Description
Key Specifications
| Parameter | Value | Parameter | Value |
|---|---|---|---|
| Part Number | EP-GE80ET 2RS | Series / reference | Maintenance-Free Fabric |
| Bore d (mm) | 80 | Outside diameter D (mm) | 120 |
| Width B (mm) | 55 | Inner-ring width C (mm) | 45 |
| Dk (mm) | 92 | d1 min (mm) | 88 |
| R1s / R2s min | 1.0 / 1.0 mm | Articulation α | 6° |
| Dynamic load Cr | 567 kN | Static load C0r | 1140 kN |
| Weight | 2310 g | Lubrication | Maintenance-free sliding system |
| Sealing | 2RS lip seals on both sides | Sliding pair | Steel / PTFE fabric |
| Surface / liner | Chromium-plated inner-ring sphere; phosphate-treated outer ring |
Product Description
EP-GE80ET 2RS construction and application notes
EP-GE80ET 2RS is the 80 mm-bore model in the GE..ET 2RS Maintenance-Free Fabric family. Its nominal envelope is d 80 mm × D 120 mm with B 55 mm overall width.
Outer ring with a single axial split, PTFE fabric lining, lip seals on both sides and a chromium-plated spherical inner-ring surface. The maintenance-free liner and two-side seals suit slow oscillation and hard-to-service joints, while the machine designer still needs to verify temperature, contamination and motion amplitude. On EP-GE80ET-2RS, that construction is paired with a 80 mm bore, 120 mm outside diameter, 55 mm overall width, 567 kN dynamic rating and 6° catalogue articulation value.
For EP-GE80ET-2RS, the ET 2RS family combines a PTFE-fabric maintenance-free sliding layer with seals at both faces. It is a different service strategy from greaseable 2RS bearings, so maintenance access, contamination and liner suitability should be reviewed together.
Installation and fit
For EP-GE80ET-2RS, start the fit review from its 80 mm bore and 120 mm outside diameter, then check how the 55 mm bearing width is supported by the housing shoulders. The fitting-tolerance resource includes H7 and h6 among the reference classes; final fit still depends on ring loading, housing stiffness, temperature and the machine interface.
Selection Context
How to verify EP-GE80ET-2RS in the joint
For EP-GE80ET-2RS, for a replacement check, begin with the joint envelope and then compare the full bearing marking. Compare the complete envelope with the removed part; a matching bore by itself does not establish the correct housing fit. Also confirm whether the machine has a dependable lubrication route and whether contamination can reach either bearing face. Where the pin is worn, provide the least-damaged measurement and note whether a new pin will be installed with the bearing.
Cross-Reference
Brand reference for EP-GE80ET 2RS
Cross-reference designations help identify the family. They do not replace dimensional, suffix, sealing and application checks.
| Brand | Reference designation | Verification note |
|---|---|---|
| SKF | GE80TE 2TS | Reference designation; verify dimensions and suffix. |
| FAG | GE80UA 2RS | Reference designation; verify dimensions and suffix. |
| ELGES | GE80UK 2RS | Reference designation; verify dimensions and suffix. |
| ASK | GE80D 2RS | Reference designation; verify dimensions and suffix. |
Technical Documents
Drawings and order documents
Related Products
Compare the same bore across other constructions
RFQ
Request a quote for EP-GE80ET 2RS
For EP-GE80ET-2RS, include quantity, application, operating environment and any drawing or document requirement. The enquiry area keeps this 80 × 120 × 55 mm model in context so the quotation can be tied to the exact product rather than only the family name.
Model: EP-GE80ET 2RS
