Description
Key Specifications
| Parameter | Value | Parameter | Value |
|---|---|---|---|
| Part Number | EP-GEG30C | Series / reference | Maintenance-Free PTFE |
| Bore d (mm) | 30 | Outside diameter D (mm) | 55 |
| Width B (mm) | 32 | Inner-ring width C (mm) | 20 |
| Dk (mm) | 47 | d1 min (mm) | 34 |
| R1s / R2s min | 0.6 / 0.6 mm | Articulation α | 17° |
| Dynamic load Cr | 83 kN | Static load C0r | 212 kN |
| Weight | 304 g | Lubrication | Maintenance-free sliding system |
| Sealing | Open reference construction | Sliding pair | Steel / PTFE composite |
| Surface / liner | Chromium-plated spherical inner-ring surface |
Product Description
EP-GEG30C construction and application notes
EP-GEG30C is the 30 mm-bore model in the GE..C / GEG..C Maintenance-Free PTFE family. Its nominal envelope is d 30 mm × D 55 mm with B 32 mm overall width.
Outer ring pressed around the inner ring, with the outer race lined by PTFE composite material and a chromium-plated spherical inner-ring surface. The PTFE composite sliding layer removes routine relubrication from the bearing itself; load, oscillation, temperature and adjacent surface condition still control application suitability. On EP-GEG30C, that construction is paired with a 30 mm bore, 55 mm outside diameter, 32 mm overall width, 83 kN dynamic rating and 17° catalogue articulation value.
For EP-GEG30C, the C-family construction uses a PTFE-composite sliding layer instead of a routinely greased steel-on-steel contact. Selection should therefore focus on liner condition, motion, temperature and the surrounding surfaces as well as the basic boundary dimensions.
Installation and fit
For EP-GEG30C, start the fit review from its 30 mm bore and 55 mm outside diameter, then check how the 32 mm bearing width is supported by the housing shoulders. The fitting-tolerance resource includes H7 and h6 among the reference classes; final fit still depends on ring loading, housing stiffness, temperature and the machine interface.
Selection Context
How to verify EP-GEG30C in the joint
For EP-GEG30C, when this model is shortlisted, use the machine drawing to confirm the surrounding shoulders before looking at alternatives. The dimensional check should cover bore, outside diameter and both width values so the bearing is supported as intended. For protected machinery, focus on motion and maintenance access; for exposed machinery, add sealing and contamination to the same review. For MRO replacement, send the removed bearing code, housing condition and pin measurement rather than only the nominal bore.
Références croisées
Brand reference for EP-GEG30C
Cross-reference designations help identify the family. They do not replace dimensional, suffix, sealing and application checks.
| Brand | Reference designation | Verification note |
|---|---|---|
| SKF | GE30C | Reference designation; verify dimensions and suffix. |
| FAG | GE30C | Reference designation; verify dimensions and suffix. |
| ELGES | GE30UK | Reference designation; verify dimensions and suffix. |
| ASK | GE30-D | Reference designation; verify dimensions and suffix. |
| IKO | GE30EC | Reference designation; verify dimensions and suffix. |
| NTN | SAR1-30 | Reference designation; verify dimensions and suffix. |
Technical Documents
Drawings and order documents
Related Products
Compare the same bore across other constructions
Demande de devis
Request a quote for EP-GEG30C
For EP-GEG30C, include quantity, application, operating environment and any drawing or document requirement. The enquiry area keeps this 30 × 55 × 32 mm model in context so the quotation can be tied to the exact product rather than only the family name.
Model: EP-GEG30C
