Описание
Key Specifications
| Parameter | Value | Parameter | Value |
|---|---|---|---|
| Part Number | EP-GE15ES 2RS | Series / reference | Sealed Standard Radial |
| Bore d (mm) | 15 | Outside diameter D (mm) | 26 |
| Width B (mm) | 12 | Inner-ring width C (mm) | 9 |
| Dk (mm) | 22 | R1s / R2s min | 0.3 / 0.3 mm |
| Articulation α | 8° | Dynamic load Cr | 17 kN |
| Static load C0r | 85 kN | Weight | 25 g |
| Lubrication | Relubrication required | Sealing | 2RS lip seals on both sides |
| Sliding pair | Steel / steel | Surface / liner | Outer and inner rings phosphate treated |
Product Description
EP-GE15ES 2RS construction and application notes
EP-GE15ES 2RS is the 15 mm-bore model in the GE..ES 2RS Sealed family. Its nominal envelope is d 15 mm × D 26 mm with B 12 mm overall width.
Single-split GE radial construction with lubricating grooves and holes plus lip seals on both bearing faces. The 2RS seals help protect the bearing faces, but seal condition, grease access and the contamination path still need to be considered in the surrounding joint. On EP-GE15ES-2RS, that construction is paired with a 15 mm bore, 26 mm outside diameter, 12 mm overall width, 17 kN dynamic rating and 8° catalogue articulation value.
For EP-GE15ES-2RS, the GE 2RS family keeps the compact GE radial envelope but adds lip sealing at both bearing faces. It suits joints where contamination control matters while scheduled relubrication is still part of normal service.
Installation and fit
For EP-GE15ES-2RS, start the fit review from its 15 mm bore and 26 mm outside diameter, then check how the 12 mm bearing width is supported by the housing shoulders. The fitting-tolerance resource includes H7 and h6 among the reference classes; final fit still depends on ring loading, housing stiffness, temperature and the machine interface.
Selection Context
How to verify EP-GE15ES-2RS in the joint
For EP-GE15ES-2RS, this size is best reviewed from the actual pin and housing rather than from the designation alone. The bore and outside diameter establish the radial envelope, while the listed width controls bracket and shoulder clearance. Also confirm whether the machine has a dependable lubrication route and whether contamination can reach either bearing face. For quotation, send the complete marking together with a joint photo and the measured interface.
Cross-Reference
Brand reference for EP-GE15ES 2RS
Cross-reference designations help identify the family. They do not replace dimensional, suffix, sealing and application checks.
| Brand | Reference designation | Verification note |
|---|---|---|
| SKF | GE15ES 2RS | Reference designation; verify dimensions and suffix. |
| FAG | GE15ES 2RS | Reference designation; verify dimensions and suffix. |
| ELGES | GE15DO 2RS | Reference designation; verify dimensions and suffix. |
| ASK | GE152RS | Reference designation; verify dimensions and suffix. |
| IKO | GE15ES 2RS | Reference designation; verify dimensions and suffix. |
| NTN | SA1~..BSS family | Reference designation; verify dimensions and suffix. |
Technical Documents
Drawings and order documents
Related Products
Compare the same bore across other constructions
RFQ
Request a quote for EP-GE15ES 2RS
For EP-GE15ES-2RS, include quantity, application, operating environment and any drawing or document requirement. The enquiry area keeps this 15 × 26 × 12 mm model in context so the quotation can be tied to the exact product rather than only the family name.
Model: EP-GE15ES 2RS
