Açıklama
Key Specifications
| Parameter | Value | Parameter | Value |
|---|---|---|---|
| Part Number | EP-GE15C | Series / reference | Maintenance-Free PTFE |
| Bore d (mm) | 15 | Outside diameter D (mm) | 26 |
| Width B (mm) | 12 | Inner-ring width C (mm) | 9 |
| Dk (mm) | 22 | d1 min (mm) | 18 |
| R1s / R2s min | 0.3 / 0.3 mm | Articulation α | 8° |
| Dynamic load Cr | 18 kN | Static load C0r | 45 kN |
| Weight | 27 g | Lubrication | Maintenance-free sliding system |
| Sealing | Open reference construction | Sliding pair | Steel / PTFE composite |
| Surface / liner | Chromium-plated spherical inner-ring surface |
Product Description
EP-GE15C construction and application notes
EP-GE15C is the 15 mm-bore model in the GE..C / GEG..C Maintenance-Free PTFE family. Its nominal envelope is d 15 mm × D 26 mm with B 12 mm overall width.
Outer ring pressed around the inner ring, with the outer race lined by PTFE composite material and a chromium-plated spherical inner-ring surface. The PTFE composite sliding layer removes routine relubrication from the bearing itself; load, oscillation, temperature and adjacent surface condition still control application suitability. On EP-GE15C, that construction is paired with a 15 mm bore, 26 mm outside diameter, 12 mm overall width, 18 kN dynamic rating and 8° catalogue articulation value.
For EP-GE15C, the C-family construction uses a PTFE-composite sliding layer instead of a routinely greased steel-on-steel contact. Selection should therefore focus on liner condition, motion, temperature and the surrounding surfaces as well as the basic boundary dimensions.
Installation and fit
For EP-GE15C, start the fit review from its 15 mm bore and 26 mm outside diameter, then check how the 12 mm bearing width is supported by the housing shoulders. The fitting-tolerance resource includes H7 and h6 among the reference classes; final fit still depends on ring loading, housing stiffness, temperature and the machine interface.
Selection Context
How to verify EP-GE15C in the joint
For EP-GE15C, the useful starting point for this row is the physical interface: pin diameter, housing bore and available axial space. Pay particular attention to the outside diameter and overall width because both must fit the existing housing without forcing the joint. Replacement planning should include the condition of the pin and housing, since wear outside the bearing can change the apparent fit. If a related sealed or maintenance-free version is being considered, explain what problem the alternative construction is intended to solve.
Cross-Reference
Brand reference for EP-GE15C
Cross-reference designations help identify the family. They do not replace dimensional, suffix, sealing and application checks.
| Brand | Reference designation | Verification note |
|---|---|---|
| SKF | GE15C | Reference designation; verify dimensions and suffix. |
| FAG | GE15C | Reference designation; verify dimensions and suffix. |
| ELGES | GE15UK | Reference designation; verify dimensions and suffix. |
| ASK | GE15-D | Reference designation; verify dimensions and suffix. |
| IKO | GE15EC | Reference designation; verify dimensions and suffix. |
| NTN | SAR1-15 | Reference designation; verify dimensions and suffix. |
Technical Documents
Drawings and order documents
Related Products
Compare the same bore across other constructions
RFQ
Request a quote for EP-GE15C
For EP-GE15C, include quantity, application, operating environment and any drawing or document requirement. The enquiry area keeps this 15 × 26 × 12 mm model in context so the quotation can be tied to the exact product rather than only the family name.
Model: EP-GE15C
