Description
Key Specifications
| Parameter | Value | Parameter | Value |
|---|---|---|---|
| Part Number | EP-GE140ES 2RS | Series / reference | Sealed Standard Radial |
| Bore d (mm) | 140 | Outside diameter D (mm) | 210 |
| Width B (mm) | 90 | Inner-ring width C (mm) | 70 |
| Dk (mm) | 180 | R1s / R2s min | 1.0 / 1.0 mm |
| Articulation α | 7° | Dynamic load Cr | 1080 kN |
| Static load C0r | 5400 kN | Weight | 11000 g |
| Lubrication | Relubrication required | Sealing | 2RS lip seals on both sides |
| Sliding pair | Steel / steel | Surface / liner | Outer and inner rings phosphate treated |
Product Description
EP-GE140ES 2RS construction and application notes
EP-GE140ES 2RS is the 140 mm-bore model in the GE..ES 2RS Sealed family. Its nominal envelope is d 140 mm × D 210 mm with B 90 mm overall width.
Single-split GE radial construction with lubricating grooves and holes plus lip seals on both bearing faces. The 2RS seals help protect the bearing faces, but seal condition, grease access and the contamination path still need to be considered in the surrounding joint. On EP-GE140ES-2RS, that construction is paired with a 140 mm bore, 210 mm outside diameter, 90 mm overall width, 1080 kN dynamic rating and 7° catalogue articulation value.
For EP-GE140ES-2RS, the GE 2RS family keeps the compact GE radial envelope but adds lip sealing at both bearing faces. It suits joints where contamination control matters while scheduled relubrication is still part of normal service.
Installation and fit
For EP-GE140ES-2RS, start the fit review from its 140 mm bore and 210 mm outside diameter, then check how the 90 mm bearing width is supported by the housing shoulders. The fitting-tolerance resource includes H7 and h6 among the reference classes; final fit still depends on ring loading, housing stiffness, temperature and the machine interface.
Selection Context
How to verify EP-GE140ES-2RS in the joint
For EP-GE140ES-2RS, when this model is shortlisted, use the machine drawing to confirm the surrounding shoulders before looking at alternatives. The dimensional check should cover bore, outside diameter and both width values so the bearing is supported as intended. For protected machinery, focus on motion and maintenance access; for exposed machinery, add sealing and contamination to the same review. For MRO replacement, send the removed bearing code, housing condition and pin measurement rather than only the nominal bore.
Cross-Reference
Brand reference for EP-GE140ES 2RS
Cross-reference designations help identify the family. They do not replace dimensional, suffix, sealing and application checks.
| Brand | Reference designation | Verification note |
|---|---|---|
| SKF | GE140ES 2RS | Reference designation; verify dimensions and suffix. |
| FAG | GE140ES 2RS | Reference designation; verify dimensions and suffix. |
| ELGES | GE140DO 2RS | Reference designation; verify dimensions and suffix. |
| ASK | GE1402RS | Reference designation; verify dimensions and suffix. |
| IKO | GE140ES 2RS | Reference designation; verify dimensions and suffix. |
| NTN | SA1~..BSS family | Reference designation; verify dimensions and suffix. |
Technical Documents
Drawings and order documents
Related Products
Compare the same bore across other constructions
RFQ
Request a quote for EP-GE140ES 2RS
For EP-GE140ES-2RS, include quantity, application, operating environment and any drawing or document requirement. The enquiry area keeps this 140 × 210 × 90 mm model in context so the quotation can be tied to the exact product rather than only the family name.
Model: EP-GE140ES 2RS
