, mounting errors, thermal expansion, and vibrations. Self-aligning bearings can handle misalignment within certain limits, maintaining proper alignment between the mating components and minimizing additional stresses on the bearing.

  • Load-Carrying Capacity:

Self-aligning bearings are engineered to handle high loads, both radial and axial. They have a robust construction with larger rolling elements and increased contact area, enabling them to distribute the load more effectively. This enhanced load-carrying capacity makes self-aligning bearings suitable for applications where varying loads are encountered. Whether it’s fluctuating radial loads, axial loads, or a combination of both, self-aligning bearings can handle the dynamic forces and provide reliable performance.

  • Flexibility and Versatility:

Self-aligning bearings offer flexibility and versatility in applications with varying loads and misalignment challenges. They can operate in conditions where shafts are not perfectly aligned or where there are slight shaft movements. This flexibility allows for easier installation and alignment adjustments, reducing the time and effort required for precise positioning of the bearing. Additionally, self-aligning bearings are available in different designs and configurations, including ball bearings and roller bearings, providing options to match specific application requirements.

  • Reduced Friction and Heat Generation:

Self-aligning bearings are designed to minimize friction and heat generation during operation. The rolling elements and raceways are precisely engineered to reduce contact stresses and optimize the distribution of forces. This results in lower friction levels and reduced heat buildup, enhancing the overall efficiency and reliability of the bearing in applications where varying loads and misalignment challenges are present.

  • Extended Service Life:

Due to their ability to accommodate misalignment and handle varying loads, self-aligning bearings contribute to an extended service life of the machinery. By reducing the stresses and excessive forces on the bearing and its surrounding components, self-aligning bearings help minimize wear, prevent premature failure, and increase the overall durability of the equipment.

In summary, self-aligning bearings excel in applications with varying loads and misalignment challenges. Their ability to compensate for misalignment, handle high loads, provide flexibility in installation, and reduce friction and heat generation makes them well-suited for industries such as mining, construction, paper manufacturing, steel production, and many others where these challenges are prevalent.

self aligning bearing

How do self-aligning bearings differ from fixed or non-self-aligning bearings?

Self-aligning bearings differ from fixed or non-self-aligning bearings in several ways. Here’s a detailed explanation of the differences between these types of bearings:

  • Design and Construction:

The design and construction of self-aligning bearings are distinct from fixed or non-self-aligning bearings. Self-aligning bearings have a spherical outer ring raceway, which allows for misalignment compensation. In contrast, fixed or non-self-aligning bearings typically have a cylindrical or tapered outer ring raceway, designed for precise alignment between the shaft and the housing.

  • Misalignment Compensation:

The primary difference between self-aligning bearings and fixed or non-self-aligning bearings is their ability to compensate for misalignment. Self-aligning bearings can accommodate angular misalignment, axial misalignment, and shaft deflection, whereas fixed or non-self-aligning bearings have limited tolerance for misalignment and require precise alignment during installation.

  • Load Distribution:

Self-aligning bearings distribute the load more evenly across the rolling elements and raceways, thanks to their ability to accommodate misalignment. This helps reduce localized stresses and minimize the risk of premature failure. Fixed or non-self-aligning bearings, without the ability to compensate for misalignment, may experience uneven loading and increased stress on specific areas, leading to accelerated wear and potential failure.

  • Friction and Wear:

Due to their misalignment compensation capability, self-aligning bearings help reduce friction and wear. Misalignment in fixed or non-self-aligning bearings can cause increased friction and localized wear, leading to reduced bearing life. Self-aligning bearings distribute the load more evenly, minimizing friction and wear on the rolling elements and raceways, resulting in improved reliability and longevity.

  • Application Range:

The different design and misalignment compensation capability of self-aligning bearings make them suitable for a broader range of applications compared to fixed or non-self-aligning bearings. Self-aligning bearings are commonly used in applications where misalignment is expected, such as heavy machinery, conveyor systems, and mining equipment. Fixed or non-self-aligning bearings are typically employed in applications that require precise alignment, such as machine tools or high-precision equipment.

  • Installation and Maintenance:

Self-aligning bearings offer easier installation and maintenance compared to fixed or non-self-aligning bearings. The self-aligning capability of these bearings allows for more flexibility during the installation process, accommodating slight misalignments. In contrast, fixed or non-self-aligning bearings require careful alignment procedures to ensure proper functioning. Additionally, self-aligning bearings are often designed for easier maintenance, enabling tasks such as re-greasing or replacement without extensive disassembly.

In summary, self-aligning bearings differ from fixed or non-self-aligning bearings in their design, misalignment compensation capability, load distribution, friction and wear characteristics, application range, and ease of installation and maintenance. These differences make self-aligning bearings particularly suitable for applications where misalignment is expected or dynamic operating conditions are present.

China Standard Bearing Auto Bearing Wheel Hub Beraing Pillow Block Bearing Thrust Roller Bearing Self-Aligning Ball Bearing 6312 2RS Deep Groove Ball Bearing   double row ball bearingChina Standard Bearing Auto Bearing Wheel Hub Beraing Pillow Block Bearing Thrust Roller Bearing Self-Aligning Ball Bearing 6312 2RS Deep Groove Ball Bearing   double row ball bearing
editor by CX 2024-05-16

China Custom High Temperature Resistant 23020cak/W33 23020 23020/W33 23022c Self-Aligning Roller Bearing China Original Bearing Brand deep groove ball bearing

Product Description

 

Product Description

 

Product Name

Spherical Roller Bearing

Material

Chrome Steel, GCR15

Type

Double Row

Size

d:3-150mm,D:9-225mm

Grade

PO,P6,P5,P4,P2 

Cage

Steel Cage,Cooper Cage

Used For

Paper machine, deceleration device, railway vehicle axle, rolling mill gearbox seat, rolling mill roller track, crusher, vibrating
screen, printing machine, woodworking machinery

Warranty

1 year

Brand

OEM or ZKZF

Packing

According to the buyer requests for packaging

Bearing No.

Dimensions(mm)

Weight

 

d

D

T

kg

22208CA/C3W33

40

80

23

0.54

22209CA/C3W33

45

85

23

0.58

22210CA/C3W33

50

90

23

0.62

22211CA/C3W33

55

100

25

0.84

22212CA/C3W33

60

110

28

1.2

22213CA/C3W33

65

120

31

1.6

22214CA/C3W33

70

125

31

1.7

22215CA/C3W33

75

130

31

1.8

22216CA/C3W33

80

140

33

2.2

22217CA/C3W33

85

150

36

2.7

22218CA/C3W33

90

160

40

3.28

22219CA/C3W33

95

170

43

4.1

22220CA/C3W33

100

180

46

5

22222CA/C3W33

110

200

53

7.2

22224CA/C3W33

120

215

58

8.9

22226CA/C3W33

130

230

64

11.2

22228CA/C3W33

140

250

68

14.5

22230CA/C3W33

150

270

73

18.6

22308CA/C3W33

40

90

33

1

22309CA/C3W33

45

100

36

1.38

22310CA/C3W33

50

110

40

1.85

22311CA/C3W33

55

120

43

2.35

22312CA/C3W33

60

130

46

2.95

22313CA/C3W33

65

140

48

3.55

22314CA/C3W33

70

150

51

4.4

22315CA/C3W33

75

160

55

5.25

22316CA/C3W33

80

170

58

6.39

22317CA/C3W33

85

180

60

7.25

22318CA/C3W33

90

190

64

8.6

22319CA/C3W33

95

200

67

10.1

22320CA/C3W33

100

215

73

13.4

22322CA/C3W33

110

240

80

18

22324CA/C3W33

120

260

86

22

22326CA/C3W33

130

280

93

28.5

Bearing No.

Dimensions(mm)

Weight

 

d

D

T

KG

21306CA/C3W33

30

72

19

0.412

21307CA/C3W33

35

80

21

0.542

21308CA/C3W33

40

90

23

0.743

21309CA/C3W33

45

100

25

1

21310CA/C3W33

50

110

27

1.3

21311CA/C3W33

55

120

29

1.65

21312CA/C3W33

60

130

31

2.08

21313CA/C3W33

65

140

33

2.57

21314CA/C3W33

70

150

35

3.11

21315CA/C3W33

75

160

37

3.76

21316CA/C3W33

80

170

39

4.47

21322CA/C3W33

110

240

50

11.8

23571CA/C3W33

120

180

46

3.98

23026CA/C3W33

130

200

52

5.85

23571CA/C3W33

140

210

53

6.31

23030CA/C3W33

150

225

56

7.74

23032CA/C3W33

160

240

60

9.43

23034CA/C3W33

170

260

67

12.8

23036CA/C3W33

180

280

74

16.9

23038CA/C3W33

190

290

75

17.7

23040CA/C3W33

200

310

82

22.7

23044CA/C3W33

220

340

90

29.7

23048CA/C3W33

240

360

92

32.4

24571CA/C3W33

120

180

60

5.05

24026CA/C3W33

130

200

69

7.55

24571CA/C3W33

140

210

69

8.01

24030CA/C3W33

150

225

75

10.1

24032CA/C3W33

160

240

80

12.2

24034CA/C3W33

170

260

90

16.7

24036CA/C3W33

180

280

100

22.1

24038CA/C3W33

190

290

100

23

24040CA/C3W33

200

310

109

29.3

24044CA/C3W33

220

340

118

38.1

24048CA/C3W33

240

360

118

40.8

MAIN PRODUCTS

Tapered roller bearings, cylindrical roller bearings, ball bearings, self-aligning roller bearings, base bearings, car hub bearings,

truck hub bearings and other products, We can customize the bearing according to the drawings or samples provided by the customer

FIELDS OF APPLICATION

Grain machinery, textile machinery, washing machinery, engineering machinery, industrial deceleration machinery, woodworking

machinery,papermaking machinery, mining machinery, coal mining machinery, lifting machinery, construction machinery,

large transportation equipment,chemical machinery, petroleum machinery, metallurgical industry, large steel mills, cement plants,

energy industry, automobiles, trucks, etc.

Packaging & Shipping

Plastic bag + single box + carton + tray; Industrial packaging + carton + pallet;
We also can According to your requirements to change.

Company Profile

HangZhou CZPT Trading Co., Ltd. is a bearing manufacturer, integrating research, development and sale of bearings , Equipped with modern production equipment and advanced detection instruments

our company specially produces Bearings including Deep groove ball bearings, self-aligning roller bearing, tapered roller bearing, thrust ball bearings, and hub bearings.we bearings are widely used in complete products in metallurgical, mining, petroleum, chemical, coal, cement, Paper making, wind power, heavy machinery, engineering machinery and port machinery industries.

With precision of grade P0, grade P6 P5 P4, we bearings are widely used in complete products in metallurgical,mining, petroleum, chemical, coal, cement, papermaking, wind power, heavy machinery, engineering machinery and port machinery industries. With self-run import & export rights, it sells its products not only across China,but also in tens of other countries and areas such as the United States, Canada, Italy, Russia, German and South Africa, etc.

We would like to serve the customers around the world with our trustworthy products, reasonable price and attentive service. The leading products of the company cover 3 main categories which include more than 3,000 types of bearing products.

FAQ

1.What is your Before-sales Service?
Offer to bear related consultation about technology and application;
Help customers with bearing choice, clearance configuration, products’ life and reliability analysis;
Offer highly cost-effective and complete solution program according to site conditions;
Offer localized program on introduced equipment to save running cost

2.What is your latest delivery time?
If the goods are in stock, usually 5-10 days. Or if the goods are not in stock, it is 15-20 days, which is based
on the quantity.

3.Does your company have quality assurance?
Yes, for 2 years.

4.What is the competitiveness of your company’s products compared to other companies?
High precision, high speed, low noise.

5.What are the advantages of your company’s services compared to other companies?
Answer questions online 24 hours a day, reply in a timely manner, and provide various documents required
by customers for customs clearance or sales. 100% after-sales service.

6.Which payment method does your company support?
30% deposit,balance payment before delivery.

7.How to contact us quickly?
Please send us an inquiry or message and leave your other contact information, such as phone number,
account or account, we will contact you as soon as possible.

/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

OEM: Available
Rolling Body: Roller Bearings
The Number of Rows: Double
Outer Dimension: Small and Medium-Sized (60-115mm)
Material: Bearing Steel
Spherical: Aligning Bearings
Samples:
US$ 10/Piece
1 Piece(Min.Order)

|
Request Sample

Customization:
Available

|

Customized Request

self aligning bearing

Can you provide guidance on the selection and sizing of self-aligning bearings for specific applications?

Yes, here’s a detailed explanation on the selection and sizing of self-aligning bearings for specific applications:

  • Understand the Application Requirements:

The first step in selecting and sizing self-aligning bearings is to thoroughly understand the requirements of the application. Consider factors such as:

  • Load: Determine the magnitude and direction of the load the bearing will be subjected to, including static, dynamic, and shock loads.
  • Speed: Identify the rotational speed or frequency of operation to ensure the selected bearing can handle the required speed without compromising performance.
  • Environment: Consider the operating environment, including temperature range, presence of contaminants, moisture, or corrosive substances, and any other specific environmental factors that may affect the bearing’s performance.
  • Mounting and Space Constraints: Evaluate the available space for bearing installation and any specific mounting requirements or constraints within the application.
  • Service Life and Maintenance: Determine the desired service life and maintenance intervals to select a bearing that can meet these requirements.
  • Consult Bearing Manufacturer’s Catalogs and Technical Resources:

Once the application requirements are understood, consult the catalogs and technical resources provided by self-aligning bearing manufacturers. These resources contain valuable information such as bearing types, sizes, load ratings, and operating characteristics.

Identify the specific self-aligning bearing series or types that are suitable for the application based on the load capacity, speed capability, and other performance factors.

  • Consider Bearing Materials and Lubrication:

Pay attention to the bearing materials and lubrication requirements. Different bearing materials, such as steel, ceramic, or polymers, offer varying levels of performance in terms of load capacity, temperature resistance, and corrosion resistance.

Choose the appropriate bearing material that aligns with the application’s requirements. Additionally, consider the lubrication method and type of lubricant recommended for optimal bearing performance and longevity.

  • Factor in Safety and Reliability:

Ensure that the selected self-aligning bearing has an appropriate safety margin to handle the expected loads and operating conditions. It is advisable to consult with bearing experts or utilize engineering calculations to verify the bearing’s suitability and reliability.

  • Consider Application-Specific Features:

Depending on the application, there may be specific features or options to consider. For example, applications with high contamination levels may require sealed or shielded bearings to prevent debris ingress, while applications with high-speed requirements may benefit from bearings with optimized internal designs or cage materials.

  • Review Manufacturer Recommendations:

Finally, review the manufacturer’s recommendations for the selected self-aligning bearing in terms of installation guidelines, maintenance procedures, and any specific considerations for the application.

By following these guidelines and consulting with bearing manufacturers or experts when needed, you can make an informed selection and sizing of self-aligning bearings that meet the specific requirements of your application, ensuring reliable performance and longevity.

self aligning bearing

Can you provide examples of machinery or equipment that rely on self-aligning bearings for reliable operation?

