Description
Key Specifications
| Parameter | Value | Parameter | Value |
|---|---|---|---|
| Part Number | EP-GEG120ES 2RS | Series / reference | Heavy-Duty Sealed |
| Bore d (mm) | 120 | Outside diameter D (mm) | 210 |
| Width B (mm) | 115 | Inner-ring width C (mm) | 70 |
| Dk (mm) | 180 | R1s / R2s min | 1.0 / 1.0 mm |
| Articulation α | 16° | Dynamic load Cr | 1080 kN |
| Static load C0r | 5400 kN | Weight | 1500 g |
| Lubrication | Relubrication required | Sealing | 2RS lip seals on both sides |
| Sliding pair | Steel / steel | Surface / liner | Outer and inner rings phosphate treated |
Product Description
EP-GEG120ES 2RS construction and application notes
EP-GEG120ES 2RS is the 120 mm-bore model in the GEG..ES 2RS Heavy-Duty Sealed family. Its nominal envelope is d 120 mm × D 210 mm with B 115 mm overall width.
Single-split heavy-duty GEG geometry, lubricating grooves and holes in both rings, plus 2RS lip seals on both faces. The 2RS seals help protect the bearing faces, but seal condition, grease access and the contamination path still need to be considered in the surrounding joint. On EP-GEG120ES-2RS, that construction is paired with a 120 mm bore, 210 mm outside diameter, 115 mm overall width, 1080 kN dynamic rating and 16° catalogue articulation value.
For EP-GEG120ES-2RS, the sealed GEG family combines the wider heavy-duty radial geometry with lip seals on both faces. It is intended for exposed oscillating joints that justify the larger section while still retaining a planned grease route.
Installation and fit
For EP-GEG120ES-2RS, start the fit review from its 120 mm bore and 210 mm outside diameter, then check how the 115 mm bearing width is supported by the housing shoulders. The fitting-tolerance resource includes H7 and h6 among the reference classes; final fit still depends on ring loading, housing stiffness, temperature and the machine interface.
Selection Context
How to verify EP-GEG120ES-2RS in the joint
For EP-GEG120ES-2RS, this size is best reviewed from the actual pin and housing rather than from the designation alone. Pay particular attention to the outside diameter and overall width because both must fit the existing housing without forcing the joint. Check how often the joint moves, how far it articulates and whether the installed bearing can actually be reached for maintenance. If the old code is incomplete, include clear photographs of both bearing faces and any readable suffixes.
Cross-Reference
Brand reference for EP-GEG120ES 2RS
Cross-reference designations help identify the family. They do not replace dimensional, suffix, sealing and application checks.
| Brand | Reference designation | Verification note |
|---|---|---|
| SKF | GEH120ES 2RS | Reference designation; verify dimensions and suffix. |
| FAG | GEH120ES 2RS | Reference designation; verify dimensions and suffix. |
| ELGES | GE120FO 2RS | Reference designation; verify dimensions and suffix. |
| IKO | GE120GS 2RS | Reference designation; verify dimensions and suffix. |
Technical Documents
Drawings and order documents
Related Products
Compare the same bore across other constructions
RFQ
Request a quote for EP-GEG120ES 2RS
For EP-GEG120ES-2RS, include quantity, application, operating environment and any drawing or document requirement. The enquiry area keeps this 120 × 210 × 115 mm model in context so the quotation can be tied to the exact product rather than only the family name.
Model: EP-GEG120ES 2RS
