Описание
Key Specifications
| Parameter | Value | Parameter | Value |
|---|---|---|---|
| Part Number | EP-PB22 | Series / reference | Bronze-Lined |
| Bore d (mm) | 22 | Outside diameter D (mm) | 50 |
| Width B (mm) | 28 | Inner-ring width C (mm) | 20 |
| d1 min (mm) | 25.8 | R1s / R2s min | 0.3 / 0.6 mm |
| Articulation α | 15° | Dynamic load Cr | 38 kN |
| Static load C0r | 88 kN | Weight | 260 g |
| Lubrication | Relubrication required | Sealing | Open reference construction |
| Sliding pair | Steel / bronze | Surface / liner | Bronze liner in the outer race |
Product Description
EP-PB22 construction and application notes
EP-PB22 is the 22 mm-bore model in the PB Bronze-Lined family. Its nominal envelope is d 22 mm × D 50 mm with B 28 mm overall width.
Outer race lined with a bronze liner, with a lubricating groove and hole in the outer ring. The steel/bronze sliding pair is intended for lubricated pivoting service, with inspection of wear, lubrication path and adjacent pin condition remaining part of maintenance. On EP-PB22, that construction is paired with a 22 mm bore, 50 mm outside diameter, 28 mm overall width, 38 kN dynamic rating and 15° catalogue articulation value.
For EP-PB22, the PB family uses a bronze-lined sliding interface and a lubricated pivoting service strategy. Its construction should be compared with PTFE-lined and steel-on-steel alternatives by considering lubrication access, motion pattern and the available joint envelope.
Installation and fit
For EP-PB22, start the fit review from its 22 mm bore and 50 mm outside diameter, then check how the 28 mm bearing width is supported by the housing shoulders. The fitting-tolerance resource includes H7 and h6 among the reference classes; final fit still depends on ring loading, housing stiffness, temperature and the machine interface.
Selection Context
How to verify EP-PB22 in the joint
For EP-PB22, before treating this model as a repeat order, compare the installed joint with the current dimensional row. Use the bore to identify the pin size, then confirm the outer ring has adequate seating across the available housing width. Use the catalogue articulation value as a geometry reference and still verify the machine movement over its real operating cycle. For a cross-brand replacement, submit the competitor marking exactly as stamped and note any suffix that appears after the size.
Cross-Reference
Brand reference for EP-PB22
Cross-reference designations help identify the family. They do not replace dimensional, suffix, sealing and application checks.
| Brand | Reference designation | Verification note |
|---|---|---|
| IKO | PB22 | Reference designation; verify dimensions and suffix. |
Technical Documents
Drawings and order documents
Related Products
Compare the same bore across other constructions
RFQ
Request a quote for EP-PB22
For EP-PB22, include quantity, application, operating environment and any drawing or document requirement. The enquiry area keeps this 22 × 50 × 28 mm model in context so the quotation can be tied to the exact product rather than only the family name.
Model: EP-PB22