Self-aligning bearings play a crucial role in ensuring the reliable operation of various types of machinery and equipment. Here are some examples of machinery and equipment that rely on self-aligning bearings:

  • Mining Equipment: Self-aligning bearings are used in mining equipment such as crushers, vibrating screens, and conveyor systems. These bearings help compensate for misalignment caused by heavy loads, vibrations, and uneven terrain, ensuring smooth operation and minimizing downtime in the mining industry.
  • Construction Machinery: Construction machinery, including excavators, loaders, and concrete mixers, rely on self-aligning bearings. These bearings accommodate misalignment caused by heavy loads, shock loads, and dynamic forces, enabling reliable performance and durability in demanding construction sites.
  • Paper Machines: Self-aligning bearings are essential components in paper machines, including the dryer section, press section, and calender rolls. These bearings compensate for misalignment caused by thermal expansion, high speeds, and varying loads, ensuring precise alignment and smooth operation throughout the paper manufacturing process.
  • Steel Rolling Mills: Self-aligning bearings are critical in steel rolling mills, where they support the heavy loads and high temperatures involved in the rolling process. These bearings accommodate misalignment caused by thermal expansion, roll deflection, and varying loads, ensuring the accuracy and efficiency of the rolling operations.
  • Printing Presses: Printing presses rely on self-aligning bearings in their rollers, cylinders, and other moving parts. These bearings compensate for misalignment caused by high-speed rotations, vibrations, and thermal effects, ensuring precise alignment and reliable operation in the printing industry.
  • Wind Turbines: Self-aligning bearings are crucial components in wind turbines, supporting the main shaft and rotor assembly. These bearings accommodate misalignment caused by wind gusts, turbine movements, and varying loads, enabling efficient power generation and prolonged service life of the wind turbine.
  • Automotive Wheel Hubs: Self-aligning bearings are used in automotive wheel hub assemblies, providing reliable rotation and supporting the vehicle’s weight. These bearings compensate for misalignment caused by uneven road surfaces, cornering forces, and thermal effects, ensuring safe and smooth operation of automotive vehicles.
  • Food Processing Equipment: Self-aligning bearings are employed in food processing equipment such as mixers, blenders, and conveyors. These bearings accommodate misalignment caused by varying loads, thermal effects, and sanitation processes, ensuring hygienic operation and reliability in food manufacturing facilities.

These are just a few examples of the machinery and equipment that rely on self-aligning bearings for reliable operation. Self-aligning bearings are utilized in a wide range of industries, including mining, construction, paper manufacturing, steel production, printing, renewable energy, automotive, and food processing, among others. Their ability to compensate for misalignment, handle high loads, and ensure smooth operation makes them indispensable components in numerous applications.

self aligning bearing

Can you describe the load-carrying capacity and load ratings of self-aligning bearings?

Self-aligning bearings are designed to carry both radial and axial loads, and their load-carrying capacity is an essential consideration for their proper selection and application. Here’s a detailed description of the load-carrying capacity and load ratings of self-aligning bearings:

  • Radial Load Capacity:

The radial load capacity of a self-aligning bearing refers to its ability to carry loads that act perpendicular to the axis of rotation. It is influenced by factors such as bearing geometry, material properties, and internal design. Self-aligning bearings, particularly spherical roller bearings, are known for their high radial load-carrying capacity. This is due to their construction that includes multiple rows of robust rolling elements and optimized raceway profiles. The larger contact area between the rolling elements and raceways allows for efficient load distribution, enabling the bearing to handle substantial radial loads.

  • Axial Load Capacity:

The axial load capacity of a self-aligning bearing refers to its ability to carry loads that act parallel to the axis of rotation. The axial load-carrying capacity depends on the bearing type and design, as well as the arrangement of rolling elements. Self-aligning thrust roller bearings, for example, are specifically designed to handle significant axial loads. They utilize cylindrical or tapered rolling elements arranged in a specific orientation to withstand axial forces. Self-aligning ball bearings can also carry moderate axial loads in addition to their primary radial load-carrying capacity.

  • Dynamic Load Rating:

The dynamic load rating of a self-aligning bearing is a standardized value that indicates the maximum load that the bearing can sustain for a specified number of rotations or operating hours without experiencing premature fatigue failure. It is expressed in terms of the calculated dynamic equivalent radial or axial load, which takes into account the actual load distribution within the bearing. The dynamic load rating is typically provided by the manufacturer and allows engineers to compare and select bearings based on their expected performance under dynamic operating conditions.

  • Static Load Rating:

The static load rating of a self-aligning bearing represents the maximum load that the bearing can sustain without permanent deformation or excessive stress when the bearing is stationary or subjected to very slow rotations. It is typically higher than the dynamic load rating. The static load rating is an important consideration for applications where the bearing may be subjected to prolonged static or slow-speed conditions, such as in machinery that operates with intermittent or intermittent rotational motion.

It is important to note that the load-carrying capacity and load ratings provided by manufacturers are based on standardized testing methods and assumptions about operating conditions. Actual load capacity can be influenced by factors such as temperature, lubrication, misalignment, and operating speed. Therefore, it is crucial to consider the specific application requirements and consult the manufacturer’s technical data and guidelines when selecting a self-aligning bearing to ensure its suitability and optimal performance.

China Custom High Temperature Resistant 23020cak/W33 23020 23020/W33 23022c Self-Aligning Roller Bearing China Original Bearing Brand   deep groove ball bearingChina Custom High Temperature Resistant 23020cak/W33 23020 23020/W33 23022c Self-Aligning Roller Bearing China Original Bearing Brand   deep groove ball bearing
editor by CX 2024-05-08

China OEM Deep Groove Ball Bearing Self-Aligning Ball Bearing Cylindrical Roller Bearing Angular Ball Bearing Auto Bearing Tapered Roller Bearing Thrust Ball Bearing with Good quality

Product Description

   

Company Profile

       MKS Hydraulics ZheJiang Co., Ltd.is a scientific and professional bearing producing enterprise, gathering R&D, producing and sales as 1  integration.mainly operating on non-standard, special andgeneral bearings.

       The company is especially focusing on the research and manufacture of general high-tech production with the 20 years R&D experience, professional R&D staff and advanced equipment, of which 8 sets are imported equipment and 40 sets are high-precision processing equipment. it has invested for building a modern workshop, including 1 Bainite heat processing workshop of world advanced level, 1 machine processing workshop, 2 moder thermostatic &no-dust roller grinders, assembly workshop, physical-chemical testing center, heating laboratory and moder-managed warehouse. Depending on the markets in China and abroad, the company puts an active attitude upon products R&D, resulting a healthy circulation of 1 development generation, 1 reserve generation, and 1 producion generation. The enterprise enlarges the R&D investment, creates own brand, and strives to increase the exporting products of high-tech & high value-added, gains the honorable sales result and grows into 1 of the largest R&D enterprise in China of non-standard bearing and special bearing.

       The advanced technology, outstanding quaity and considerable service after sales with enthusiasm make us get the rapid development in quite short time of years, and now it becomes the largest developing and producing enterprise in Asia of concrete carrier truck, speed-reducing machine,mine-digging machine, hydraulic pump spindle bearing and crecent bearing. With the continuing and wholly new developing theory of Technology is the motivation and quality is the life, We are not only pursuing the leading position in China, but also determined to march into the worldwide bearing area during it developing process, The products are mainly applied on the industries of mine, metalurgy, engineering, machineny, machine tool,electronic machine and so on, The products have gained the excllent sales resul in the markets of Europe, Southeast Asia, Middle East and so on in a dozen of countries and areas.

Company Environment

Company Advantages

Packaging & Shipping

FAQ

1. how can we guarantee quality?
Always final Inspection before shipment;

2.what can you buy from us?
Auto Bearing,Bearing Housing,Taper Roller Bearing,Casting,Hydraulic pump,Hydraulic parts,excavator parts and so on.

Ceep groove ball bearing/Self aligning ball bearing/Cylindrical roller bearing/Spherical roller bearing/ Angular contact ball bearing/Tapered roller bearing/ Thrust ball bearing/Thrust cylindrical roller bearing/Needle roller bearing

3. why should you buy from us not from other suppliers?
One stop bearing and mechanical customized parts,
Designed bearing,
Small quantity order available 
Factory price offer
OEM ODM bearing service

4.What is the transportation?
lf small quantity,we suggest to send by express,such as DHL,UPS,TNT FEDEX flarge amount,by air or sea shipping.

5.Can we design packaging?
Except regular packing,and we can make customer’s own packing.

6.What’s your payment method?
We can accept LC, T/T, D/P, PayPal, Western Union, Small-amount payment, MoneyGram etc.

7.Can the company provide free samples?
We can provide samples for free. You only need to provide shipping.

8.Is the company a production factory or a trading company?
MKS company is a manufacturing enterprise focusing on bearings ,hydraulic pumps and hydraulic parts , produce and sales.

If you have any questions,Please contact us,We must be reply quickly.

 

 

 

/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

Raceway Super Finishing: Yes
Bearing Grade: P3
Service: OEM / ODM Customized Logo
Samples:
US$ 100/Piece
1 Piece(Min.Order)

|

Order Sample

Customization:
Available

|

Customized Request

.shipping-cost-tm .tm-status-off{background: none;padding:0;color: #1470cc}

Shipping Cost:

Estimated freight per unit.







about shipping cost and estimated delivery time.
Payment Method:







 

Initial Payment



Full Payment
Currency: US$
Return&refunds: You can apply for a refund up to 30 days after receipt of the products.

self aligning bearing

What are the eco-friendly or sustainable aspects of self-aligning bearing materials?

Self-aligning bearings can incorporate eco-friendly or sustainable aspects in their material composition. Here’s a detailed explanation:

  • Recyclable Materials:

Many self-aligning bearings are made from materials that are recyclable. Steel, which is commonly used for bearing rings and rolling elements, is highly recyclable and can be processed and reused multiple times without significant loss of properties. By choosing self-aligning bearings made from recyclable materials, the environmental impact associated with the disposal and production of bearings can be reduced.

  • Low Environmental Footprint:

The production of self-aligning bearings involves various manufacturing processes. Manufacturers often strive to optimize these processes to minimize energy consumption, reduce waste generation, and lower greenhouse gas emissions. By improving energy efficiency and reducing environmental footprint during production, self-aligning bearing manufacturers contribute to sustainable practices.

  • Reduced Material Consumption:

The design and development of self-aligning bearings focus on optimizing their performance while minimizing material consumption. Through advanced engineering techniques, including material selection, design optimization, and improved manufacturing processes, manufacturers can reduce the amount of material required to produce self-aligning bearings. This not only helps to conserve natural resources but also reduces the overall weight of the bearing, leading to lower energy consumption during operation.

  • Alternative Materials:

In recent years, there have been advancements in the development of alternative bearing materials that offer improved sustainability characteristics. For example:

  • Ceramic Bearings: Ceramic materials, such as silicon nitride or zirconia, are increasingly used in self-aligning bearings due to their excellent wear resistance, corrosion resistance, and high-temperature capabilities. Ceramic bearings can contribute to sustainability by reducing the need for lubrication, extending maintenance intervals, and minimizing the use of lubricants that may have environmental impacts.
  • Polymer Bearings: Self-aligning bearings made from polymer materials, such as reinforced plastics or engineered polymers, offer advantages such as self-lubrication, resistance to corrosion and chemicals, and reduced weight. Polymer bearings can provide sustainability benefits by eliminating the need for external lubrication, reducing friction and energy consumption, and offering potential for longer service life.
  • Extended Service Life:

Self-aligning bearings with extended service life contribute to sustainability by reducing the frequency of bearing replacements and associated waste generation. Advancements in bearing materials, surface treatments, and lubrication technologies have led to improved durability and longer operating life, resulting in reduced environmental impact and lower maintenance requirements.

It’s important to note that while self-aligning bearing materials can have eco-friendly or sustainable aspects, the overall sustainability of an application or system also depends on other factors, such as energy efficiency, proper maintenance practices, and end-of-life disposal considerations. Therefore, a holistic approach considering the entire lifecycle of the equipment and its components is essential for achieving sustainable practices.

self aligning bearing

Are there specific industries or applications where self-aligning bearings are frequently used?

Self-aligning bearings find widespread use in various industries and applications where misalignment compensation, high load-carrying capacity, and reliability are crucial. Here’s a detailed description of some specific industries and applications where self-aligning bearings are frequently employed:

  • Heavy Machinery and Equipment:

Self-aligning bearings are extensively used in heavy machinery and equipment, such as mining equipment, construction machinery, and material handling systems. These applications often involve high loads, dynamic forces, and operating conditions that can lead to misalignment. Self-aligning bearings help accommodate misalignment caused by factors like vibration, thermal expansion, and shaft deflection, ensuring smooth operation and prolonged service life of the machinery.

  • Paper and Pulp Industry:

In the paper and pulp industry, self-aligning bearings are commonly employed in critical equipment like paper machines, pulp digesters, and drying cylinders. These applications involve high-speed rotating components and heavy loads. Self-aligning bearings can handle misalignment caused by temperature variations, mechanical stresses, and process fluctuations, maintaining the reliability and productivity of the machinery in this demanding industry.

  • Steel and Metal Processing:

Self-aligning bearings are vital in steel and metal processing applications, including rolling mills, continuous casting machines, and metal shredders. These applications involve extreme loads, high temperatures, and harsh operating conditions. Self-aligning bearings help compensate for misalignment caused by thermal expansion, deflection, and heavy loads, ensuring the durability and performance of the equipment in this industry.

  • Conveyor Systems:

Conveyor systems in industries such as mining, manufacturing, and logistics often rely on self-aligning bearings. These bearings accommodate misalignment caused by belt tension, shaft deflection, and uneven loading. Self-aligning bearings help ensure smooth and reliable operation of the conveyor systems, minimizing downtime and optimizing productivity.

  • Printing and Packaging:

In printing and packaging applications, self-aligning bearings are commonly used in printing presses, packaging machines, and label applicators. These applications involve high-speed rotations, varying loads, and precise alignment requirements. Self-aligning bearings help compensate for misalignment caused by machine vibrations and thermal effects, ensuring accurate and efficient operation of the printing and packaging equipment.

  • Automotive Industry:

The automotive industry extensively utilizes self-aligning bearings in various components and systems, including wheel hubs, transmission systems, and suspension systems. These applications encounter dynamic forces, varying loads, and misalignment due to road conditions and vehicle movements. Self-aligning bearings help absorb misalignment and maintain proper alignment between components, contributing to the safety, performance, and longevity of automotive vehicles.

These are just a few examples of industries and applications where self-aligning bearings are frequently used. Other sectors, such as agriculture, energy, marine, and aerospace, also rely on self-aligning bearings to ensure reliable and efficient operation of their equipment and machinery.

self aligning bearing

How do self-aligning bearings compensate for misalignment in machinery?

Self-aligning bearings are designed to compensate for misalignment in machinery, allowing them to accommodate angular misalignment, axial misalignment, and shaft deflection. Here’s a detailed explanation of how self-aligning bearings achieve misalignment compensation:

  • Spherical Outer Ring Raceway:

The key feature of self-aligning bearings is their spherical outer ring raceway. This raceway is designed to have a curvature that matches the spherical shape of the rolling elements, such as balls or rollers. The spherical outer ring raceway allows the bearing to tilt or swivel in response to misalignment, enabling it to self-align with the mating components.

  • Rolling Element Design:

The rolling elements in self-aligning bearings are carefully designed to facilitate misalignment compensation. For example, spherical roller bearings have barrel-shaped rollers, while self-aligning ball bearings have two rows of balls. These rolling elements can adjust their positions within the bearing, redistributing the load and accommodating misalignment between the shaft and the housing.

  • Internal Clearance:

Self-aligning bearings often have a larger internal clearance compared to fixed or non-self-aligning bearings. This additional clearance provides space for the bearing components to move and adjust their positions during misalignment. The internal clearance allows the bearing to properly distribute the load, reduce friction, and prevent excessive stress on the rolling elements and raceways.

