Description
Key Specifications
| Parameter | Value | Parameter | Value |
|---|---|---|---|
| Part Number | EP-GEG35ES | Series / reference | Heavy-Duty Radial |
| Bore d (mm) | 35 | Outside diameter D (mm) | 62 |
| Width B (mm) | 35 | Inner-ring width C (mm) | 22 |
| Dk (mm) | 53 | R1s / R2s min | 0.6 / 1.0 mm |
| Articulation α | 16° | Dynamic load Cr | 100 kN |
| Static load C0r | 500 kN | Weight | 390 g |
| Lubrication | Relubrication required | Sealing | Open / unsealed |
| Sliding pair | Steel / steel | Surface / liner | Outer and inner rings phosphate treated |
Product Description
EP-GEG35ES construction and application notes
EP-GEG35ES is the 35 mm-bore model in the GEG..E / GEG..ES Heavy-Duty family. Its nominal envelope is d 35 mm × D 62 mm with B 35 mm overall width.
Heavy-duty GEG radial construction with a single axial split. Type ES uses lubricating grooves and holes in both rings. The 16° articulation value shown in the model table helps define angular movement around the spherical sliding surface. This construction is intended for slow oscillating or pivoting joints where a planned lubrication path is available. On EP-GEG35ES, that construction is paired with a 35 mm bore, 62 mm outside diameter, 35 mm overall width, 100 kN dynamic rating and 16° catalogue articulation value.
For EP-GEG35ES, the GEG heavy-duty family uses a wider radial section than the comparable GE range. Housing width and shoulder support therefore deserve extra attention when a machine needs the heavier GEG envelope but remains on a greaseable steel-on-steel system.
Installation and fit
For EP-GEG35ES, start the fit review from its 35 mm bore and 62 mm outside diameter, then check how the 35 mm bearing width is supported by the housing shoulders. The fitting-tolerance resource includes H7 and h6 among the reference classes; final fit still depends on ring loading, housing stiffness, temperature and the machine interface.
Selection Context
How to verify EP-GEG35ES in the joint
For EP-GEG35ES, before treating this model as a repeat order, compare the installed joint with the current dimensional row. Use the bore to identify the pin size, then confirm the outer ring has adequate seating across the available housing width. Use the catalogue articulation value as a geometry reference and still verify the machine movement over its real operating cycle. For a cross-brand replacement, submit the competitor marking exactly as stamped and note any suffix that appears after the size.
Cross-Reference
Brand reference for EP-GEG35ES
Cross-reference designations help identify the family. They do not replace dimensional, suffix, sealing and application checks.
| Brand | Reference designation | Verification note |
|---|---|---|
| SKF | GEH35ES | Reference designation; verify dimensions and suffix. |
| FAG | GEH35ES | Reference designation; verify dimensions and suffix. |
| ELGES | GE35FO | Reference designation; verify dimensions and suffix. |
| IKO | GE35GS | Reference designation; verify dimensions and suffix. |
Technical Documents
Drawings and order documents
Related Products
Compare the same bore across other constructions
RFQ
Request a quote for EP-GEG35ES
For EP-GEG35ES, include quantity, application, operating environment and any drawing or document requirement. The enquiry area keeps this 35 × 62 × 35 mm model in context so the quotation can be tied to the exact product rather than only the family name.
Model: EP-GEG35ES
