توضیحات
Key Specifications
| Parameter | Value | Parameter | Value |
|---|---|---|---|
| Part Number | EP-GEG80ES 2RS | Series / reference | Heavy-Duty Sealed |
| Bore d (mm) | 80 | Outside diameter D (mm) | 130 |
| Width B (mm) | 75 | Inner-ring width C (mm) | 50 |
| Dk (mm) | 115 | R1s / R2s min | 1.0 / 1.0 mm |
| Articulation α | 14° | Dynamic load Cr | 490 kN |
| Static load C0r | 2450 kN | Weight | 3500 g |
| Lubrication | Relubrication required | Sealing | 2RS lip seals on both sides |
| Sliding pair | Steel / steel | Surface / liner | Outer and inner rings phosphate treated |
Product Description
EP-GEG80ES 2RS construction and application notes
EP-GEG80ES 2RS is the 80 mm-bore model in the GEG..ES 2RS Heavy-Duty Sealed family. Its nominal envelope is d 80 mm × D 130 mm with B 75 mm overall width.
Single-split heavy-duty GEG geometry, lubricating grooves and holes in both rings, plus 2RS lip seals on both faces. The 2RS seals help protect the bearing faces, but seal condition, grease access and the contamination path still need to be considered in the surrounding joint. On EP-GEG80ES-2RS, that construction is paired with a 80 mm bore, 130 mm outside diameter, 75 mm overall width, 490 kN dynamic rating and 14° catalogue articulation value.
For EP-GEG80ES-2RS, the sealed GEG family combines the wider heavy-duty radial geometry with lip seals on both faces. It is intended for exposed oscillating joints that justify the larger section while still retaining a planned grease route.
Installation and fit
For EP-GEG80ES-2RS, start the fit review from its 80 mm bore and 130 mm outside diameter, then check how the 75 mm bearing width is supported by the housing shoulders. The fitting-tolerance resource includes H7 and h6 among the reference classes; final fit still depends on ring loading, housing stiffness, temperature and the machine interface.
Selection Context
How to verify EP-GEG80ES-2RS in the joint
For EP-GEG80ES-2RS, for a replacement check, begin with the joint envelope and then compare the full bearing marking. Compare the complete envelope with the removed part; a matching bore by itself does not establish the correct housing fit. Also confirm whether the machine has a dependable lubrication route and whether contamination can reach either bearing face. Where the pin is worn, provide the least-damaged measurement and note whether a new pin will be installed with the bearing.
Cross-Reference
Brand reference for EP-GEG80ES 2RS
Cross-reference designations help identify the family. They do not replace dimensional, suffix, sealing and application checks.
| Brand | Reference designation | Verification note |
|---|---|---|
| SKF | GEH80ES 2RS | Reference designation; verify dimensions and suffix. |
| FAG | GEH80ES 2RS | Reference designation; verify dimensions and suffix. |
| ELGES | GE80FO 2RS | Reference designation; verify dimensions and suffix. |
| IKO | GE80GS 2RS | Reference designation; verify dimensions and suffix. |
Technical Documents
Drawings and order documents
Related Products
Compare the same bore across other constructions
RFQ
Request a quote for EP-GEG80ES 2RS
For EP-GEG80ES-2RS, include quantity, application, operating environment and any drawing or document requirement. The enquiry area keeps this 80 × 130 × 75 mm model in context so the quotation can be tied to the exact product rather than only the family name.
Model: EP-GEG80ES 2RS