  • Flexible Mounting:

Self-aligning bearings offer flexibility in their mounting arrangements. They can tolerate slight misalignments during installation, which simplifies the alignment process. This flexibility is particularly beneficial in applications where thermal expansion, shaft deflection, or other dynamic factors may cause misalignment during operation.

  • Load Distribution:

When misalignment occurs, self-aligning bearings distribute the load more evenly across the rolling elements and raceways. This even load distribution helps reduce localized stresses and minimizes the risk of premature failure. By accommodating misalignment, self-aligning bearings allow for smoother operation and improved reliability in machinery.

It’s important to note that while self-aligning bearings can compensate for certain degrees of misalignment, there are limits to their misalignment capability. Excessive misalignment beyond the bearing’s specified limits can lead to increased friction, reduced bearing life, and potential damage. Therefore, it is crucial to follow the manufacturer’s guidelines and recommendations regarding misalignment limits and operating conditions to ensure optimal performance and longevity of self-aligning bearings in machinery.

China OEM Deep Groove Ball Bearing Self-Aligning Ball Bearing Cylindrical Roller Bearing Angular Ball Bearing Auto Bearing Tapered Roller Bearing Thrust Ball Bearing   with Good qualityChina OEM Deep Groove Ball Bearing Self-Aligning Ball Bearing Cylindrical Roller Bearing Angular Ball Bearing Auto Bearing Tapered Roller Bearing Thrust Ball Bearing   with Good quality
editor by CX 2024-05-08

China wholesaler 10% off 22206 23218MW33c3 Ca MB Car Parts Bike Medicial Automotive Wheel Hub Clutch Tension Cylindrical Taper Spherical Self-Aligning Roller Bearing deep groove ball bearing

Product Description

 

Different type:

 

         
Designation Dimensions Basic Load Ratings Limiting Speed Mass
d D T B C r1 r  Cr  Cor
min. min. Dynamic Static
SFT mm kN Rpm g
35713 17 40 13.25 12 11 1 1 20.7 21.9 9  

546467 576467

  BAHB445539  

FC12571 GB4571 FC12784S03

IR-2220

C525 L29

DAC2552     HB-3080C/SBR   513116
DAC306E1 AU 0571 -4LL BAH/SBR IR-8622  
DAC3564     GB12807S03 GB40706 IR-8066 770309571
DAC37725717   527631   BA2B 633571CB        
DAC3772571   562398A   BAHB633531B BAHBC 439622C 540360 4TCRI-0868 De571 BA2B 309692 BA2B 35716 BAHB 35711 BAHB 311315BD 39BWD02 39BWD03CA69   IR-8052 IR-8111  
DAC3968 BAHB 311396B BAHB   BAHB311443B   GB12320 S02 IR-8095 Fw130
DAC40720637               51
DAC4074A   GB12399 S01 IR-8530 328723

 

DAC4571033   55580 539166     40BWD08AC55     51D 521771   BA2B633457 BAHB311424A BAHB309245 BAHB603694A BAHB633196 BAHB633791   GB12571 IR-8061 IR-8509 513102 513112 LR571
DAC4276   BA2B35718 BA2B309609     IR-8515 513154
DAC4282   BA2B446047 BAHB446097 GB4571   GB12163S04 GB12875 GB4571 IR-8086 IR-8642 513073
DAC4282  
DAC458A   BAHB633960        
DAC4587

 

Do you prefer that we remind you ?

Immediate and free call/email back

2nd step: the outside diameter of the bearing

  •  
  • A / Put your bearing on the grid as shown in the diagram.
  •  
  • B / Mark the outline of the outer ring. For more convenience, use a pencil with a fine point.
  •  
  • C / For ease of reading, do not hesitate to draw lines to the axes and then take the measurement.

 

 

 

 

3rd step: the thickness of the bearing

  •  
  • A / In the same way as for the outer diameter and the bore, place your bearing on the edge on the grid as shown in the diagram.
  • B / Draw the outer contour.
  •  
  • C / For ease of reading, do not hesitate to draw lines to the axes and then take the measurement.

 

Conclusion :

You now have 3 measuring elements that will allow you to identify your bearing: the inside diameter (or bore), the outside diameter, and the thickness.

You can postpone these measurements in our bearing search tool on our website

FAQ

 1.How many is the MOQ of your company?
   Our company MOQ is 1pcs.
 

2.Could you accept OEM and customize?
   YES, OEM is accepted and we can customize for you according to sample or drawing. 

 

3.How do you guaranee the quality?
Evaluate the samples and drawings before production
Eva;iate the production process,and following it in schedual,guarantee the delievery time in time.
Evaluate the bearing dimension,clearance,noise,rotations of final productions.
Evaluate the fause products,block it and make an improve action.
 

 

4.Do you have stocks?
   YES, we have most of the bearings showing on made in china in stock,please contact us for order details.

 

5.Do you have only Hubs Wheel Auto Bearing?

    YES,we have more others types bearings,ANY BEARING YOU CAN THINK OF NOW,WE HAVE!

 

 
  /* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

Cage Type: Iron, Steel, Brass
Super Finished Rollers or Not: Both Are Available
Silver Chamfer or Black Chamfer: Both Are Available
OEM Available or Not: Available
Rolling Body: Roller Bearings
The Number of Rows: Single
Samples:
US$ 1/Piece
1 Piece(Min.Order)

|
Request Sample

Customization:
Available

|

Customized Request

self aligning bearing

Are there specific considerations for choosing self-aligning bearings in applications with challenging operating conditions or varying misalignment requirements?

Yes, there are specific considerations to take into account when choosing self-aligning bearings for applications with challenging operating conditions or varying misalignment requirements. Here’s a detailed explanation:

  • Operating Conditions:

When selecting self-aligning bearings for challenging operating conditions, it’s important to consider factors such as temperature, speed, load, and environmental conditions. High temperatures, extreme speeds, heavy loads, and harsh environments can all impact the performance and durability of the bearing. In such cases, it may be necessary to choose self-aligning bearings with special heat-resistant materials, high-speed capabilities, increased load-carrying capacity, or enhanced corrosion resistance. Additionally, proper lubrication selection and maintenance practices become crucial to ensure optimal performance and longevity of the bearings.

  • Misalignment Requirements:

Self-aligning bearings are specifically designed to accommodate misalignment between the shaft and the housing. However, different applications may have varying misalignment requirements. It’s important to consider the magnitude and type of misalignment that the bearing will experience. Some self-aligning bearings can accommodate larger misalignments, while others are designed for smaller or specific types of misalignments, such as angular or parallel misalignment. Understanding the misalignment characteristics of the application is essential to select the appropriate self-aligning bearings that can effectively handle the expected misalignment conditions.

  • Load Capacity and Dynamic Performance:

In applications with challenging operating conditions, it’s crucial to assess the load capacity and dynamic performance requirements of the self-aligning bearings. Heavy loads, shock loads, or vibrations can significantly affect the bearing’s performance and service life. It’s important to choose self-aligning bearings with adequate load-carrying capacity, high shock resistance, and robust construction to withstand the demanding conditions. Additionally, the dynamic performance of the bearing, including factors such as rotational speed, acceleration, and deceleration, should be carefully evaluated to ensure that the selected bearings can meet the application’s performance requirements.

  • Sealing and Contamination Prevention:

In challenging operating conditions, effective sealing and contamination prevention become crucial for self-aligning bearings. Dust, dirt, moisture, and other contaminants can significantly impact the bearing’s performance and service life. It’s important to select self-aligning bearings with appropriate sealing solutions, such as contact seals, non-contact seals, or hybrid seals, depending on the specific application requirements. These seals help prevent the ingress of contaminants and maintain the integrity of the bearing’s internal components, ensuring reliable operation even in harsh environments.

  • Lubrication and Maintenance:

Lubrication and maintenance practices are critical considerations for self-aligning bearings in challenging operating conditions. Proper lubrication selection, including the choice of lubricant type, viscosity, and replenishment frequency, is essential to ensure optimal bearing performance and minimize the risk of premature wear or failure. Additionally, adhering to appropriate maintenance practices, such as regular inspections, re-lubrication, and monitoring of operating conditions, can help identify any potential issues early on and prevent costly downtime or unexpected failures.

By considering these specific factors and requirements, engineers can choose the most suitable self-aligning bearings for applications with challenging operating conditions or varying misalignment requirements. Taking into account the unique demands of the application ensures optimal performance, durability, and reliability of the self-aligning bearings in even the most demanding environments.

self aligning bearing

Can self-aligning bearings be customized or modified for unique industrial needs?

Yes, self-aligning bearings can be customized or modified to meet unique industrial needs. Here’s a detailed explanation:

  • Customized Designs:

Manufacturers of self-aligning bearings often offer customization options to accommodate specific industrial requirements. These customization options can include:

  • Size and Dimensions: Self-aligning bearings can be customized to different sizes and dimensions, allowing them to fit specific equipment or space constraints within an industrial setting.
  • Load Capacity: Manufacturers can modify self-aligning bearings to handle higher or lower load capacities based on the unique demands of an application. This can involve altering the bearing’s internal geometry, material selection, or heat treatment processes.
  • Operating Conditions: Customizations can be madeto enhance the performance of self-aligning bearings in specific operating conditions. For example, the bearing’s materials, lubrication, or sealing arrangements can be tailored to withstand extreme temperatures, corrosive environments, or high levels of contamination.
  • Mounting Configurations: Self-aligning bearings can be customized to meet specific mounting requirements. This may involve modifying the bearing’s outer ring, inner ring, or flange configurations to ensure proper fit and alignment within a particular industrial setup.
  • Sealing and Protection: Manufacturers can provide customized sealing arrangements to prevent the ingress of contaminants or protect the bearing from harsh external conditions. This can include adding specialized seals, shields, or coatings to enhance the bearing’s durability and longevity.
  • Lubrication: The lubrication requirements of self-aligning bearings can be customized based on the application’s specific needs. Manufacturers can offer different lubrication options, such as solid lubricants or specialized greases, to optimize performance and minimize maintenance requirements.
  • Collaboration with Manufacturers:

When unique industrial needs arise, it is advisable to collaborate closely with the bearing manufacturer or consult with bearing experts. They can provide technical expertise and guidance to assess the specific requirements and propose suitable customizations or modifications to the self-aligning bearings.

It is important to note that customization or modification of self-aligning bearings may involve additional costs and lead time for manufacturing. Therefore, a thorough evaluation of the application’s needs, cost-benefit analysis, and discussions with the manufacturer are essential to determine the feasibility and effectiveness of the customization process.

By leveraging the customization options offered by bearing manufacturers and working in collaboration with experts, self-aligning bearings can be tailored to meet the unique demands of various industries, ensuring optimal performance, reliability, and longevity in specific industrial applications.

self aligning bearing

What are the common types of self-aligning bearings, such as spherical or barrel roller bearings?

There are several common types of self-aligning bearings, each offering unique features and advantages. Here’s a detailed explanation of some of the common types:

  • Spherical Roller Bearings:

Spherical roller bearings are one of the most common types of self-aligning bearings. They have a spherical outer ring raceway and two rows of barrel-shaped rollers positioned between the inner and outer rings. This design allows for the accommodation of misalignment and provides high radial load-carrying capacity. Spherical roller bearings are commonly used in heavy-duty applications, such as mining equipment, paper mills, and crushers.

  • Barrel Roller Bearings:

Barrel roller bearings, also known as toroidal roller bearings, have a barrel-shaped roller arrangement with a concave outer ring raceway and a convex inner ring raceway. This design enables the bearing to accommodate misalignment and axial displacement. Barrel roller bearings are suitable for applications with high radial loads and moderate axial loads, such as in conveyor systems, printing presses, and industrial gearboxes.

  • Self-Aligning Ball Bearings:

Self-aligning ball bearings consist of an inner ring with two rows of balls and an outer ring with a spherical raceway. The design allows for misalignment compensation and is particularly suited for applications with low to moderate radial loads and moderate axial loads. Self-aligning ball bearings are commonly used in electric motors, pumps, and automotive applications.

  • Self-Aligning Thrust Roller Bearings:

Self-aligning thrust roller bearings are designed to accommodate misalignment in applications with axial loads. They have a spherical rolling element between the shaft washer and the housing washer, allowing for misalignment compensation. These bearings are commonly used in applications such as screw conveyors, heavy machinery, and marine propulsion systems.

  • Adapter Sleeve Bearings:

Adapter sleeve bearings are a type of self-aligning bearing that incorporates an adapter sleeve, which facilitates easy mounting and dismounting of the bearing. They are commonly used in applications where frequent bearing replacement or adjustment is required. Adapter sleeve bearings are often employed in conveyor systems, agricultural machinery, and textile equipment.

These are just a few examples of common types of self-aligning bearings. Other variations and specialized designs exist to suit specific application requirements. It’s important to consider factors such as load capacity, operating conditions, and dimensional constraints when selecting the appropriate self-aligning bearing for a particular application.

China wholesaler 10% off 22206 23218MW33c3 Ca MB Car Parts Bike Medicial Automotive Wheel Hub Clutch Tension Cylindrical Taper Spherical Self-Aligning Roller Bearing   deep groove ball bearingChina wholesaler 10% off 22206 23218MW33c3 Ca MB Car Parts Bike Medicial Automotive Wheel Hub Clutch Tension Cylindrical Taper Spherical Self-Aligning Roller Bearing   deep groove ball bearing
editor by CX 2024-05-03

China Good quality Self Aligning Ball Bearing/1200 Etn9/Rolling Bearing/Taper Roller Bearing/Agricultural Bearing deep groove ball bearing

Product Description

Product Introduction
 

  Self aligning ball bearings are very suitable for applications where the shaft and bearing seat are misaligned. Self aligning ball bearings are designed to adapt to 3 degree deviations and minimize friction and frictional heat. Due to the relatively small contact angle, the axial load capacity of these bearings is lower than that of angular contact bearings, etc.

  Bearings can handle both static and dynamic misalignment. In addition, sealed self-aligning ball bearings can resist dust and other pollutants. Self aligning ball bearings have many applications, including mining, food processing, and large-scale production, such as in the textile industry.

*Construction of self-aligning ball bearings

The self-aligning ball bearing consists of an outer ring, an inner ring, a rolling element, a cage that accommodates the rolling element, and possible seals, which protect the rolling element and lubricant from contamination. Their design allows them to compensate for up to 3 degrees of misalignment between the shaft and housing components. The low friction inside the bearings will enable them to operate at higher speeds while generating much less heat than other bearings.

1. Outer ring

The outer ring of the bearing is a smooth spherical surface with no raceway. Due to the shape of the ring, the bearing can move slightly inside it, thereby adjusting for misalignment.

2. Inner circle

The inner ring of the self-aligning bearing consists of 2 raceways, which fix the ball and cage.

3. Rolling element and retainer

The retainer and inner ring fix the rolling elements of the self-aligning ball bearing in place. Due to the loose structure between the ball and the inner and outer rings, the friction force and frictional heat are both low. Usually, the cage is made of stamped steel, reinforced fiberglass, or machined brass.

4. Sealing

Self aligning sealed ball bearings can prevent dust and other pollutants from affecting rolling elements and lubricants. This greatly extends the service life of bearings, eliminates additional friction, and reduces maintenance costs and intervals.

*Advantages and disadvantages of self-aligning ball bearings

Ball bearings with self-aligning characteristics have many advantages compared to other types of bearings such as tapered bearings and deep groove ball bearings. However, the load-bearing capacity of self-aligning ball bearings is not as high as traditional ball bearings.

