Description
Key Specifications
| Parameter | Value | Parameter | Value |
|---|---|---|---|
| Part Number | EP-GEG50ES 2RS | Series / reference | Heavy-Duty Sealed |
| Bore d (mm) | 50 | Outside diameter D (mm) | 90 |
| Width B (mm) | 56 | Inner-ring width C (mm) | 36 |
| Dk (mm) | 80 | R1s / R2s min | 0.6 / 1.0 mm |
| Articulation α | 17° | Dynamic load Cr | 245 kN |
| Static load C0r | 1220 kN | Weight | 1400 g |
| Lubrication | Relubrication required | Sealing | 2RS lip seals on both sides |
| Sliding pair | Steel / steel | Surface / liner | Outer and inner rings phosphate treated |
Product Description
EP-GEG50ES 2RS construction and application notes
EP-GEG50ES 2RS is the 50 mm-bore model in the GEG..ES 2RS Heavy-Duty Sealed family. Its nominal envelope is d 50 mm × D 90 mm with B 56 mm overall width.
Single-split heavy-duty GEG geometry, lubricating grooves and holes in both rings, plus 2RS lip seals on both faces. The 2RS seals help protect the bearing faces, but seal condition, grease access and the contamination path still need to be considered in the surrounding joint. On EP-GEG50ES-2RS, that construction is paired with a 50 mm bore, 90 mm outside diameter, 56 mm overall width, 245 kN dynamic rating and 17° catalogue articulation value.
For EP-GEG50ES-2RS, the sealed GEG family combines the wider heavy-duty radial geometry with lip seals on both faces. It is intended for exposed oscillating joints that justify the larger section while still retaining a planned grease route.
Installation and fit
For EP-GEG50ES-2RS, start the fit review from its 50 mm bore and 90 mm outside diameter, then check how the 56 mm bearing width is supported by the housing shoulders. The fitting-tolerance resource includes H7 and h6 among the reference classes; final fit still depends on ring loading, housing stiffness, temperature and the machine interface.
Selection Context
How to verify EP-GEG50ES-2RS in the joint
For EP-GEG50ES-2RS, the useful starting point for this row is the physical interface: pin diameter, housing bore and available axial space. Pay particular attention to the outside diameter and overall width because both must fit the existing housing without forcing the joint. Replacement planning should include the condition of the pin and housing, since wear outside the bearing can change the apparent fit. If a related sealed or maintenance-free version is being considered, explain what problem the alternative construction is intended to solve.
Cross-Reference
Brand reference for EP-GEG50ES 2RS
Cross-reference designations help identify the family. They do not replace dimensional, suffix, sealing and application checks.
| Brand | Reference designation | Verification note |
|---|---|---|
| SKF | GEH50ES 2RS | Reference designation; verify dimensions and suffix. |
| FAG | GEH50ES 2RS | Reference designation; verify dimensions and suffix. |
| ELGES | GE50FO 2RS | Reference designation; verify dimensions and suffix. |
| IKO | GE50GS 2RS | Reference designation; verify dimensions and suffix. |
Technical Documents
Drawings and order documents
Related Products
Compare the same bore across other constructions
RFQ
Request a quote for EP-GEG50ES 2RS
For EP-GEG50ES-2RS, include quantity, application, operating environment and any drawing or document requirement. The enquiry area keeps this 50 × 90 × 56 mm model in context so the quotation can be tied to the exact product rather than only the family name.
Model: EP-GEG50ES 2RS
