توضیحات
Key Specifications
| Parameter | Value | Parameter | Value |
|---|---|---|---|
| Part Number | EP-GEG60ES 2RS | Series / reference | Heavy-Duty Sealed |
| Bore d (mm) | 60 | Outside diameter D (mm) | 105 |
| Width B (mm) | 63 | Inner-ring width C (mm) | 40 |
| Dk (mm) | 92 | R1s / R2s min | 1.0 / 1.0 mm |
| Articulation α | 17° | Dynamic load Cr | 315 kN |
| Static load C0r | 1560 kN | Weight | 2000 g |
| Lubrication | Relubrication required | Sealing | 2RS lip seals on both sides |
| Sliding pair | Steel / steel | Surface / liner | Outer and inner rings phosphate treated |
Product Description
EP-GEG60ES 2RS construction and application notes
EP-GEG60ES 2RS is the 60 mm-bore model in the GEG..ES 2RS Heavy-Duty Sealed family. Its nominal envelope is d 60 mm × D 105 mm with B 63 mm overall width.
Single-split heavy-duty GEG geometry, lubricating grooves and holes in both rings, plus 2RS lip seals on both faces. The 2RS seals help protect the bearing faces, but seal condition, grease access and the contamination path still need to be considered in the surrounding joint. On EP-GEG60ES-2RS, that construction is paired with a 60 mm bore, 105 mm outside diameter, 63 mm overall width, 315 kN dynamic rating and 17° catalogue articulation value.
For EP-GEG60ES-2RS, the sealed GEG family combines the wider heavy-duty radial geometry with lip seals on both faces. It is intended for exposed oscillating joints that justify the larger section while still retaining a planned grease route.
Installation and fit
For EP-GEG60ES-2RS, start the fit review from its 60 mm bore and 105 mm outside diameter, then check how the 63 mm bearing width is supported by the housing shoulders. The fitting-tolerance resource includes H7 and h6 among the reference classes; final fit still depends on ring loading, housing stiffness, temperature and the machine interface.
Selection Context
How to verify EP-GEG60ES-2RS in the joint
For EP-GEG60ES-2RS, before treating this model as a repeat order, compare the installed joint with the current dimensional row. Use the bore to identify the pin size, then confirm the outer ring has adequate seating across the available housing width. Use the catalogue articulation value as a geometry reference and still verify the machine movement over its real operating cycle. For a cross-brand replacement, submit the competitor marking exactly as stamped and note any suffix that appears after the size.
Cross-Reference
Brand reference for EP-GEG60ES 2RS
Cross-reference designations help identify the family. They do not replace dimensional, suffix, sealing and application checks.
| Brand | Reference designation | Verification note |
|---|---|---|
| SKF | GEH60ES 2RS | Reference designation; verify dimensions and suffix. |
| FAG | GEH60ES 2RS | Reference designation; verify dimensions and suffix. |
| ELGES | GE60FO 2RS | Reference designation; verify dimensions and suffix. |
| IKO | GE60GS 2RS | Reference designation; verify dimensions and suffix. |
Technical Documents
Drawings and order documents
Related Products
Compare the same bore across other constructions
RFQ
Request a quote for EP-GEG60ES 2RS
For EP-GEG60ES-2RS, include quantity, application, operating environment and any drawing or document requirement. The enquiry area keeps this 60 × 105 × 63 mm model in context so the quotation can be tied to the exact product rather than only the family name.
Model: EP-GEG60ES 2RS
