Description
Key Specifications
| Parameter | Value | Parameter | Value |
|---|---|---|---|
| Part Number | EP-GE16ES | Series / reference | Standard Radial |
| Bore d (mm) | 16 | Outside diameter D (mm) | 30 |
| Width B (mm) | 14 | Inner-ring width C (mm) | 10 |
| Dk (mm) | 25 | R1s / R2s min | 0.3 / 0.3 mm |
| Articulation α | 10° | Dynamic load Cr | 21.2 kN |
| Static load C0r | 106 kN | Weight | 41 g |
| Lubrication | Relubrication required | Sealing | Open / unsealed |
| Sliding pair | Steel / steel | Surface / liner | Outer and inner rings phosphate treated |
Product Description
EP-GE16ES construction and application notes
EP-GE16ES is the 16 mm-bore model in the GE..E / GE..ES Standard Radial family. Its nominal envelope is d 16 mm × D 30 mm with B 14 mm overall width.
Outer ring with a single split in the axial direction. Type ES uses lubricating grooves and holes in the outer and inner rings. The 10° articulation value shown in the model table helps define angular movement around the spherical sliding surface. This construction is intended for slow oscillating or pivoting joints where a planned lubrication path is available. On EP-GE16ES, that construction is paired with a 16 mm bore, 30 mm outside diameter, 14 mm overall width, 21.2 kN dynamic rating and 10° catalogue articulation value.
For EP-GE16ES, the GE standard family uses the compact radial envelope and a serviceable steel-on-steel sliding pair. It is most relevant where periodic relubrication is already part of the machine maintenance plan and an open bearing face is acceptable.
Installation and fit
For EP-GE16ES, start the fit review from its 16 mm bore and 30 mm outside diameter, then check how the 14 mm bearing width is supported by the housing shoulders. The fitting-tolerance resource includes H7 and h6 among the reference classes; final fit still depends on ring loading, housing stiffness, temperature and the machine interface.
Selection Context
How to verify EP-GE16ES in the joint
For EP-GE16ES, this size is best reviewed from the actual pin and housing rather than from the designation alone. Check the shoulder geometry around the listed width and outside diameter, especially when the old bearing or housing shows wear. If the joint works outdoors, note the contamination path and adjacent surface condition rather than relying on a seal suffix alone. If documentation is required, list the drawing, inspection or material records needed with the commercial enquiry.
Cross-Reference
Brand reference for EP-GE16ES
Cross-reference designations help identify the family. They do not replace dimensional, suffix, sealing and application checks.
| Brand | Reference designation | Verification note |
|---|---|---|
| SKF | GE16ES | Reference designation; verify dimensions and suffix. |
| FAG | GE16ES | Reference designation; verify dimensions and suffix. |
| ELGES | GE16DO | Reference designation; verify dimensions and suffix. |
| ASK | GE16 | Reference designation; verify dimensions and suffix. |
| IKO | GE16ES | Reference designation; verify dimensions and suffix. |
| NTN | SA1~..B family | Reference designation; verify dimensions and suffix. |
Technical Documents
Drawings and order documents
Related Products
Compare the same bore across other constructions
RFQ
Request a quote for EP-GE16ES
For EP-GE16ES, include quantity, application, operating environment and any drawing or document requirement. The enquiry area keeps this 16 × 30 × 14 mm model in context so the quotation can be tied to the exact product rather than only the family name.
Model: EP-GE16ES