1. Advantages

(1) Misalignment

Self aligning ball bearings can offset up to

3 degree static and dynamic misalignment.

(2) Service life

Compared to other types of ball bearings, these bearings have high-speed performance and generate less heat and friction. This allows them to operate at lower temperatures and extend their lifespan while reducing maintenance.

(3) Light load performance

This type of bearing has low load requirements, which means they can perform well even under light loads.

(4) Low noise

Self aligning ball bearings generate low noise levels due to the loose fit between the rolling element and the outer ring. This makes them particularly suitable for household items such as fans.

2. Disadvantages

(1) Load type

The ball bearing on the self-aligning ball bearing is installed at a relatively straight angle between the inner and outer rings. This makes them suitable for handling radial loads rather than axial loads.

(2) Load capacity

Due to the small axial load contact point of the self-aligning ball bearing, it can withstand relatively small axial loads. If it is necessary to carry heavy loads, it is recommended to use self-aligning roller bearings with the same self-aligning characteristics.

3. Installation of self-aligning bearings

Tight sleeves are commonly used for installing self-aligning ball bearings.

To install these bearings correctly, please follow the following steps:

(1) Packaging with protective film can prevent external influences from interacting with components during transportation. Ensure to remove these films before installing the bearings.

(2) Apply engine oil or grease to the outer surface of the bearing.

(3) Use oil to lubricate the adapter.

(4) Slightly open the adapter and use the expander tool to slide it CZPT the shaft.

(5) After the adapter is in the correct position, place the bearing on the locking sleeve. To place the bearings in the correct position, if the shaft has threads, use nuts; If not, please use a bearing pusher kit or a small mallet.

(6) Ensure that the bearing can rotate on the outer ring after being in place. It should not be possible to rotate, but it should be possible to rotate freely.

(7) By removing the nut, placing the washer, and reinstalling the nut, lock the bearing in place with a locking washer.

Attention: If the locking sleeve is loose or not fully fixed in place, the inner ring of the locking sleeve will start to rotate. As a result, excessive friction may occur between these 3 components, leading to damage to the shaft, adapter, and bearings.

*Selection criteria for self-aligning bearings

The selection of self centering bearings is mainly based on the consideration of possible centering problems, as well as the application speed, load type, load size, tolerance, and bearing size.

1. Misalignment

Bearings with self-aligning ability are usually necessary.

When there may be misalignment of the shaft, self-aligning ball bearings are a good solution. Please remember that most self-aligning bearings can only handle misalignment of 3 degrees or less. Any deviation above this requires more customized bearings.

2. Speed

Compared to traditional bearings, self-aligning bearings can operate at higher speeds. For high-speed applications, self-aligning bearings are an excellent choice. However, lubrication and bearing size are also factors that affect speed. Therefore, it is also important to consider the speed, lubrication type, and load requirements of the machine. The operating speed of grease lubrication is slower than that of oil lubrication.

3. Load

Automatic self-aligning bearings are suitable for radial loads, but they are not suitable for axial loads due to their small contact angle. When choosing bearings, it is important to take this into consideration.

4. Sealing type and lubrication

If the bearings have open or shielded seals, lubrication procedures may be required. Otherwise, sealed bearings are usually pre lubricated.

5. Other

Select bearing size based on speed requirements, load type, load capacity, shaft size, and housing size.shaft size, and housing size.

Model Basic Dimensions   (mm) Basic Dynamic load rating  (kn) Rated Speed     ( r/min)
Inner Diameter Outer Diameter Width Trends static state Reference speed Limiting Speeds
1200 ETN9 10 30 9 5.53 1.18 56 000 36 000
1201 ETN9 12 32 10 6.24 1.43 50 000 32 000
1202 ETN9 15 35 11 7.41 1.76 45 000 28 000
1203 ETN9 17 40 12 8.84 2.2 38 000 24 000
1204 ETN9 20 47 14 12.7 3.4 32 000 20 000
1205 ETN9 25 52 15 14.3 4 28 000 18 000
1206 ETN9 30 62 16 15.6 4.65 24 000 15 000
1207 ETN9 35 72 17 19 6 20 000 13 000
1208 ETN9 40 80 18 19.9 6.95 18 000 11 000
1209 ETN9 45 85 19 22.9 7.8 17 000 11 000
1210 ETN9 50 90 20 26.5 9.15 16 000 10 000
1211 ETN9 55 100 21 27.6 10.6 14 000 9 000
1212 ETN9 60 110 22 31.2 12.2 12 000 8 000
1213 ETN9 65 120 23 35.1 14 11 000 7 000
1214 ETN9 70 125 24 35.8 14.6 11 000 7 000

FAQ
 

1.What is the minimum order quantity for this product?
Can be negotiated, we will try our best to meet customer needs.Our company is mainly based on wholesale sales, most customers’orders are more than Over 500 sets.

2.What is your latest delivery time?
Most orders will be shipped within 3-5 days of payment being received.

3.Does your company have quality assurance?
Yes, for 1 years.

4.Are you a factory or a trading company?
We have our own cooperative factory, and our business type is a combination of manufacturing and trading.

5.What is the competitiveness of your company’s products compared to other companies?
High precision, high speed, low noise.

6.What are the advantages of your company’s services compared to other companies?
Answer questions online 24 hours a day, reply in a timely manner,  100% after-sales service.

7.Which payment method does your company support?
Do our best to meet customer needs, Can be negotiated.

8.How to contact us quickly?
Please send us an inquiry or message and leave your other contact information, we will contact you as soon as possible and provide the detailed information you need.

/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

Separated: Separable
Rows Number: Double Column
Holder: Non Metallic
Customization:
Available

|

Customized Request

.shipping-cost-tm .tm-status-off{background: none;padding:0;color: #1470cc}

Shipping Cost:

Estimated freight per unit.







about shipping cost and estimated delivery time.
Payment Method:







 

Initial Payment



Full Payment
Currency: US$
Return&refunds: You can apply for a refund up to 30 days after receipt of the products.

self aligning bearing

How do innovations and advancements in self-aligning bearing technology impact their use?

Advancements and innovations in self-aligning bearing technology have a significant impact on their use in various industries. Here’s a detailed explanation:

  • Improved Performance:

Innovations in self-aligning bearing technology often result in improved performance characteristics. These advancements can include:

  • Load Capacity: New bearing designs and materials can enhance the load-carrying capacity of self-aligning bearings, allowing them to withstand higher loads or operate under more demanding conditions.
  • Speed Capability: Advancements in bearing manufacturing techniques and materials can increase the maximum rotational speed at which self-aligning bearings can operate effectively, enabling their use in high-speed applications.
  • Friction Reduction: Innovations in bearing design, lubrication, and surface treatments contribute to reducing friction and energy losses, resulting in improved efficiency and reduced operating costs.
  • Sealing and Contamination Resistance: New sealing technologies and materials can enhance the sealing performance of self-aligning bearings, providing better protection against contaminants, moisture, and harsh environmental conditions.
  • Temperature and Corrosion Resistance: Advances in bearing materials and coatings enable self-aligning bearings to withstand extreme temperatures, aggressive chemicals, and corrosive environments, expanding their range of applications.
  • Extended Service Life:

Innovations in self-aligning bearing technology often result in improved durability and longevity. These advancements can include:

  • Materials: The development of new bearing materials, such as advanced steels, ceramics, or composites, can significantly enhance the bearing’s resistance to wear, fatigue, and surface damage, leading to extended service life.
  • Lubrication: Advancements in lubrication technologies, such as the use of solid lubricants or advanced grease formulations, can provide better film formation, reduce friction, and minimize wear, thereby increasing the bearing’s operating life.
  • Surface Treatments: Innovative surface treatments, such as coatings or finishes, can improve the bearing’s resistance to corrosion, wear, and fretting, contributing to longer service intervals and reduced maintenance requirements.
  • Condition Monitoring: The integration of sensor technologies and data analytics in self-aligning bearings enables real-time monitoring of operating conditions, allowing for proactive maintenance and early detection of potential failures, thus maximizing the bearing’s service life.
  • Application Expansion:

Advancements in self-aligning bearing technology often lead to an expansion of their application range. These advancements can include:

  • New Industries: Innovations in self-aligning bearing technology can enable their use in industries or applications where they were previously not feasible. This opens up opportunities in emerging sectors, such as renewable energy, electric vehicles, robotics, or medical devices.
  • Challenging Environments: Improved performance characteristics, such as enhanced sealing, temperature resistance, or contamination resistance, allow self-aligning bearings to be deployed in challenging environments, including offshore installations, high-temperature processes, or chemically aggressive applications.
  • Specialized Applications: Advancements in self-aligning bearing technology can lead to the development of specialized bearing variants tailored for specific applications, such as high-speed machining, precision equipment, or demanding industrial automation systems.

Overall, innovations and advancements in self-aligning bearing technology bring about enhanced performance, extended service life, and expanded application possibilities. These advancements drive improvements in industrial productivity, reliability, and efficiency, making self-aligning bearings a valuable component in a wide range of industries and applications.

self aligning bearing

Can you explain the installation and alignment considerations for self-aligning bearings?

Proper installation and alignment are crucial for the optimal performance and longevity of self-aligning bearings. Here’s a detailed explanation of the installation and alignment considerations:

  • Pre-Installation Preparation:

Prior to the installation of self-aligning bearings, it is essential to ensure a clean and suitable working environment. Here are some key considerations:

  • Cleanliness: The work area should be clean and free from dust, dirt, and contaminants to prevent the ingress of foreign particles during the installation process.
  • Tools and Equipment: Prepare the necessary tools and equipment required for the installation, including suitable lifting devices, torque wrenches, and lubrication apparatus.
  • Inspection: Thoroughly inspect the bearing and its components for any signs of damage or defects. Replace any worn or damaged parts before proceeding with the installation.
  • Lubrication: Apply the recommended lubricant to the bearing and ensure that it is properly distributed before installation. Lubrication helps reduce friction, prevent excessive wear, and facilitate smooth operation.
  • Mounting Considerations:

When mounting self-aligning bearings, it is important to follow certain guidelines to ensure proper fit and alignment:

  • Shaft and Housing Tolerances: Check the shaft and housing tolerances to ensure they comply with the specifications provided by the bearing manufacturer. Proper tolerances help achieve the correct fit and prevent excessive clearance or interference.
  • Shaft and Housing Preparation: Clean the shaft and housing surfaces and remove any burrs or rough edges that could interfere with the bearing’s seating. Ensure that the shaft and housing are machined to the recommended tolerances and finishes.
  • Mounting Method: There are various methods for mounting self-aligning bearings, including press fitting, thermal expansion, and hydraulic mounting. Follow the manufacturer’s instructions and recommended mounting method to ensure a secure and accurate fit.
  • Sealing: If the self-aligning bearing has integral seals or shields, ensure that they are correctly positioned and aligned during installation. Proper sealing helps protect the bearing against contaminants and extends its service life.
  • Tightening: When tightening the bearing onto the shaft or in the housing, use the recommended torque values provided by the manufacturer. Over-tightening can lead to excessive preload or damage, while under-tightening can result in insufficient seating and compromised performance.
  • Alignment Considerations:

Proper alignment is crucial for self-aligning bearings to function optimally. Here are some alignment considerations:

  • Angular Misalignment: Self-aligning bearings can accommodate angular misalignment to a certain degree. However, it is important to keep the misalignment within the manufacturer’s specified limits to prevent excessive stress and premature wear.
  • Shaft Deflection: Consider the potential shaft deflection that may occur during operation and ensure that the self-aligning bearing can handle the expected deflection without exceeding its capacity. This may involve selecting a bearing with appropriate load-carrying capacity and considering additional support or stabilization measures.
  • Alignment Verification: After installation, verify the alignment of the self-aligning bearing by measuring the axial and radial runout using appropriate alignment tools. Adjust the positioning if necessary to achieve the desired alignment within the specified tolerances.

By following these installation and alignment considerations, you can ensure the proper fit, alignment, and performance of self-aligning bearings. Adhering to the manufacturer’s guidelines and best practices helps maximize the lifespan and reliability of the bearings in various applications.

self aligning bearing

Can you explain the advantages and unique features of self-aligning bearings?

Self-aligning bearings offer several advantages and unique features that make them suitable for a wide range of applications. Here’s a detailed explanation of the advantages and unique features of self-aligning bearings:

  • Misalignment Compensation:

One of the primary advantages of self-aligning bearings is their ability to accommodate misalignment between the shaft and the housing. This includes angular misalignment, axial misalignment, and shaft deflection. The self-aligning design allows the bearing to adjust its position and compensate for these misalignments, ensuring smooth operation and reducing stress on the bearing components.

  • Reduced Friction and Wear:

Self-aligning bearings help reduce friction and wear in machinery. By accommodating misalignment, they distribute the load more evenly across the rolling elements and raceways, minimizing localized stresses. This results in lower friction, reduced wear, and longer bearing life. Additionally, the self-aligning capability helps prevent excessive heat generation, which can further contribute to reduced friction and wear.

  • Shock and Vibration Absorption:

Self-aligning bearings have the unique ability to absorb shocks and vibrations that occur during operation. The spherical outer ring raceway allows the bearing to move and adjust its position, effectively dampening the impact of shocks and vibrations. This helps improve the overall stability of the machinery, reduces the transmission of vibrations, and protects other components from excessive forces.

  • Easy Installation and Maintenance:

Self-aligning bearings are relatively easy to install and maintain. During installation, their self-aligning capability simplifies the alignment process, as slight misalignments can be accommodated. This saves time and effort in achieving precise alignment. Additionally, self-aligning bearings are typically designed for easy maintenance, allowing for straightforward tasks such as re-greasing or replacement without requiring complex disassembly.

  • Wide Application Range:

Self-aligning bearings are versatile and find applications in various industries and machinery. They are commonly used in applications where misalignment is expected, such as in heavy machinery, conveyor systems, agricultural equipment, and mining operations. The ability to accommodate misalignment makes self-aligning bearings suitable for challenging environments and dynamic operating conditions.

  • Cost-Effective Solution:

Self-aligning bearings offer a cost-effective solution in many applications. Their ability to compensate for misalignment helps prevent premature failure and reduces the need for frequent maintenance or realignment. This can result in cost savings by extending the bearing’s service life, improving overall machinery reliability, and reducing downtime for repairs or replacements.

In summary, self-aligning bearings provide advantages such as misalignment compensation, reduced friction and wear, shock and vibration absorption, easy installation and maintenance, wide application range, and cost-effectiveness. These unique features make them a valuable choice for various industries and applications where misalignment and dynamic operating conditions are present.

China Good quality Self Aligning Ball Bearing/1200 Etn9/Rolling Bearing/Taper Roller Bearing/Agricultural Bearing   deep groove ball bearingChina Good quality Self Aligning Ball Bearing/1200 Etn9/Rolling Bearing/Taper Roller Bearing/Agricultural Bearing   deep groove ball bearing
editor by CX 2024-04-30

China Standard High Load Capacity Self-Aligning Ball Bearing 2217K 2218K 2219K 2220K 2222K with 110X200X53 mm to Reduce Friction for Metallurgy deep groove ball bearing

Product Description

High load capacity self-aligning ball bearing 2217K 2218K 2219K 2220K 2222K with 110x200x53 mm to reduce friction for metallurgy

Self aligning ball bearings mainly bear radial loads and can also withstand small axial loads. The axial displacement of the
shaft (shell) is limited within the clearance limit, with automatic centering performance, allowing normal operation under
conditions of relatively small internal and external inclination. It is suitable for components where the support seat hole cannot strictly guarantee coaxiality. Self aligning ball bearings are suitable for bearing heavy and impact loads, precision instruments,low noise motors, automobiles, motorcycles, metallurgy, rolling mills, mines, petroleum, papermaking, cement, sugar squeezing and other industries, as well as general machinery.

