Beskrivning
Key Specifications
| Parameter | Value | Parameter | Value |
|---|---|---|---|
| Part Number | EP-PB6 | Series / reference | Bronze-Lined |
| Bore d (mm) | 6 | Outside diameter D (mm) | 18 |
| Width B (mm) | 9 | Inner-ring width C (mm) | 6.75 |
| d1 min (mm) | 9.0 | R1s / R2s min | 0.3 / 0.3 mm |
| Articulation α | 13° | Dynamic load Cr | 4.3 kN |
| Static load C0r | 9.8 kN | Weight | 13 g |
| Lubrication | Relubrication required | Sealing | Open reference construction |
| Sliding pair | Steel / bronze | Surface / liner | Bronze liner in the outer race |
Product Description
EP-PB6 construction and application notes
EP-PB6 is the 6 mm-bore model in the PB Bronze-Lined family. Its nominal envelope is d 6 mm × D 18 mm with B 9 mm overall width.
Outer race lined with a bronze liner, with a lubricating groove and hole in the outer ring. The steel/bronze sliding pair is intended for lubricated pivoting service, with inspection of wear, lubrication path and adjacent pin condition remaining part of maintenance. On EP-PB6, that construction is paired with a 6 mm bore, 18 mm outside diameter, 9 mm overall width, 4.3 kN dynamic rating and 13° catalogue articulation value.
For EP-PB6, the PB family uses a bronze-lined sliding interface and a lubricated pivoting service strategy. Its construction should be compared with PTFE-lined and steel-on-steel alternatives by considering lubrication access, motion pattern and the available joint envelope.
Installation and fit
For EP-PB6, start the fit review from its 6 mm bore and 18 mm outside diameter, then check how the 9 mm bearing width is supported by the housing shoulders. The fitting-tolerance resource includes H7 and h6 among the reference classes; final fit still depends on ring loading, housing stiffness, temperature and the machine interface.
Selection Context
How to verify EP-PB6 in the joint
For EP-PB6, for a replacement check, begin with the joint envelope and then compare the full bearing marking. Pay particular attention to the outside diameter and overall width because both must fit the existing housing without forcing the joint. The service review should record motion amplitude, inspection access and the way grease or a maintenance-free liner is expected to work. Attach the drawing when possible and state which dimensions were measured from the old part versus taken from the machine specification.
Korsreferens
Brand reference for EP-PB6
Cross-reference designations help identify the family. They do not replace dimensional, suffix, sealing and application checks.
| Brand | Reference designation | Verification note |
|---|---|---|
| IKO | PB6 | Reference designation; verify dimensions and suffix. |
Technical Documents
Drawings and order documents
Related Products
Compare the same bore across other constructions
Anbudsförfrågan
Request a quote for EP-PB6
For EP-PB6, include quantity, application, operating environment and any drawing or document requirement. The enquiry area keeps this 6 × 18 × 9 mm model in context so the quotation can be tied to the exact product rather than only the family name.
Model: EP-PB6
