คำอธิบาย
Key Specifications
| Parameter | Value | Parameter | Value |
|---|---|---|---|
| Part Number | EP-GEG35ES 2RS | Series / reference | Heavy-Duty Sealed |
| Bore d (mm) | 35 | Outside diameter D (mm) | 62 |
| Width B (mm) | 35 | Inner-ring width C (mm) | 22 |
| Dk (mm) | 53 | R1s / R2s min | 0.6 / 1.0 mm |
| Articulation α | 16° | Dynamic load Cr | 100 kN |
| Static load C0r | 500 kN | Weight | 390 g |
| Lubrication | Relubrication required | Sealing | 2RS lip seals on both sides |
| Sliding pair | Steel / steel | Surface / liner | Outer and inner rings phosphate treated |
Product Description
EP-GEG35ES 2RS construction and application notes
EP-GEG35ES 2RS is the 35 mm-bore model in the GEG..ES 2RS Heavy-Duty Sealed family. Its nominal envelope is d 35 mm × D 62 mm with B 35 mm overall width.
Single-split heavy-duty GEG geometry, lubricating grooves and holes in both rings, plus 2RS lip seals on both faces. The 2RS seals help protect the bearing faces, but seal condition, grease access and the contamination path still need to be considered in the surrounding joint. On EP-GEG35ES-2RS, that construction is paired with a 35 mm bore, 62 mm outside diameter, 35 mm overall width, 100 kN dynamic rating and 16° catalogue articulation value.
For EP-GEG35ES-2RS, the sealed GEG family combines the wider heavy-duty radial geometry with lip seals on both faces. It is intended for exposed oscillating joints that justify the larger section while still retaining a planned grease route.
Installation and fit
For EP-GEG35ES-2RS, start the fit review from its 35 mm bore and 62 mm outside diameter, then check how the 35 mm bearing width is supported by the housing shoulders. The fitting-tolerance resource includes H7 and h6 among the reference classes; final fit still depends on ring loading, housing stiffness, temperature and the machine interface.
Selection Context
How to verify EP-GEG35ES-2RS in the joint
For EP-GEG35ES-2RS, this size is best reviewed from the actual pin and housing rather than from the designation alone. Check the shoulder geometry around the listed width and outside diameter, especially when the old bearing or housing shows wear. If the joint works outdoors, note the contamination path and adjacent surface condition rather than relying on a seal suffix alone. If documentation is required, list the drawing, inspection or material records needed with the commercial enquiry.
Cross-Reference
Brand reference for EP-GEG35ES 2RS
Cross-reference designations help identify the family. They do not replace dimensional, suffix, sealing and application checks.
| Brand | Reference designation | Verification note |
|---|---|---|
| SKF | GEH35ES 2RS | Reference designation; verify dimensions and suffix. |
| FAG | GEH35ES 2RS | Reference designation; verify dimensions and suffix. |
| ELGES | GE35FO 2RS | Reference designation; verify dimensions and suffix. |
| IKO | GE35GS 2RS | Reference designation; verify dimensions and suffix. |
Technical Documents
Drawings and order documents
Related Products
Compare the same bore across other constructions
RFQ
Request a quote for EP-GEG35ES 2RS
For EP-GEG35ES-2RS, include quantity, application, operating environment and any drawing or document requirement. The enquiry area keeps this 35 × 62 × 35 mm model in context so the quotation can be tied to the exact product rather than only the family name.
Model: EP-GEG35ES 2RS