Type

BALL

Structure

Self-Aligning

Applicable Industries

Food Shop, Energy & Mining, Food & Beverage Shops, Advertising Company

Precision Rating

P0 P6 P5 P4 P2

Seals Type

OPEN OR SEAL

Number of Row

Double row

Product name

Self-aligning Roller Bearing

      

Product Parameters

Bearing No Dimensionmm) MabB(kg Bearing No Dimension(mm) Mass(kg
d  D B d D B
1200 10  30 9 0.035 1300 10   35 11 0.060
1201 12  32 10 0.042 1301 12   37 12 0.070
1202 15  35 11 0.051 1302 15   42 13 0.100
1203 17  40 12 0.076 1303 17   47 14 0.140
1204 20  47 14 0.120 1304 20   52 15 0.170
1206 25  52 15 0.140 1305 25   62 17 0.260
1206 30  62 16 0.230 1306 30   72 19 0.400
1207 35  72 17 0.320 1307 35   80 21 0.540
1208 40  80 18 0.410 1308 40   90 23 0.710
1209 45  85 19 0.490 1309 45  100 25 0.960
1210 50  90 20 0.540 1310 50  110 27 1.210
1211 55  100 21 0.720 1311 55  120 29 1.580
1212 60  110 22 0.900 1312 60  180 31 1.90
1213 65  120 23 0.920 1313 65  140 33 2.390
1214 70  125 24 1.290 1314 70  150 35 3.000
1215 75  130 25 1.350 1315 75  160 37 3.600
1216 80  140 26 1.650 1316 80  170 39 4.200
1217 85  150 28 2.100 2300 10   35 17 0.090
2200 10  30 14 0.050 2301 12   37 17 0.100
2201 12  32 14 0.053 2302 15   42 17 0.110
2202 15  35 14 0.600 2303 17   47 19 0.170
2203 17  40 16 0.090 2304 20   52 21 0.220
2204 20  47 18 0.150 2305 25   62 24 0.350
2205 25  52 18 0.190 2306 50   72 27 0.500
2206 80  62 20 0.260 2307 35   80 31 0.680
2207 35  72 23 0.440 2308 40   90 33 0.930
2208 40  90 23 0.530 2309 45  100 36 1.250
2209 45  85 23 0.550 2310 50  110 40 1.640
2210 50  90 23 0.680 2311 55  120 43 2.100
2211 55  100 25 0.810 2312 60  130 46 2.600
2212 60  110 28 1.100 2313 65  140 48 3.200
2213 65  120 31 1.500 2314 70  150 51 3.900
2214 70  125 31 1.620 2315 75  160 55 4.700
2215 75  130 31 1.720          

 

Applications:

  • Industrial fans
  • Agriculture
  • Material handling
  • Food and beverage
  • Pulp and paper

Detailed Photos

Our Advantages

1.Free Sample bearing

2.ISO Standard

3.Bearing Small order accepted

4.In Stock bearing

5.OEM bearing service

6.Professional:16 years manufacture bearing

7.Customized bearing, Customer’s bearing drawing or samples accepted

8.Competitive price bearing

9.TT Payment or Western Union or Trade Assurance Order

 

****More produce***

Packaging & Shipping

 

Why choose us ?

1. Quality Control To ensure the quality of our vehicles and other products, Our QC staffs do strict supplier evaluations, in-coming inspections, in-process inspections, final inspections and pre-delivery inspections. The most important is that we listen to what our customers say and are always looking for ways to improve the quality of our products through continuous improvement.

2. OEM Ability We have built stable and long-term cooperate relationshilp with supermarkets,we canalso provide ODM, OEM and Agent services to our customers over the world.

3. Parts Available We have spare bearings for immediate delivery to anywhere in the world. Our Bearings widely used in the fields of motor, fan, injection molding machine, mining, mechanical equipment, metallurgy, rolling, automobile, railway, iron and steel, power, textile, packaging, petroleum, paper making, etc

4. Good Warranty We take customer satisfaction and product quality as the first priority for us. We supply reliable warranties and good after-sales services.

 

FAQ

*Q:Can I get samples from you?

A:We are honored to offer you samples for quality check.

*Q:What parts are manufactured by you?
A: :90% of bearings are manufactured by us.  

*Q:What’s the leading time? (How long do you need to prepare my goods?)
A:10 days for sample orders. 30 days for mass production orders (based on different quantities)

*Q:How long do I need to wait before my goods arrive?
A:3-5 days for international express. 5-7 days for air transportation, 35-40 days for sea transportation.

*Q:Can you put my brand name (logo) on these products?
A: Yes, or container order. Sticker order qty over 100pcs.

*Q:What payment methods do you accept?
A:T/T, L/C, Western Union, etc.

*Q:What certificates do you have?
A: All of our products are with CE IAF certificate. For some models, the certificates are already available. For other models, we will need your assistance to apply the certificates. For some models, the certificates are already available. For other models, we will need your assistance to apply the certificates.

*Q:What is your product quality?
A:Our raw materials are purchased from qualified suppliers. And we have a strong quality control team to guarantee our quality. We always care what you care!!

*Q:What is your warranty?
A:Our warranty is 24 months after delivery. We always pay high attention to after sale service!! For those out of warranty, we have adequate parts.
Electrical and easy wear parts are not included in warranty range.

*Q:How are parts availability?
A:We keep stock of spare parts and make sure all parts available whenever you need.
 

Factory Display

 

 

 

  /* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

Hardness: HRC60-63
Available: DDU, Zz, VV, Open, Nr, M, C0, C2, C3, C4
Quanlity: P0, P6, P5, P4, P2, Z1V1, Z2V2, Z3V3
Samples:
US$ 0/Piece
1 Piece(Min.Order)

|

Order Sample

Customization:
Available

|

Customized Request

.shipping-cost-tm .tm-status-off{background: none;padding:0;color: #1470cc}

Shipping Cost:

Estimated freight per unit.







about shipping cost and estimated delivery time.
Payment Method:







 

Initial Payment



Full Payment
Currency: US$
Return&refunds: You can apply for a refund up to 30 days after receipt of the products.

self aligning bearing

How do self-aligning bearings enhance the overall efficiency and functionality of machinery and equipment?

Self-aligning bearings play a crucial role in enhancing the overall efficiency and functionality of machinery and equipment. Here’s a detailed explanation:

  • Compensation for Misalignment:

One of the key benefits of self-aligning bearings is their ability to compensate for misalignment between the shaft and the housing. Misalignment can occur due to various factors such as shaft deflection, thermal expansion, or mounting errors. Self-aligning bearings have the capability to accommodate angular misalignment, axial displacement, and shaft deflection, ensuring smooth operation even in challenging conditions. By accommodating misalignment, self-aligning bearings minimize stress and wear on other components, reducing the risk of premature failure and improving overall machinery efficiency.

  • Reduced Friction and Energy Consumption:

Self-aligning bearings are designed to operate with low friction, which helps to reduce energy consumption within the machinery or equipment. The rolling elements and raceways of self-aligning bearings are precisely engineered to minimize contact friction. This reduced friction results in lower power losses, allowing the machinery to operate more efficiently and potentially leading to energy savings.

  • Increased Reliability and Service Life:

Self-aligning bearings contribute to the overall reliability and service life of machinery and equipment. By accommodating misalignment and reducing friction, they help to distribute loads evenly, minimize stress concentrations, and prevent premature wear and failures. This improved load distribution and reduced friction can extend the service life of other critical components, such as gears, shafts, and seals. Additionally, self-aligning bearings often feature robust designs and high-quality materials, further enhancing their durability and reliability in demanding operating conditions.

  • Enhanced Performance in Challenging Environments:

Self-aligning bearings are well-suited for applications in challenging environments. They can withstand conditions such as high temperatures, extreme speeds, or contaminated operating conditions. The ability to accommodate misalignment and the use of specialized bearing materials and lubricants enable self-aligning bearings to maintain their performance and functionality in adverse conditions. This enhances the overall efficiency and reliability of machinery and equipment in industries such as mining, steel, paper, and food processing.

  • Ease of Installation and Maintenance:

Self-aligning bearings are designed for ease of installation and maintenance. Their self-aligning capability simplifies the alignment process during installation, reducing the time and effort required. Additionally, self-aligning bearings often feature integrated seals or shields that help to protect against contamination and retain lubrication, resulting in reduced maintenance requirements. The ease of installation and maintenance of self-aligning bearings contributes to the overall efficiency of machinery and equipment by minimizing downtime and improving overall operational productivity.

Overall, self-aligning bearings enhance the efficiency and functionality of machinery and equipment by accommodating misalignment, reducing friction and energy consumption, increasing reliability and service life, performing well in challenging environments, and enabling easier installation and maintenance. By incorporating self-aligning bearings into their designs, engineers and equipment manufacturers can optimize performance, reduce downtime, and improve the overall efficiency of their machinery and equipment.

self aligning bearing

Can you explain the installation and alignment considerations for self-aligning bearings?

Proper installation and alignment are crucial for the optimal performance and longevity of self-aligning bearings. Here’s a detailed explanation of the installation and alignment considerations:

  • Pre-Installation Preparation:

Prior to the installation of self-aligning bearings, it is essential to ensure a clean and suitable working environment. Here are some key considerations:

  • Cleanliness: The work area should be clean and free from dust, dirt, and contaminants to prevent the ingress of foreign particles during the installation process.
  • Tools and Equipment: Prepare the necessary tools and equipment required for the installation, including suitable lifting devices, torque wrenches, and lubrication apparatus.
  • Inspection: Thoroughly inspect the bearing and its components for any signs of damage or defects. Replace any worn or damaged parts before proceeding with the installation.
  • Lubrication: Apply the recommended lubricant to the bearing and ensure that it is properly distributed before installation. Lubrication helps reduce friction, prevent excessive wear, and facilitate smooth operation.
  • Mounting Considerations:

When mounting self-aligning bearings, it is important to follow certain guidelines to ensure proper fit and alignment:

  • Shaft and Housing Tolerances: Check the shaft and housing tolerances to ensure they comply with the specifications provided by the bearing manufacturer. Proper tolerances help achieve the correct fit and prevent excessive clearance or interference.
  • Shaft and Housing Preparation: Clean the shaft and housing surfaces and remove any burrs or rough edges that could interfere with the bearing’s seating. Ensure that the shaft and housing are machined to the recommended tolerances and finishes.
  • Mounting Method: There are various methods for mounting self-aligning bearings, including press fitting, thermal expansion, and hydraulic mounting. Follow the manufacturer’s instructions and recommended mounting method to ensure a secure and accurate fit.
  • Sealing: If the self-aligning bearing has integral seals or shields, ensure that they are correctly positioned and aligned during installation. Proper sealing helps protect the bearing against contaminants and extends its service life.
  • Tightening: When tightening the bearing onto the shaft or in the housing, use the recommended torque values provided by the manufacturer. Over-tightening can lead to excessive preload or damage, while under-tightening can result in insufficient seating and compromised performance.
  • Alignment Considerations:

Proper alignment is crucial for self-aligning bearings to function optimally. Here are some alignment considerations:

  • Angular Misalignment: Self-aligning bearings can accommodate angular misalignment to a certain degree. However, it is important to keep the misalignment within the manufacturer’s specified limits to prevent excessive stress and premature wear.
  • Shaft Deflection: Consider the potential shaft deflection that may occur during operation and ensure that the self-aligning bearing can handle the expected deflection without exceeding its capacity. This may involve selecting a bearing with appropriate load-carrying capacity and considering additional support or stabilization measures.
  • Alignment Verification: After installation, verify the alignment of the self-aligning bearing by measuring the axial and radial runout using appropriate alignment tools. Adjust the positioning if necessary to achieve the desired alignment within the specified tolerances.

By following these installation and alignment considerations, you can ensure the proper fit, alignment, and performance of self-aligning bearings. Adhering to the manufacturer’s guidelines and best practices helps maximize the lifespan and reliability of the bearings in various applications.

self aligning bearing

How do self-aligning bearings differ from fixed or non-self-aligning bearings?

Self-aligning bearings differ from fixed or non-self-aligning bearings in several ways. Here’s a detailed explanation of the differences between these types of bearings:

  • Design and Construction:

The design and construction of self-aligning bearings are distinct from fixed or non-self-aligning bearings. Self-aligning bearings have a spherical outer ring raceway, which allows for misalignment compensation. In contrast, fixed or non-self-aligning bearings typically have a cylindrical or tapered outer ring raceway, designed for precise alignment between the shaft and the housing.

  • Misalignment Compensation:

The primary difference between self-aligning bearings and fixed or non-self-aligning bearings is their ability to compensate for misalignment. Self-aligning bearings can accommodate angular misalignment, axial misalignment, and shaft deflection, whereas fixed or non-self-aligning bearings have limited tolerance for misalignment and require precise alignment during installation.

  • Load Distribution:

Self-aligning bearings distribute the load more evenly across the rolling elements and raceways, thanks to their ability to accommodate misalignment. This helps reduce localized stresses and minimize the risk of premature failure. Fixed or non-self-aligning bearings, without the ability to compensate for misalignment, may experience uneven loading and increased stress on specific areas, leading to accelerated wear and potential failure.

  • Friction and Wear:

Due to their misalignment compensation capability, self-aligning bearings help reduce friction and wear. Misalignment in fixed or non-self-aligning bearings can cause increased friction and localized wear, leading to reduced bearing life. Self-aligning bearings distribute the load more evenly, minimizing friction and wear on the rolling elements and raceways, resulting in improved reliability and longevity.

  • Application Range:

The different design and misalignment compensation capability of self-aligning bearings make them suitable for a broader range of applications compared to fixed or non-self-aligning bearings. Self-aligning bearings are commonly used in applications where misalignment is expected, such as heavy machinery, conveyor systems, and mining equipment. Fixed or non-self-aligning bearings are typically employed in applications that require precise alignment, such as machine tools or high-precision equipment.

  • Installation and Maintenance:

Self-aligning bearings offer easier installation and maintenance compared to fixed or non-self-aligning bearings. The self-aligning capability of these bearings allows for more flexibility during the installation process, accommodating slight misalignments. In contrast, fixed or non-self-aligning bearings require careful alignment procedures to ensure proper functioning. Additionally, self-aligning bearings are often designed for easier maintenance, enabling tasks such as re-greasing or replacement without extensive disassembly.

In summary, self-aligning bearings differ from fixed or non-self-aligning bearings in their design, misalignment compensation capability, load distribution, friction and wear characteristics, application range, and ease of installation and maintenance. These differences make self-aligning bearings particularly suitable for applications where misalignment is expected or dynamic operating conditions are present.

