설명
Key Specifications
| Parameter | Value | Parameter | Value |
|---|---|---|---|
| Part Number | EP-GEG17C | Series / reference | Maintenance-Free PTFE |
| Bore d (mm) | 17 | Outside diameter D (mm) | 35 |
| Width B (mm) | 20 | Inner-ring width C (mm) | 12 |
| Dk (mm) | 29 | d1 min (mm) | 21 |
| R1s / R2s min | 0.3 / 0.3 mm | Articulation α | 19° |
| Dynamic load Cr | 31 kN | Static load C0r | 78 kN |
| Weight | 83 g | Lubrication | Maintenance-free sliding system |
| Sealing | Open reference construction | Sliding pair | Steel / PTFE composite |
| Surface / liner | Chromium-plated spherical inner-ring surface |
Product Description
EP-GEG17C construction and application notes
EP-GEG17C is the 17 mm-bore model in the GE..C / GEG..C Maintenance-Free PTFE family. Its nominal envelope is d 17 mm × D 35 mm with B 20 mm overall width.
Outer ring pressed around the inner ring, with the outer race lined by PTFE composite material and a chromium-plated spherical inner-ring surface. The PTFE composite sliding layer removes routine relubrication from the bearing itself; load, oscillation, temperature and adjacent surface condition still control application suitability. On EP-GEG17C, that construction is paired with a 17 mm bore, 35 mm outside diameter, 20 mm overall width, 31 kN dynamic rating and 19° catalogue articulation value.
For EP-GEG17C, the C-family construction uses a PTFE-composite sliding layer instead of a routinely greased steel-on-steel contact. Selection should therefore focus on liner condition, motion, temperature and the surrounding surfaces as well as the basic boundary dimensions.
Installation and fit
For EP-GEG17C, start the fit review from its 17 mm bore and 35 mm outside diameter, then check how the 20 mm bearing width is supported by the housing shoulders. The fitting-tolerance resource includes H7 and h6 among the reference classes; final fit still depends on ring loading, housing stiffness, temperature and the machine interface.
Selection Context
How to verify EP-GEG17C in the joint
For EP-GEG17C, for a replacement check, begin with the joint envelope and then compare the full bearing marking. Compare the complete envelope with the removed part; a matching bore by itself does not establish the correct housing fit. Also confirm whether the machine has a dependable lubrication route and whether contamination can reach either bearing face. Where the pin is worn, provide the least-damaged measurement and note whether a new pin will be installed with the bearing.
Cross-Reference
Brand reference for EP-GEG17C
Cross-reference designations help identify the family. They do not replace dimensional, suffix, sealing and application checks.
| Brand | Reference designation | Verification note |
|---|---|---|
| SKF | GE17C | Reference designation; verify dimensions and suffix. |
| FAG | GE17C | Reference designation; verify dimensions and suffix. |
| ELGES | GE17UK | Reference designation; verify dimensions and suffix. |
| ASK | GE17-D | Reference designation; verify dimensions and suffix. |
| IKO | GE17EC | Reference designation; verify dimensions and suffix. |
| NTN | SAR1-17 | Reference designation; verify dimensions and suffix. |
Technical Documents
Drawings and order documents
Related Products
Compare the same bore across other constructions
RFQ
Request a quote for EP-GEG17C
For EP-GEG17C, include quantity, application, operating environment and any drawing or document requirement. The enquiry area keeps this 17 × 35 × 20 mm model in context so the quotation can be tied to the exact product rather than only the family name.
Model: EP-GEG17C
