説明
Key Specifications
| Parameter | Value | Parameter | Value |
|---|---|---|---|
| Part Number | EP-GE100ES | Series / reference | Standard Radial |
| Bore d (mm) | 100 | Outside diameter D (mm) | 150 |
| Width B (mm) | 70 | Inner-ring width C (mm) | 55 |
| Dk (mm) | 130 | R1s / R2s min | 1.0 / 1.0 mm |
| Articulation α | 7° | Dynamic load Cr | 610 kN |
| Static load C0r | 3050 kN | Weight | 4300 g |
| Lubrication | Relubrication required | Sealing | Open / unsealed |
| Sliding pair | Steel / steel | Surface / liner | Outer and inner rings phosphate treated |
Product Description
EP-GE100ES construction and application notes
EP-GE100ES is the 100 mm-bore model in the GE..E / GE..ES Standard Radial family. Its nominal envelope is d 100 mm × D 150 mm with B 70 mm overall width.
Outer ring with a single split in the axial direction. Type ES uses lubricating grooves and holes in the outer and inner rings. The 7° articulation value shown in the model table helps define angular movement around the spherical sliding surface. This construction is intended for slow oscillating or pivoting joints where a planned lubrication path is available. On EP-GE100ES, that construction is paired with a 100 mm bore, 150 mm outside diameter, 70 mm overall width, 610 kN dynamic rating and 7° catalogue articulation value.
For EP-GE100ES, the GE standard family uses the compact radial envelope and a serviceable steel-on-steel sliding pair. It is most relevant where periodic relubrication is already part of the machine maintenance plan and an open bearing face is acceptable.
Installation and fit
For EP-GE100ES, start the fit review from its 100 mm bore and 150 mm outside diameter, then check how the 70 mm bearing width is supported by the housing shoulders. The fitting-tolerance resource includes H7 and h6 among the reference classes; final fit still depends on ring loading, housing stiffness, temperature and the machine interface.
Selection Context
How to verify EP-GE100ES in the joint
For EP-GE100ES, the useful starting point for this row is the physical interface: pin diameter, housing bore and available axial space. Compare the complete envelope with the removed part; a matching bore by itself does not establish the correct housing fit. Temperature, contamination and articulation should be discussed together because they influence whether the selected construction is practical. If documentation is required, list the drawing, inspection or material records needed with the commercial enquiry.
相互参照
Brand reference for EP-GE100ES
Cross-reference designations help identify the family. They do not replace dimensional, suffix, sealing and application checks.
| Brand | Reference designation | Verification note |
|---|---|---|
| SKF | GE100ES | Reference designation; verify dimensions and suffix. |
| FAG | GE100ES | Reference designation; verify dimensions and suffix. |
| ELGES | GE100DO | Reference designation; verify dimensions and suffix. |
| ASK | GE100 | Reference designation; verify dimensions and suffix. |
| IKO | GE100ES | Reference designation; verify dimensions and suffix. |
| NTN | SA1~..B family | Reference designation; verify dimensions and suffix. |
Technical Documents
Drawings and order documents
Related Products
Compare the same bore across other constructions
見積依頼書
Request a quote for EP-GE100ES
For EP-GE100ES, include quantity, application, operating environment and any drawing or document requirement. The enquiry area keeps this 100 × 150 × 70 mm model in context so the quotation can be tied to the exact product rather than only the family name.
Model: EP-GE100ES