China Standard High Load Capacity Self-Aligning Ball Bearing 2217K 2218K 2219K 2220K 2222K with 110X200X53 mm to Reduce Friction for Metallurgy   deep groove ball bearingChina Standard High Load Capacity Self-Aligning Ball Bearing 2217K 2218K 2219K 2220K 2222K with 110X200X53 mm to Reduce Friction for Metallurgy   deep groove ball bearing
editor by CX 2024-04-26

China high quality 23072cc/W33 Self-Aligning Roller Bearing 23072 Spherical Roller Bearings deep groove ball bearing

Product Description

Product Description

 

New Item Old Item Structure Specifications(dxDxT)mm Weight/kg
22207 3507 MB/CA/CC/EK/CK/CMW33 35x72x23 0.43
22208 3508 MB/CA/CC/E/K/CK/CMW33 40X80X23 0.55
22209 3509 MB/CA/CC/E/K/CK/CMW33 45X85X23 0.59
22210 3510 MB/CA/CC/E/K/CK/CMW33 50X90X23 0.64
22211 3511 MB/CA/CC/E/K/CK/CMW33 55X1 or 113000) with the rear code K30 and the 1:30 rear-mounted spherical roller bearing with the code name K30. When this type of bearing is matched with a conical shaft, the radial clearance of the bearing can be adjusted by moving the inner ring in the axial direction.

Mainly applicable cage: stamped steel plate reinforced cage (suffix E, very few in China). Stamped steel cage (suffix CC), glass fiber reinforced polyamide 66 cage (suffix TVPB), machined brass two-piece cage (suffix MB). Machined brass integral cage (suffix CA), stamped steel cage for vibration applications (suffix JPA). Brass cage (suffix EMA) for vibration applications. For the same structure, the code on the bearing may be different.

Main uses: papermaking machinery, reduction gear, railway vehicle axles, rolling mill gearbox bearing housings, rolling mill rolls, crushers, vibrating screens, printing machinery, woodworking machinery, various industrial reducers, vertical self-aligning bearings with seats .
Spherical roller bearings are the rolling-element bearings that permit rotation with low friction, and permit angular misalignment. Typically these bearings support a rotating shaft in the bore of the inner ring that may be misaligned in respect to the outer ring. The misalignment is possible due to the spherical internal shape of the outer ring and spherical rollers.

APPLICATION

Recommended Products

Company Profile

Packaging & Shipping

FAQ

Q: Are you trading company or manufacturer ?
A: We are factory. Welcome to visit our factory.

Q: How to get price ?
A: Please send inquiry directly. Our salesman replys very fast.

Q: Do you provide Free Samples ?
A: Yes, we could offer you free samples, but do not pay the cost of freight.

Q: What’s the MOQ ?
A: The MOQ depends on bearing’s model number and price.Usually the total cost will be $1000 at least.

Q: What’s your Payment Terms ?
A:  T/T (Bank Wire)
Western Union
Money Grame
Paypal

Q: How long is your lead-time?
A: Generally it is 2 to 4 days if the goods are in stock, or it will be about 6 to 15 days depends on quantity. /* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

Quality Level: P0/P6/P5/P4/P2
Number of Row: Double Row
Material1: Chrome Steel Gcr15
Cage: Double Row Ca Cc E MB Cage
Lubrication: Grease Lubrication
Feature: Low Noise. Long Life .High
Customization:
Available

|

Customized Request

self aligning bearing

Are there specific considerations for choosing self-aligning bearings in applications with challenging operating conditions or varying misalignment requirements?

Yes, there are specific considerations to take into account when choosing self-aligning bearings for applications with challenging operating conditions or varying misalignment requirements. Here’s a detailed explanation:

  • Operating Conditions:

When selecting self-aligning bearings for challenging operating conditions, it’s important to consider factors such as temperature, speed, load, and environmental conditions. High temperatures, extreme speeds, heavy loads, and harsh environments can all impact the performance and durability of the bearing. In such cases, it may be necessary to choose self-aligning bearings with special heat-resistant materials, high-speed capabilities, increased load-carrying capacity, or enhanced corrosion resistance. Additionally, proper lubrication selection and maintenance practices become crucial to ensure optimal performance and longevity of the bearings.

  • Misalignment Requirements:

Self-aligning bearings are specifically designed to accommodate misalignment between the shaft and the housing. However, different applications may have varying misalignment requirements. It’s important to consider the magnitude and type of misalignment that the bearing will experience. Some self-aligning bearings can accommodate larger misalignments, while others are designed for smaller or specific types of misalignments, such as angular or parallel misalignment. Understanding the misalignment characteristics of the application is essential to select the appropriate self-aligning bearings that can effectively handle the expected misalignment conditions.

  • Load Capacity and Dynamic Performance:

In applications with challenging operating conditions, it’s crucial to assess the load capacity and dynamic performance requirements of the self-aligning bearings. Heavy loads, shock loads, or vibrations can significantly affect the bearing’s performance and service life. It’s important to choose self-aligning bearings with adequate load-carrying capacity, high shock resistance, and robust construction to withstand the demanding conditions. Additionally, the dynamic performance of the bearing, including factors such as rotational speed, acceleration, and deceleration, should be carefully evaluated to ensure that the selected bearings can meet the application’s performance requirements.

  • Sealing and Contamination Prevention:

In challenging operating conditions, effective sealing and contamination prevention become crucial for self-aligning bearings. Dust, dirt, moisture, and other contaminants can significantly impact the bearing’s performance and service life. It’s important to select self-aligning bearings with appropriate sealing solutions, such as contact seals, non-contact seals, or hybrid seals, depending on the specific application requirements. These seals help prevent the ingress of contaminants and maintain the integrity of the bearing’s internal components, ensuring reliable operation even in harsh environments.

  • Lubrication and Maintenance:

Lubrication and maintenance practices are critical considerations for self-aligning bearings in challenging operating conditions. Proper lubrication selection, including the choice of lubricant type, viscosity, and replenishment frequency, is essential to ensure optimal bearing performance and minimize the risk of premature wear or failure. Additionally, adhering to appropriate maintenance practices, such as regular inspections, re-lubrication, and monitoring of operating conditions, can help identify any potential issues early on and prevent costly downtime or unexpected failures.

By considering these specific factors and requirements, engineers can choose the most suitable self-aligning bearings for applications with challenging operating conditions or varying misalignment requirements. Taking into account the unique demands of the application ensures optimal performance, durability, and reliability of the self-aligning bearings in even the most demanding environments.

self aligning bearing

Can self-aligning bearings be customized or modified for unique industrial needs?

Yes, self-aligning bearings can be customized or modified to meet unique industrial needs. Here’s a detailed explanation:

  • Customized Designs:

Manufacturers of self-aligning bearings often offer customization options to accommodate specific industrial requirements. These customization options can include:

  • Size and Dimensions: Self-aligning bearings can be customized to different sizes and dimensions, allowing them to fit specific equipment or space constraints within an industrial setting.
  • Load Capacity: Manufacturers can modify self-aligning bearings to handle higher or lower load capacities based on the unique demands of an application. This can involve altering the bearing’s internal geometry, material selection, or heat treatment processes.
  • Operating Conditions: Customizations can be madeto enhance the performance of self-aligning bearings in specific operating conditions. For example, the bearing’s materials, lubrication, or sealing arrangements can be tailored to withstand extreme temperatures, corrosive environments, or high levels of contamination.
  • Mounting Configurations: Self-aligning bearings can be customized to meet specific mounting requirements. This may involve modifying the bearing’s outer ring, inner ring, or flange configurations to ensure proper fit and alignment within a particular industrial setup.
  • Sealing and Protection: Manufacturers can provide customized sealing arrangements to prevent the ingress of contaminants or protect the bearing from harsh external conditions. This can include adding specialized seals, shields, or coatings to enhance the bearing’s durability and longevity.
  • Lubrication: The lubrication requirements of self-aligning bearings can be customized based on the application’s specific needs. Manufacturers can offer different lubrication options, such as solid lubricants or specialized greases, to optimize performance and minimize maintenance requirements.
  • Collaboration with Manufacturers:

When unique industrial needs arise, it is advisable to collaborate closely with the bearing manufacturer or consult with bearing experts. They can provide technical expertise and guidance to assess the specific requirements and propose suitable customizations or modifications to the self-aligning bearings.

It is important to note that customization or modification of self-aligning bearings may involve additional costs and lead time for manufacturing. Therefore, a thorough evaluation of the application’s needs, cost-benefit analysis, and discussions with the manufacturer are essential to determine the feasibility and effectiveness of the customization process.

By leveraging the customization options offered by bearing manufacturers and working in collaboration with experts, self-aligning bearings can be tailored to meet the unique demands of various industries, ensuring optimal performance, reliability, and longevity in specific industrial applications.

self aligning bearing

Can you explain the advantages and unique features of self-aligning bearings?

Self-aligning bearings offer several advantages and unique features that make them suitable for a wide range of applications. Here’s a detailed explanation of the advantages and unique features of self-aligning bearings:

  • Misalignment Compensation:

One of the primary advantages of self-aligning bearings is their ability to accommodate misalignment between the shaft and the housing. This includes angular misalignment, axial misalignment, and shaft deflection. The self-aligning design allows the bearing to adjust its position and compensate for these misalignments, ensuring smooth operation and reducing stress on the bearing components.

  • Reduced Friction and Wear:

Self-aligning bearings help reduce friction and wear in machinery. By accommodating misalignment, they distribute the load more evenly across the rolling elements and raceways, minimizing localized stresses. This results in lower friction, reduced wear, and longer bearing life. Additionally, the self-aligning capability helps prevent excessive heat generation, which can further contribute to reduced friction and wear.

  • Shock and Vibration Absorption:

Self-aligning bearings have the unique ability to absorb shocks and vibrations that occur during operation. The spherical outer ring raceway allows the bearing to move and adjust its position, effectively dampening the impact of shocks and vibrations. This helps improve the overall stability of the machinery, reduces the transmission of vibrations, and protects other components from excessive forces.

  • Easy Installation and Maintenance:

Self-aligning bearings are relatively easy to install and maintain. During installation, their self-aligning capability simplifies the alignment process, as slight misalignments can be accommodated. This saves time and effort in achieving precise alignment. Additionally, self-aligning bearings are typically designed for easy maintenance, allowing for straightforward tasks such as re-greasing or replacement without requiring complex disassembly.

  • Wide Application Range:

Self-aligning bearings are versatile and find applications in various industries and machinery. They are commonly used in applications where misalignment is expected, such as in heavy machinery, conveyor systems, agricultural equipment, and mining operations. The ability to accommodate misalignment makes self-aligning bearings suitable for challenging environments and dynamic operating conditions.

  • Cost-Effective Solution:

Self-aligning bearings offer a cost-effective solution in many applications. Their ability to compensate for misalignment helps prevent premature failure and reduces the need for frequent maintenance or realignment. This can result in cost savings by extending the bearing’s service life, improving overall machinery reliability, and reducing downtime for repairs or replacements.

In summary, self-aligning bearings provide advantages such as misalignment compensation, reduced friction and wear, shock and vibration absorption, easy installation and maintenance, wide application range, and cost-effectiveness. These unique features make them a valuable choice for various industries and applications where misalignment and dynamic operating conditions are present.

China high quality 23072cc/W33 Self-Aligning Roller Bearing 23072 Spherical Roller Bearings   deep groove ball bearingChina high quality 23072cc/W33 Self-Aligning Roller Bearing 23072 Spherical Roller Bearings   deep groove ball bearing
editor by CX 2024-04-24

China Best Sales 10% Majc Self-Aligning Angular Contact Special Housing Auto Steel Deep Groove Industrial Spherical Water Pump High Temperature Agriculture Ball Bearing bearing driver

Product Description

Packing and qulaity can be customzied from customer’s samples.plearse contact sales for more discussion.
 

 6 19.05 0.75

 

Do you prefer that we remind you ?

Immediate and free call/email back

2nd step: the outside diameter of the bearing

  •  
  • A / Put your bearing on the grid as shown in the diagram.
  •  
  • B / Mark the outline of the outer ring. For more convenience, use a pencil with a fine point.
  •  
  • C / For ease of reading, do not hesitate to draw lines to the axes and then take the measurement.

 

 

 

 

3rd step: the thickness of the bearing

  •  
  • A / In the same way as for the outer diameter and the bore, place your bearing on the edge on the grid as shown in the diagram.
  • B / Draw the outer contour.
  •  
  • C / For ease of reading, do not hesitate to draw lines to the axes and then take the measurement.

 

Conclusion :

You now have 3 measuring elements that will allow you to identify your bearing: the inside diameter (or bore), the outside diameter, and the thickness.

You can postpone these measurements in our bearing search tool on our website

FAQ

 1.How many is the MOQ of your company?
   Our company MOQ is 1pcs.
 

2.Could you accept OEM and customize?
   YES, OEM is accepted and we can customize for you according to sample or drawing. 

 

3.How do you guaranee the quality?
Evaluate the samples and drawings before production
Eva;iate the production process,and following it in schedual,guarantee the delievery time in time.
Evaluate the bearing dimension,clearance,noise,rotations of final productions.
Evaluate the fause products,block it and make an improve action.
 

 

4.Do you have stocks?
   YES, we have most of the bearings showing on made in china in stock,please contact us for order details.

 

5.Do you have only Hubs Wheel Auto Bearing?

    YES,we have more others types bearings,ANY BEARING YOU CAN THINK OF NOW,WE HAVE!

 

 

/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

Rotations: Smoothy
Lifetime: 1 Year Above
Quality Level: High Precision
Packing: Industrial or Single Box
Aligning: Non-Aligning Bearing
Separated: Unseparated
Samples:
US$ 1/Piece
1 Piece(Min.Order)

|
Request Sample

Customization:
Available

|

Customized Request

self aligning bearing

What are the eco-friendly or sustainable aspects of self-aligning bearing materials?

Self-aligning bearings can incorporate eco-friendly or sustainable aspects in their material composition. Here’s a detailed explanation:

  • Recyclable Materials:

Many self-aligning bearings are made from materials that are recyclable. Steel, which is commonly used for bearing rings and rolling elements, is highly recyclable and can be processed and reused multiple times without significant loss of properties. By choosing self-aligning bearings made from recyclable materials, the environmental impact associated with the disposal and production of bearings can be reduced.

  • Low Environmental Footprint:

The production of self-aligning bearings involves various manufacturing processes. Manufacturers often strive to optimize these processes to minimize energy consumption, reduce waste generation, and lower greenhouse gas emissions. By improving energy efficiency and reducing environmental footprint during production, self-aligning bearing manufacturers contribute to sustainable practices.

  • Reduced Material Consumption:

The design and development of self-aligning bearings focus on optimizing their performance while minimizing material consumption. Through advanced engineering techniques, including material selection, design optimization, and improved manufacturing processes, manufacturers can reduce the amount of material required to produce self-aligning bearings. This not only helps to conserve natural resources but also reduces the overall weight of the bearing, leading to lower energy consumption during operation.

  • Alternative Materials:

In recent years, there have been advancements in the development of alternative bearing materials that offer improved sustainability characteristics. For example:

  • Ceramic Bearings: Ceramic materials, such as silicon nitride or zirconia, are increasingly used in self-aligning bearings due to their excellent wear resistance, corrosion resistance, and high-temperature capabilities. Ceramic bearings can contribute to sustainability by reducing the need for lubrication, extending maintenance intervals, and minimizing the use of lubricants that may have environmental impacts.
  • Polymer Bearings: Self-aligning bearings made from polymer materials, such as reinforced plastics or engineered polymers, offer advantages such as self-lubrication, resistance to corrosion and chemicals, and reduced weight. Polymer bearings can provide sustainability benefits by eliminating the need for external lubrication, reducing friction and energy consumption, and offering potential for longer service life.
  • Extended Service Life:

Self-aligning bearings with extended service life contribute to sustainability by reducing the frequency of bearing replacements and associated waste generation. Advancements in bearing materials, surface treatments, and lubrication technologies have led to improved durability and longer operating life, resulting in reduced environmental impact and lower maintenance requirements.

