Description
Key Specifications
| Parameter | Value | Parameter | Value |
|---|---|---|---|
| Part Number | EP-GE17ES 2RS | Series / reference | Sealed Standard Radial |
| Bore d (mm) | 17 | Outside diameter D (mm) | 30 |
| Width B (mm) | 14 | Inner-ring width C (mm) | 10 |
| Dk (mm) | 25 | R1s / R2s min | 0.3 / 0.3 mm |
| Articulation α | 10° | Dynamic load Cr | 21.2 kN |
| Static load C0r | 106 kN | Weight | 41 g |
| Lubrication | Relubrication required | Sealing | 2RS lip seals on both sides |
| Sliding pair | Steel / steel | Surface / liner | Outer and inner rings phosphate treated |
Product Description
EP-GE17ES 2RS construction and application notes
EP-GE17ES 2RS is the 17 mm-bore model in the GE..ES 2RS Sealed family. Its nominal envelope is d 17 mm × D 30 mm with B 14 mm overall width.
Single-split GE radial construction with lubricating grooves and holes plus lip seals on both bearing faces. The 2RS seals help protect the bearing faces, but seal condition, grease access and the contamination path still need to be considered in the surrounding joint. On EP-GE17ES-2RS, that construction is paired with a 17 mm bore, 30 mm outside diameter, 14 mm overall width, 21.2 kN dynamic rating and 10° catalogue articulation value.
For EP-GE17ES-2RS, the GE 2RS family keeps the compact GE radial envelope but adds lip sealing at both bearing faces. It suits joints where contamination control matters while scheduled relubrication is still part of normal service.
Installation and fit
For EP-GE17ES-2RS, start the fit review from its 17 mm bore and 30 mm outside diameter, then check how the 14 mm bearing width is supported by the housing shoulders. The fitting-tolerance resource includes H7 and h6 among the reference classes; final fit still depends on ring loading, housing stiffness, temperature and the machine interface.
Selection Context
How to verify EP-GE17ES-2RS in the joint
For EP-GE17ES-2RS, when this model is shortlisted, use the machine drawing to confirm the surrounding shoulders before looking at alternatives. Use the bore to identify the pin size, then confirm the outer ring has adequate seating across the available housing width. Describe dust, water, wash-down or other exposure because the same dimensions can exist in constructions with different sealing strategies. If the old code is incomplete, include clear photographs of both bearing faces and any readable suffixes.
Cross-Reference
Brand reference for EP-GE17ES 2RS
Cross-reference designations help identify the family. They do not replace dimensional, suffix, sealing and application checks.
| Brand | Reference designation | Verification note |
|---|---|---|
| SKF | GE17ES 2RS | Reference designation; verify dimensions and suffix. |
| FAG | GE17ES 2RS | Reference designation; verify dimensions and suffix. |
| ELGES | GE17DO 2RS | Reference designation; verify dimensions and suffix. |
| ASK | GE172RS | Reference designation; verify dimensions and suffix. |
| IKO | GE17ES 2RS | Reference designation; verify dimensions and suffix. |
| NTN | SA1~..BSS family | Reference designation; verify dimensions and suffix. |
Technical Documents
Drawings and order documents
Related Products
Compare the same bore across other constructions
RFQ
Request a quote for EP-GE17ES 2RS
For EP-GE17ES-2RS, include quantity, application, operating environment and any drawing or document requirement. The enquiry area keeps this 17 × 30 × 14 mm model in context so the quotation can be tied to the exact product rather than only the family name.
Model: EP-GE17ES 2RS
