Opis
Key Specifications
| Parameter | Value | Parameter | Value |
|---|---|---|---|
| Part Number | EP-GEG6E | Series / reference | Heavy-Duty Radial |
| Bore d (mm) | 6 | Outside diameter D (mm) | 16 |
| Width B (mm) | 9 | Inner-ring width C (mm) | 5 |
| Dk (mm) | 13 | R1s / R2s min | 0.3 / 0.3 mm |
| Articulation α | 21° | Dynamic load Cr | 5.5 kN |
| Static load C0r | 27.5 kN | Weight | 8 g |
| Lubrication | Relubrication required | Sealing | Open / unsealed |
| Sliding pair | Steel / steel | Surface / liner | Outer and inner rings phosphate treated |
Product Description
EP-GEG6E construction and application notes
EP-GEG6E is the 6 mm-bore model in the GEG..E / GEG..ES Heavy-Duty family. Its nominal envelope is d 6 mm × D 16 mm with B 9 mm overall width.
Heavy-duty GEG radial construction with a single axial split. Type ES uses lubricating grooves and holes in both rings. The 21° articulation value shown in the model table helps define angular movement around the spherical sliding surface. This construction is intended for slow oscillating or pivoting joints where a planned lubrication path is available. On EP-GEG6E, that construction is paired with a 6 mm bore, 16 mm outside diameter, 9 mm overall width, 5.5 kN dynamic rating and 21° catalogue articulation value.
For EP-GEG6E, the GEG heavy-duty family uses a wider radial section than the comparable GE range. Housing width and shoulder support therefore deserve extra attention when a machine needs the heavier GEG envelope but remains on a greaseable steel-on-steel system.
Installation and fit
For EP-GEG6E, start the fit review from its 6 mm bore and 16 mm outside diameter, then check how the 9 mm bearing width is supported by the housing shoulders. The fitting-tolerance resource includes H7 and h6 among the reference classes; final fit still depends on ring loading, housing stiffness, temperature and the machine interface.
Selection Context
How to verify EP-GEG6E in the joint
For EP-GEG6E, this size is best reviewed from the actual pin and housing rather than from the designation alone. The bore and outside diameter establish the radial envelope, while the listed width controls bracket and shoulder clearance. Also confirm whether the machine has a dependable lubrication route and whether contamination can reach either bearing face. For quotation, send the complete marking together with a joint photo and the measured interface.
Cross-Reference
Brand reference for EP-GEG6E
Cross-reference designations help identify the family. They do not replace dimensional, suffix, sealing and application checks.
| Brand | Reference designation | Verification note |
|---|---|---|
| SKF | GEH6E | Reference designation; verify dimensions and suffix. |
| FAG | GEH6E | Reference designation; verify dimensions and suffix. |
| ELGES | GE6FO | Reference designation; verify dimensions and suffix. |
| IKO | GE6G | Reference designation; verify dimensions and suffix. |
Technical Documents
Drawings and order documents
Related Products
Compare the same bore across other constructions
RFQ
Request a quote for EP-GEG6E
For EP-GEG6E, include quantity, application, operating environment and any drawing or document requirement. The enquiry area keeps this 6 × 16 × 9 mm model in context so the quotation can be tied to the exact product rather than only the family name.
Model: EP-GEG6E