It’s important to note that while self-aligning bearing materials can have eco-friendly or sustainable aspects, the overall sustainability of an application or system also depends on other factors, such as energy efficiency, proper maintenance practices, and end-of-life disposal considerations. Therefore, a holistic approach considering the entire lifecycle of the equipment and its components is essential for achieving sustainable practices.

self aligning bearing

How do self-aligning bearings perform in applications with varying loads and misalignment challenges?

Self-aligning bearings are specifically designed to perform exceptionally well in applications with varying loads and misalignment challenges. Here’s an in-depth explanation of their performance characteristics:

  • Misalignment Compensation:

Self-aligning bearings are capable of accommodating various types of misalignment, including angular misalignment and shaft deflection. They feature a design that incorporates two rows of rolling elements, such as balls or rollers, and a spherical outer ring raceway. This design allows the bearing to self-align, adapting to misalignment caused by factors such as shaft deflection, mounting errors, thermal expansion, and vibrations. Self-aligning bearings can handle misalignment within certain limits, maintaining proper alignment between the mating components and minimizing additional stresses on the bearing.

  • Load-Carrying Capacity:

Self-aligning bearings are engineered to handle high loads, both radial and axial. They have a robust construction with larger rolling elements and increased contact area, enabling them to distribute the load more effectively. This enhanced load-carrying capacity makes self-aligning bearings suitable for applications where varying loads are encountered. Whether it’s fluctuating radial loads, axial loads, or a combination of both, self-aligning bearings can handle the dynamic forces and provide reliable performance.

  • Flexibility and Versatility:

Self-aligning bearings offer flexibility and versatility in applications with varying loads and misalignment challenges. They can operate in conditions where shafts are not perfectly aligned or where there are slight shaft movements. This flexibility allows for easier installation and alignment adjustments, reducing the time and effort required for precise positioning of the bearing. Additionally, self-aligning bearings are available in different designs and configurations, including ball bearings and roller bearings, providing options to match specific application requirements.

  • Reduced Friction and Heat Generation:

Self-aligning bearings are designed to minimize friction and heat generation during operation. The rolling elements and raceways are precisely engineered to reduce contact stresses and optimize the distribution of forces. This results in lower friction levels and reduced heat buildup, enhancing the overall efficiency and reliability of the bearing in applications where varying loads and misalignment challenges are present.

  • Extended Service Life:

Due to their ability to accommodate misalignment and handle varying loads, self-aligning bearings contribute to an extended service life of the machinery. By reducing the stresses and excessive forces on the bearing and its surrounding components, self-aligning bearings help minimize wear, prevent premature failure, and increase the overall durability of the equipment.

In summary, self-aligning bearings excel in applications with varying loads and misalignment challenges. Their ability to compensate for misalignment, handle high loads, provide flexibility in installation, and reduce friction and heat generation makes them well-suited for industries such as mining, construction, paper manufacturing, steel production, and many others where these challenges are prevalent.

self aligning bearing

Can you explain the advantages and unique features of self-aligning bearings?

Self-aligning bearings offer several advantages and unique features that make them suitable for a wide range of applications. Here’s a detailed explanation of the advantages and unique features of self-aligning bearings:

  • Misalignment Compensation:

One of the primary advantages of self-aligning bearings is their ability to accommodate misalignment between the shaft and the housing. This includes angular misalignment, axial misalignment, and shaft deflection. The self-aligning design allows the bearing to adjust its position and compensate for these misalignments, ensuring smooth operation and reducing stress on the bearing components.

  • Reduced Friction and Wear:

Self-aligning bearings help reduce friction and wear in machinery. By accommodating misalignment, they distribute the load more evenly across the rolling elements and raceways, minimizing localized stresses. This results in lower friction, reduced wear, and longer bearing life. Additionally, the self-aligning capability helps prevent excessive heat generation, which can further contribute to reduced friction and wear.

  • Shock and Vibration Absorption:

Self-aligning bearings have the unique ability to absorb shocks and vibrations that occur during operation. The spherical outer ring raceway allows the bearing to move and adjust its position, effectively dampening the impact of shocks and vibrations. This helps improve the overall stability of the machinery, reduces the transmission of vibrations, and protects other components from excessive forces.

  • Easy Installation and Maintenance:

Self-aligning bearings are relatively easy to install and maintain. During installation, their self-aligning capability simplifies the alignment process, as slight misalignments can be accommodated. This saves time and effort in achieving precise alignment. Additionally, self-aligning bearings are typically designed for easy maintenance, allowing for straightforward tasks such as re-greasing or replacement without requiring complex disassembly.

  • Wide Application Range:

Self-aligning bearings are versatile and find applications in various industries and machinery. They are commonly used in applications where misalignment is expected, such as in heavy machinery, conveyor systems, agricultural equipment, and mining operations. The ability to accommodate misalignment makes self-aligning bearings suitable for challenging environments and dynamic operating conditions.

  • Cost-Effective Solution:

Self-aligning bearings offer a cost-effective solution in many applications. Their ability to compensate for misalignment helps prevent premature failure and reduces the need for frequent maintenance or realignment. This can result in cost savings by extending the bearing’s service life, improving overall machinery reliability, and reducing downtime for repairs or replacements.

In summary, self-aligning bearings provide advantages such as misalignment compensation, reduced friction and wear, shock and vibration absorption, easy installation and maintenance, wide application range, and cost-effectiveness. These unique features make them a valuable choice for various industries and applications where misalignment and dynamic operating conditions are present.

China Best Sales 10% Majc Self-Aligning Angular Contact Special Housing Auto Steel Deep Groove Industrial Spherical Water Pump High Temperature Agriculture Ball Bearing   bearing driverChina Best Sales 10% Majc Self-Aligning Angular Contact Special Housing Auto Steel Deep Groove Industrial Spherical Water Pump High Temperature Agriculture Ball Bearing   bearing driver
editor by CX 2024-04-15

China Best Sales China Manufacturer Radial Thrust Self-Aligning Deep Groove Angular Contact Insert Ball Bearings Units Cylindrical Tapered Spherical Needle Roller Bearings carrier bearing

Product Description

PRODUCT PICTURES


RELATED PRODUCTS

OUR SERVICES

We can provide manufacturing capabilities and services of regular bearings for you, or customized non-standard bearings as you required.

 BEARING:
  — Dimensions
  — Material
  — Tolerance standard

APPEARANCE:
  — Logo (Laser Marking)
  — Package Design

40+ YEARS EXPERIENCE 
CONTINUOUS AND STABLE DELIVERY OF PRODUCTS.

With over 40 years experience of the bearing manufacturing, we know how to make good bearings with less cost consistently and efficiently.

We use advanced CNC turning, grinding, and superfinishing machines to ensure high, stable, and accurate machining.  All of your goods, from the most economical category, to the highest rated category, will always be manufactured precisely to the standards you require.

OWN HEAT TREATMENT 
CONTROALLABLE COST AND QUALITY.

Heat treatment is 1 of the crucial processes to ensure high performance of bearing materials. Compared with other manufacturers, we can produce higher quality bearings at smaller cost, with a more flexible and controllable production schedule, and in a shorter time

We have 6 heat treatment production lines.

Bearings are heated uniformly, with small deformation and little/no oxidized decarburization, which can make them have high hardness, high fatigue resistance, good wear resistance, dimensional stability, and excellent mechanical strength.
 

OUTSTXIHU (WEST LAKE) DIS.  QUALITY
LOW NOISE, LOW FRICTION AND LONG LIFE.

All our products are characterized by low noise, low friction and long life.  This is due to our attention to the roundness, waviness and surface roughness of bearing raceway.

Our products fully meets the requirements of national and international standards according to the testing result of roughness, roundness, hardness, vibration noise, vibration velocity.

PACKING
PACKAGING THAT HELPS SELL.

1, Inner package
   Corrosion and Dust Proof PE plastic film  / bag packing + Tube packing, or Wrapping  tape for larger bearings.

2, Corrugated Individual Box
   Our attractive sales-helpful “3-JOYS” package, or as the design of your package.
3, Outer package
  Corrugated carton + Wooden pallet 

MODERN WELL-ORGANIZED WAREHOUSE

  · Constant temperature (20°C) and humidity (RH 52%) warehouse
  · Hundreds of models on hand, short delivery time.
 

HONOR & SYSTEM CERTIFICATES

EXHIBITION

SAMPLES POLICY 

 FREE SAMPLES AND SHIPPING

 We are happy to send you free samples of our bearings for field   testing. All transportation costs will be paid by us.

 Please note: Depending on the model and value of samples,   this policy may not apply!

 Please contact our sales staff for details.

TRANSPORTATION
FASTEST DELIVERY TO CUSTOMERS

CUSTOMERS FEEDBACK

PAYMENT TERMS 
To facilitate your payment, we offer a variety of options! 

    
 

FAQ

1, About the lead time.
 
This depends on several factors, like Is the production schedule tight? Is there a corresponding model in stock, and is there enough of this model in stock? How many pcs of that model would be ordered?
Simply speaking, based on a 20′ GP container load:

If the model your Preferred is Sufficient stock Lead Time
Regular models YES Within 7 days
Regular models NO Within 30 days
Non-regular model NO About 50 days

For accurate estimate, please contact with our sale stuff. Thanks.

2, Minimum order quantity. 
  

Even just ONE piece of bearing is ok for us.

  
3, If you don’t know which model is the right choice…
  

We would like to give you some advise if you like, according to the real situation and demand of your local market. Our purpose is to help you to get proper and right models for your customers, so that you would make a better sales and income finally.

4, Factory Inspection

We surely would welcome you or your representatives to come to our plants or working offices to take a good look and chat with our hardworking CZPT employees. Ask our sales stuff and she/he will arrange that for you.
  /* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

Contact Angle: 25°
Aligning: Non-Aligning Bearing
Separated: Unseperated/Seperated
Samples:
US$ 0/Piece
1 Piece(Min.Order)

|

Order Sample

Customization:
Available

|

Customized Request

.shipping-cost-tm .tm-status-off{background: none;padding:0;color: #1470cc}

Shipping Cost:

Estimated freight per unit.







about shipping cost and estimated delivery time.
Payment Method:







 

Initial Payment



Full Payment
Currency: US$
Return&refunds: You can apply for a refund up to 30 days after receipt of the products.

self aligning bearing

Are there specific considerations for choosing self-aligning bearings in applications with challenging operating conditions or varying misalignment requirements?

Yes, there are specific considerations to take into account when choosing self-aligning bearings for applications with challenging operating conditions or varying misalignment requirements. Here’s a detailed explanation:

  • Operating Conditions:

When selecting self-aligning bearings for challenging operating conditions, it’s important to consider factors such as temperature, speed, load, and environmental conditions. High temperatures, extreme speeds, heavy loads, and harsh environments can all impact the performance and durability of the bearing. In such cases, it may be necessary to choose self-aligning bearings with special heat-resistant materials, high-speed capabilities, increased load-carrying capacity, or enhanced corrosion resistance. Additionally, proper lubrication selection and maintenance practices become crucial to ensure optimal performance and longevity of the bearings.

  • Misalignment Requirements:

Self-aligning bearings are specifically designed to accommodate misalignment between the shaft and the housing. However, different applications may have varying misalignment requirements. It’s important to consider the magnitude and type of misalignment that the bearing will experience. Some self-aligning bearings can accommodate larger misalignments, while others are designed for smaller or specific types of misalignments, such as angular or parallel misalignment. Understanding the misalignment characteristics of the application is essential to select the appropriate self-aligning bearings that can effectively handle the expected misalignment conditions.

  • Load Capacity and Dynamic Performance:

In applications with challenging operating conditions, it’s crucial to assess the load capacity and dynamic performance requirements of the self-aligning bearings. Heavy loads, shock loads, or vibrations can significantly affect the bearing’s performance and service life. It’s important to choose self-aligning bearings with adequate load-carrying capacity, high shock resistance, and robust construction to withstand the demanding conditions. Additionally, the dynamic performance of the bearing, including factors such as rotational speed, acceleration, and deceleration, should be carefully evaluated to ensure that the selected bearings can meet the application’s performance requirements.

  • Sealing and Contamination Prevention:

In challenging operating conditions, effective sealing and contamination prevention become crucial for self-aligning bearings. Dust, dirt, moisture, and other contaminants can significantly impact the bearing’s performance and service life. It’s important to select self-aligning bearings with appropriate sealing solutions, such as contact seals, non-contact seals, or hybrid seals, depending on the specific application requirements. These seals help prevent the ingress of contaminants and maintain the integrity of the bearing’s internal components, ensuring reliable operation even in harsh environments.

  • Lubrication and Maintenance:

Lubrication and maintenance practices are critical considerations for self-aligning bearings in challenging operating conditions. Proper lubrication selection, including the choice of lubricant type, viscosity, and replenishment frequency, is essential to ensure optimal bearing performance and minimize the risk of premature wear or failure. Additionally, adhering to appropriate maintenance practices, such as regular inspections, re-lubrication, and monitoring of operating conditions, can help identify any potential issues early on and prevent costly downtime or unexpected failures.

By considering these specific factors and requirements, engineers can choose the most suitable self-aligning bearings for applications with challenging operating conditions or varying misalignment requirements. Taking into account the unique demands of the application ensures optimal performance, durability, and reliability of the self-aligning bearings in even the most demanding environments.

self aligning bearing

Can you provide examples of machinery or equipment that rely on self-aligning bearings for reliable operation?

Self-aligning bearings play a crucial role in ensuring the reliable operation of various types of machinery and equipment. Here are some examples of machinery and equipment that rely on self-aligning bearings:

  • Mining Equipment: Self-aligning bearings are used in mining equipment such as crushers, vibrating screens, and conveyor systems. These bearings help compensate for misalignment caused by heavy loads, vibrations, and uneven terrain, ensuring smooth operation and minimizing downtime in the mining industry.
  • Construction Machinery: Construction machinery, including excavators, loaders, and concrete mixers, rely on self-aligning bearings. These bearings accommodate misalignment caused by heavy loads, shock loads, and dynamic forces, enabling reliable performance and durability in demanding construction sites.
  • Paper Machines: Self-aligning bearings are essential components in paper machines, including the dryer section, press section, and calender rolls. These bearings compensate for misalignment caused by thermal expansion, high speeds, and varying loads, ensuring precise alignment and smooth operation throughout the paper manufacturing process.
  • Steel Rolling Mills: Self-aligning bearings are critical in steel rolling mills, where they support the heavy loads and high temperatures involved in the rolling process. These bearings accommodate misalignment caused by thermal expansion, roll deflection, and varying loads, ensuring the accuracy and efficiency of the rolling operations.
  • Printing Presses: Printing presses rely on self-aligning bearings in their rollers, cylinders, and other moving parts. These bearings compensate for misalignment caused by high-speed rotations, vibrations, and thermal effects, ensuring precise alignment and reliable operation in the printing industry.
  • Wind Turbines: Self-aligning bearings are crucial components in wind turbines, supporting the main shaft and rotor assembly. These bearings accommodate misalignment caused by wind gusts, turbine movements, and varying loads, enabling efficient power generation and prolonged service life of the wind turbine.
  • Automotive Wheel Hubs: Self-aligning bearings are used in automotive wheel hub assemblies, providing reliable rotation and supporting the vehicle’s weight. These bearings compensate for misalignment caused by uneven road surfaces, cornering forces, and thermal effects, ensuring safe and smooth operation of automotive vehicles.
  • Food Processing Equipment: Self-aligning bearings are employed in food processing equipment such as mixers, blenders, and conveyors. These bearings accommodate misalignment caused by varying loads, thermal effects, and sanitation processes, ensuring hygienic operation and reliability in food manufacturing facilities.

