Description
Key Specifications
| Parameter | Value | Parameter | Value |
|---|---|---|---|
| Part Number | EP-GEG110ES 2RS | Series / reference | Heavy-Duty Sealed |
| Bore d (mm) | 110 | Outside diameter D (mm) | 180 |
| Width B (mm) | 100 | Inner-ring width C (mm) | 70 |
| Dk (mm) | 160 | R1s / R2s min | 1.0 / 1.0 mm |
| Articulation α | 11° | Dynamic load Cr | 950 kN |
| Static load C0r | 4750 kN | Weight | 1100 g |
| Lubrication | Relubrication required | Sealing | 2RS lip seals on both sides |
| Sliding pair | Steel / steel | Surface / liner | Outer and inner rings phosphate treated |
Product Description
EP-GEG110ES 2RS construction and application notes
EP-GEG110ES 2RS is the 110 mm-bore model in the GEG..ES 2RS Heavy-Duty Sealed family. Its nominal envelope is d 110 mm × D 180 mm with B 100 mm overall width.
Single-split heavy-duty GEG geometry, lubricating grooves and holes in both rings, plus 2RS lip seals on both faces. The 2RS seals help protect the bearing faces, but seal condition, grease access and the contamination path still need to be considered in the surrounding joint. On EP-GEG110ES-2RS, that construction is paired with a 110 mm bore, 180 mm outside diameter, 100 mm overall width, 950 kN dynamic rating and 11° catalogue articulation value.
For EP-GEG110ES-2RS, the sealed GEG family combines the wider heavy-duty radial geometry with lip seals on both faces. It is intended for exposed oscillating joints that justify the larger section while still retaining a planned grease route.
Installation and fit
For EP-GEG110ES-2RS, start the fit review from its 110 mm bore and 180 mm outside diameter, then check how the 100 mm bearing width is supported by the housing shoulders. The fitting-tolerance resource includes H7 and h6 among the reference classes; final fit still depends on ring loading, housing stiffness, temperature and the machine interface.
Selection Context
How to verify EP-GEG110ES-2RS in the joint
For EP-GEG110ES-2RS, before treating this model as a repeat order, compare the installed joint with the current dimensional row. The bore and outside diameter establish the radial envelope, while the listed width controls bracket and shoulder clearance. Include the oscillation pattern and maintenance interval; these details help distinguish a serviceable metallic pair from a lined alternative. Attach the drawing when possible and state which dimensions were measured from the old part versus taken from the machine specification.
Cross-Reference
Brand reference for EP-GEG110ES 2RS
Cross-reference designations help identify the family. They do not replace dimensional, suffix, sealing and application checks.
| Brand | Reference designation | Verification note |
|---|---|---|
| SKF | GEH110ES 2RS | Reference designation; verify dimensions and suffix. |
| FAG | GEH110ES 2RS | Reference designation; verify dimensions and suffix. |
| ELGES | GE110FO 2RS | Reference designation; verify dimensions and suffix. |
| IKO | GE110GS 2RS | Reference designation; verify dimensions and suffix. |
Technical Documents
Drawings and order documents
Related Products
Compare the same bore across other constructions
RFQ
Request a quote for EP-GEG110ES 2RS
For EP-GEG110ES-2RS, include quantity, application, operating environment and any drawing or document requirement. The enquiry area keeps this 110 × 180 × 100 mm model in context so the quotation can be tied to the exact product rather than only the family name.
Model: EP-GEG110ES 2RS
