Mô tả
Key Specifications
| Parameter | Value | Parameter | Value |
|---|---|---|---|
| Part Number | EP-GEG110ES | Series / reference | Heavy-Duty Radial |
| Bore d (mm) | 110 | Outside diameter D (mm) | 180 |
| Width B (mm) | 100 | Inner-ring width C (mm) | 70 |
| Dk (mm) | 160 | R1s / R2s min | 1.0 / 1.0 mm |
| Articulation α | 11° | Dynamic load Cr | 950 kN |
| Static load C0r | 4750 kN | Weight | 1100 g |
| Lubrication | Relubrication required | Sealing | Open / unsealed |
| Sliding pair | Steel / steel | Surface / liner | Outer and inner rings phosphate treated |
Product Description
EP-GEG110ES construction and application notes
EP-GEG110ES is the 110 mm-bore model in the GEG..E / GEG..ES Heavy-Duty family. Its nominal envelope is d 110 mm × D 180 mm with B 100 mm overall width.
Heavy-duty GEG radial construction with a single axial split. Type ES uses lubricating grooves and holes in both rings. The 11° articulation value shown in the model table helps define angular movement around the spherical sliding surface. This construction is intended for slow oscillating or pivoting joints where a planned lubrication path is available. On EP-GEG110ES, that construction is paired with a 110 mm bore, 180 mm outside diameter, 100 mm overall width, 950 kN dynamic rating and 11° catalogue articulation value.
For EP-GEG110ES, the GEG heavy-duty family uses a wider radial section than the comparable GE range. Housing width and shoulder support therefore deserve extra attention when a machine needs the heavier GEG envelope but remains on a greaseable steel-on-steel system.
Installation and fit
For EP-GEG110ES, start the fit review from its 110 mm bore and 180 mm outside diameter, then check how the 100 mm bearing width is supported by the housing shoulders. The fitting-tolerance resource includes H7 and h6 among the reference classes; final fit still depends on ring loading, housing stiffness, temperature and the machine interface.
Selection Context
How to verify EP-GEG110ES in the joint
For EP-GEG110ES, the useful starting point for this row is the physical interface: pin diameter, housing bore and available axial space. Compare the complete envelope with the removed part; a matching bore by itself does not establish the correct housing fit. Temperature, contamination and articulation should be discussed together because they influence whether the selected construction is practical. If documentation is required, list the drawing, inspection or material records needed with the commercial enquiry.
Cross-Reference
Brand reference for EP-GEG110ES
Cross-reference designations help identify the family. They do not replace dimensional, suffix, sealing and application checks.
| Brand | Reference designation | Verification note |
|---|---|---|
| SKF | GEH110ES | Reference designation; verify dimensions and suffix. |
| FAG | GEH110ES | Reference designation; verify dimensions and suffix. |
| ELGES | GE110FO | Reference designation; verify dimensions and suffix. |
| IKO | GE110GS | Reference designation; verify dimensions and suffix. |
Technical Documents
Drawings and order documents
Related Products
Compare the same bore across other constructions
RFQ
Request a quote for EP-GEG110ES
For EP-GEG110ES, include quantity, application, operating environment and any drawing or document requirement. The enquiry area keeps this 110 × 180 × 100 mm model in context so the quotation can be tied to the exact product rather than only the family name.
Model: EP-GEG110ES