These are just a few examples of the machinery and equipment that rely on self-aligning bearings for reliable operation. Self-aligning bearings are utilized in a wide range of industries, including mining, construction, paper manufacturing, steel production, printing, renewable energy, automotive, and food processing, among others. Their ability to compensate for misalignment, handle high loads, and ensure smooth operation makes them indispensable components in numerous applications.

self aligning bearing

How do self-aligning bearings compensate for misalignment in machinery?

Self-aligning bearings are designed to compensate for misalignment in machinery, allowing them to accommodate angular misalignment, axial misalignment, and shaft deflection. Here’s a detailed explanation of how self-aligning bearings achieve misalignment compensation:

  • Spherical Outer Ring Raceway:

The key feature of self-aligning bearings is their spherical outer ring raceway. This raceway is designed to have a curvature that matches the spherical shape of the rolling elements, such as balls or rollers. The spherical outer ring raceway allows the bearing to tilt or swivel in response to misalignment, enabling it to self-align with the mating components.

  • Rolling Element Design:

The rolling elements in self-aligning bearings are carefully designed to facilitate misalignment compensation. For example, spherical roller bearings have barrel-shaped rollers, while self-aligning ball bearings have two rows of balls. These rolling elements can adjust their positions within the bearing, redistributing the load and accommodating misalignment between the shaft and the housing.

  • Internal Clearance:

Self-aligning bearings often have a larger internal clearance compared to fixed or non-self-aligning bearings. This additional clearance provides space for the bearing components to move and adjust their positions during misalignment. The internal clearance allows the bearing to properly distribute the load, reduce friction, and prevent excessive stress on the rolling elements and raceways.

  • Flexible Mounting:

Self-aligning bearings offer flexibility in their mounting arrangements. They can tolerate slight misalignments during installation, which simplifies the alignment process. This flexibility is particularly beneficial in applications where thermal expansion, shaft deflection, or other dynamic factors may cause misalignment during operation.

  • Load Distribution:

When misalignment occurs, self-aligning bearings distribute the load more evenly across the rolling elements and raceways. This even load distribution helps reduce localized stresses and minimizes the risk of premature failure. By accommodating misalignment, self-aligning bearings allow for smoother operation and improved reliability in machinery.

It’s important to note that while self-aligning bearings can compensate for certain degrees of misalignment, there are limits to their misalignment capability. Excessive misalignment beyond the bearing’s specified limits can lead to increased friction, reduced bearing life, and potential damage. Therefore, it is crucial to follow the manufacturer’s guidelines and recommendations regarding misalignment limits and operating conditions to ensure optimal performance and longevity of self-aligning bearings in machinery.

China Best Sales China Manufacturer Radial Thrust Self-Aligning Deep Groove Angular Contact Insert Ball Bearings Units Cylindrical Tapered Spherical Needle Roller Bearings   carrier bearingChina Best Sales China Manufacturer Radial Thrust Self-Aligning Deep Groove Angular Contact Insert Ball Bearings Units Cylindrical Tapered Spherical Needle Roller Bearings   carrier bearing
editor by CX 2024-04-09

China Good quality Double Row Self-Aligning Spherical Roller Bearings 22315 22316MB/W33 deep groove ball bearing

Product Description

NSKTimken CZPT CZPT CZPT Wheel Bearing Spherical Roller Bearing Taper Roller Bearing Cylindrical
Roller Bearing Deep Groove Ball Bearing

About Spherical Roller Bearing
1): CZPT to accommodate misalignment
2): Suitable for high axial and some radial loads
3): Relatively high speed ratings
4): Type: YM (CA, CAM, EAS ), YMB, MB, CJ(CC CD RH), E (E1)
5): Application examples: Heavy vertical shafts, injection moulding machines, etc. 

Bearing No. 

Dimensions (mm)

Basic load rating Limiting speed(r/min) Weight (kg)

Cylindrical Bore

Taper Bore

D

D

B

Rmin

Cr

Cor

Grease

Oil

22 Series

22208CC

22208CCK

40

80

23

1.1

77.0

88.5

5000

6300

0.524

22209CC

22209CCK

45

85

23

1.1

80.5

95.2

4500

6000

0.571

22210CC

22210CCK

50

90

23

1.1

83.8

102.0

4300

5300

0.614

22211CC

22211CCK

55

100

25

1.5

102.0

125.0

3800

5000

0.847

22212CC

22212CCK

60

110

28

1.5

122.0

155.0

3600

4500

1.150

22213CC

22213CCK

65

120

31

1.5

150.0

195.0

3200

4000

1.540

22214CC

22214CCK

70

125

31

1.5

150.0

195.0

3000

3800

1.600

22215CC

22215CCK

75

730

31

1.5

162.0

215.0

3000

3800

1.690

22216CC

22216CCK

80

140

33

2.0

175.0

235.0

2800

3400

2.130

22217CC

22217CCK

85

150

36

2.0

212…0

282.0

2600

3200

2.670

22218CC

22218CCK

90

160

40

2.0

250.0

338.0

2400

3000

3.380

23 Series 

 

22308CC

22308CCK

40

90

33

1.5

120.0

138.0

4500

6000

1.571

22309CC

22309CCK

45

100

36

1.5

142.0

170.0

4000

5300

1.370

22310CC

22310CCK

50

110

40

2.0

178.0

212.0

3800

4800

1.790

22311CC

22311CCK

55

120

43

2.0

210.0

252.0

3400

4300

2.310

22312CC

22312CCK

60

130

46

2.1

242.0

292.0

3200

4000

2.880

22313CC

22313CCK

65

140

48

2.1

265.0

320.0

3000

3800

3.470

22314CC

22314CCK

70

150

51

2.1

312.0

395.0

2800

3400

4.340

22315CC

22315CCK

75

160

55

2.1

348.0

448.0

2600

3200

5.280

Our packing: 
* Industrial pakage+outer carton+pallets
* sigle box+outer carton+pallets
* Tube package+middle box+outer carton+pallets
* According to your requirments

SAMPLES
1. Samples quantity: 1-10 PCS are available. 
2. Free samples: It depends on the Model No., material and quantity. Some of the bearings samples need client to pay samples charge and shipping cost. 
3. It’s better to start your order with Trade Assurance to get full protection for your samples order. 

CUSTOMIZED
The customized LOGO or drawing is acceptable for us. 

MOQ
1. MOQ: 10 PCS mix different standard bearings. 
2. MOQ: 3000 PCS customized your brand bearings. 

OEM POLICY
1. We can printing your brand (logo, artwork)on the shield or laser engraving your brand on the shield. 
2. We can custom your packaging according to your design
3. All copyright own by clients and we promised don’t disclose any info. 

SUPORT
Please visit our bearings website, we strongly encourge that you can communicate with us through email, thanks! 

We have all kinds of bearings, just tell me your item number and quantity, best price will be offered to you soon
The material of the bearings, precision rating, seals type, OEM service, etc, all of them we can make according to your requirement.

/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

OEM: Available
Feature: Cheap Price, High Speed, Long Life
Hardness: 59-63HRC
Samples:
US$ 10/Piece
1 Piece(Min.Order)

|

Order Sample

Customization:
Available

|

Customized Request

.shipping-cost-tm .tm-status-off{background: none;padding:0;color: #1470cc}

Shipping Cost:

Estimated freight per unit.







about shipping cost and estimated delivery time.
Payment Method:







 

Initial Payment



Full Payment
Currency: US$
Return&refunds: You can apply for a refund up to 30 days after receipt of the products.

self aligning bearing

Can you provide guidance on the selection and sizing of self-aligning bearings for specific applications?

Yes, here’s a detailed explanation on the selection and sizing of self-aligning bearings for specific applications:

  • Understand the Application Requirements:

The first step in selecting and sizing self-aligning bearings is to thoroughly understand the requirements of the application. Consider factors such as:

  • Load: Determine the magnitude and direction of the load the bearing will be subjected to, including static, dynamic, and shock loads.
  • Speed: Identify the rotational speed or frequency of operation to ensure the selected bearing can handle the required speed without compromising performance.
  • Environment: Consider the operating environment, including temperature range, presence of contaminants, moisture, or corrosive substances, and any other specific environmental factors that may affect the bearing’s performance.
  • Mounting and Space Constraints: Evaluate the available space for bearing installation and any specific mounting requirements or constraints within the application.
  • Service Life and Maintenance: Determine the desired service life and maintenance intervals to select a bearing that can meet these requirements.
  • Consult Bearing Manufacturer’s Catalogs and Technical Resources:

Once the application requirements are understood, consult the catalogs and technical resources provided by self-aligning bearing manufacturers. These resources contain valuable information such as bearing types, sizes, load ratings, and operating characteristics.

Identify the specific self-aligning bearing series or types that are suitable for the application based on the load capacity, speed capability, and other performance factors.

  • Consider Bearing Materials and Lubrication:

Pay attention to the bearing materials and lubrication requirements. Different bearing materials, such as steel, ceramic, or polymers, offer varying levels of performance in terms of load capacity, temperature resistance, and corrosion resistance.

Choose the appropriate bearing material that aligns with the application’s requirements. Additionally, consider the lubrication method and type of lubricant recommended for optimal bearing performance and longevity.

  • Factor in Safety and Reliability:

Ensure that the selected self-aligning bearing has an appropriate safety margin to handle the expected loads and operating conditions. It is advisable to consult with bearing experts or utilize engineering calculations to verify the bearing’s suitability and reliability.

  • Consider Application-Specific Features:

Depending on the application, there may be specific features or options to consider. For example, applications with high contamination levels may require sealed or shielded bearings to prevent debris ingress, while applications with high-speed requirements may benefit from bearings with optimized internal designs or cage materials.

  • Review Manufacturer Recommendations:

Finally, review the manufacturer’s recommendations for the selected self-aligning bearing in terms of installation guidelines, maintenance procedures, and any specific considerations for the application.

By following these guidelines and consulting with bearing manufacturers or experts when needed, you can make an informed selection and sizing of self-aligning bearings that meet the specific requirements of your application, ensuring reliable performance and longevity.

self aligning bearing

Can self-aligning bearings be customized or modified for unique industrial needs?

Yes, self-aligning bearings can be customized or modified to meet unique industrial needs. Here’s a detailed explanation:

  • Customized Designs:

Manufacturers of self-aligning bearings often offer customization options to accommodate specific industrial requirements. These customization options can include:

  • Size and Dimensions: Self-aligning bearings can be customized to different sizes and dimensions, allowing them to fit specific equipment or space constraints within an industrial setting.
  • Load Capacity: Manufacturers can modify self-aligning bearings to handle higher or lower load capacities based on the unique demands of an application. This can involve altering the bearing’s internal geometry, material selection, or heat treatment processes.
  • Operating Conditions: Customizations can be madeto enhance the performance of self-aligning bearings in specific operating conditions. For example, the bearing’s materials, lubrication, or sealing arrangements can be tailored to withstand extreme temperatures, corrosive environments, or high levels of contamination.
  • Mounting Configurations: Self-aligning bearings can be customized to meet specific mounting requirements. This may involve modifying the bearing’s outer ring, inner ring, or flange configurations to ensure proper fit and alignment within a particular industrial setup.
  • Sealing and Protection: Manufacturers can provide customized sealing arrangements to prevent the ingress of contaminants or protect the bearing from harsh external conditions. This can include adding specialized seals, shields, or coatings to enhance the bearing’s durability and longevity.
  • Lubrication: The lubrication requirements of self-aligning bearings can be customized based on the application’s specific needs. Manufacturers can offer different lubrication options, such as solid lubricants or specialized greases, to optimize performance and minimize maintenance requirements.
  • Collaboration with Manufacturers:

When unique industrial needs arise, it is advisable to collaborate closely with the bearing manufacturer or consult with bearing experts. They can provide technical expertise and guidance to assess the specific requirements and propose suitable customizations or modifications to the self-aligning bearings.

It is important to note that customization or modification of self-aligning bearings may involve additional costs and lead time for manufacturing. Therefore, a thorough evaluation of the application’s needs, cost-benefit analysis, and discussions with the manufacturer are essential to determine the feasibility and effectiveness of the customization process.

By leveraging the customization options offered by bearing manufacturers and working in collaboration with experts, self-aligning bearings can be tailored to meet the unique demands of various industries, ensuring optimal performance, reliability, and longevity in specific industrial applications.

self aligning bearing

How do self-aligning bearings differ from fixed or non-self-aligning bearings?

Self-aligning bearings differ from fixed or non-self-aligning bearings in several ways. Here’s a detailed explanation of the differences between these types of bearings:

  • Design and Construction:

The design and construction of self-aligning bearings are distinct from fixed or non-self-aligning bearings. Self-aligning bearings have a spherical outer ring raceway, which allows for misalignment compensation. In contrast, fixed or non-self-aligning bearings typically have a cylindrical or tapered outer ring raceway, designed for precise alignment between the shaft and the housing.

  • Misalignment Compensation:

The primary difference between self-aligning bearings and fixed or non-self-aligning bearings is their ability to compensate for misalignment. Self-aligning bearings can accommodate angular misalignment, axial misalignment, and shaft deflection, whereas fixed or non-self-aligning bearings have limited tolerance for misalignment and require precise alignment during installation.

  • Load Distribution:

Self-aligning bearings distribute the load more evenly across the rolling elements and raceways, thanks to their ability to accommodate misalignment. This helps reduce localized stresses and minimize the risk of premature failure. Fixed or non-self-aligning bearings, without the ability to compensate for misalignment, may experience uneven loading and increased stress on specific areas, leading to accelerated wear and potential failure.

  • Friction and Wear:

Due to their misalignment compensation capability, self-aligning bearings help reduce friction and wear. Misalignment in fixed or non-self-aligning bearings can cause increased friction and localized wear, leading to reduced bearing life. Self-aligning bearings distribute the load more evenly, minimizing friction and wear on the rolling elements and raceways, resulting in improved reliability and longevity.

  • Application Range:

The different design and misalignment compensation capability of self-aligning bearings make them suitable for a broader range of applications compared to fixed or non-self-aligning bearings. Self-aligning bearings are commonly used in applications where misalignment is expected, such as heavy machinery, conveyor systems, and mining equipment. Fixed or non-self-aligning bearings are typically employed in applications that require precise alignment, such as machine tools or high-precision equipment.

  • Installation and Maintenance:

Self-aligning bearings offer easier installation and maintenance compared to fixed or non-self-aligning bearings. The self-aligning capability of these bearings allows for more flexibility during the installation process, accommodating slight misalignments. In contrast, fixed or non-self-aligning bearings require careful alignment procedures to ensure proper functioning. Additionally, self-aligning bearings are often designed for easier maintenance, enabling tasks such as re-greasing or replacement without extensive disassembly.

In summary, self-aligning bearings differ from fixed or non-self-aligning bearings in their design, misalignment compensation capability, load distribution, friction and wear characteristics, application range, and ease of installation and maintenance. These differences make self-aligning bearings particularly suitable for applications where misalignment is expected or dynamic operating conditions are present.

China Good quality Double Row Self-Aligning Spherical Roller Bearings 22315 22316MB/W33   deep groove ball bearingChina Good quality Double Row Self-Aligning Spherical Roller Bearings 22315 22316MB/W33   deep groove ball bearing
editor by CX 2024-03-28