설명
Key Specifications
| Parameter | Value | Parameter | Value |
|---|---|---|---|
| Part Number | EP-GEG100ES 2RS | Series / reference | Heavy-Duty Sealed |
| Bore d (mm) | 100 | Outside diameter D (mm) | 160 |
| Width B (mm) | 85 | Inner-ring width C (mm) | 55 |
| Dk (mm) | 140 | R1s / R2s min | 1.0 / 1.0 mm |
| Articulation α | 14° | Dynamic load Cr | 655 kN |
| Static load C0r | 3250 kN | Weight | 5900 g |
| Lubrication | Relubrication required | Sealing | 2RS lip seals on both sides |
| Sliding pair | Steel / steel | Surface / liner | Outer and inner rings phosphate treated |
Product Description
EP-GEG100ES 2RS construction and application notes
EP-GEG100ES 2RS is the 100 mm-bore model in the GEG..ES 2RS Heavy-Duty Sealed family. Its nominal envelope is d 100 mm × D 160 mm with B 85 mm overall width.
Single-split heavy-duty GEG geometry, lubricating grooves and holes in both rings, plus 2RS lip seals on both faces. The 2RS seals help protect the bearing faces, but seal condition, grease access and the contamination path still need to be considered in the surrounding joint. On EP-GEG100ES-2RS, that construction is paired with a 100 mm bore, 160 mm outside diameter, 85 mm overall width, 655 kN dynamic rating and 14° catalogue articulation value.
For EP-GEG100ES-2RS, the sealed GEG family combines the wider heavy-duty radial geometry with lip seals on both faces. It is intended for exposed oscillating joints that justify the larger section while still retaining a planned grease route.
Installation and fit
For EP-GEG100ES-2RS, start the fit review from its 100 mm bore and 160 mm outside diameter, then check how the 85 mm bearing width is supported by the housing shoulders. The fitting-tolerance resource includes H7 and h6 among the reference classes; final fit still depends on ring loading, housing stiffness, temperature and the machine interface.
Selection Context
How to verify EP-GEG100ES-2RS in the joint
For EP-GEG100ES-2RS, the useful starting point for this row is the physical interface: pin diameter, housing bore and available axial space. If the part is being measured from service, take several readings around the pin and housing before selecting the nominal envelope. Describe dust, water, wash-down or other exposure because the same dimensions can exist in constructions with different sealing strategies. For quotation, send the complete marking together with a joint photo and the measured interface.
Cross-Reference
Brand reference for EP-GEG100ES 2RS
Cross-reference designations help identify the family. They do not replace dimensional, suffix, sealing and application checks.
| Brand | Reference designation | Verification note |
|---|---|---|
| SKF | GEH100ES 2RS | Reference designation; verify dimensions and suffix. |
| FAG | GEH100ES 2RS | Reference designation; verify dimensions and suffix. |
| ELGES | GE100FO 2RS | Reference designation; verify dimensions and suffix. |
| IKO | GE100GS 2RS | Reference designation; verify dimensions and suffix. |
Technical Documents
Drawings and order documents
Related Products
Compare the same bore across other constructions
RFQ
Request a quote for EP-GEG100ES 2RS
For EP-GEG100ES-2RS, include quantity, application, operating environment and any drawing or document requirement. The enquiry area keeps this 100 × 160 × 85 mm model in context so the quotation can be tied to the exact product rather than only the family name.
Model: EP-GEG100ES 2RS
