توضیحات
Key Specifications
| Parameter | Value | Parameter | Value |
|---|---|---|---|
| Part Number | EP-GEG15ES | Series / reference | Heavy-Duty Radial |
| Bore d (mm) | 15 | Outside diameter D (mm) | 30 |
| Width B (mm) | 16 | Inner-ring width C (mm) | 10 |
| Dk (mm) | 25 | R1s / R2s min | 0.3 / 0.3 mm |
| Articulation α | 16° | Dynamic load Cr | 21.2 kN |
| Static load C0r | 106 kN | Weight | 46 g |
| Lubrication | Relubrication required | Sealing | Open / unsealed |
| Sliding pair | Steel / steel | Surface / liner | Outer and inner rings phosphate treated |
Product Description
EP-GEG15ES construction and application notes
EP-GEG15ES is the 15 mm-bore model in the GEG..E / GEG..ES Heavy-Duty family. Its nominal envelope is d 15 mm × D 30 mm with B 16 mm overall width.
Heavy-duty GEG radial construction with a single axial split. Type ES uses lubricating grooves and holes in both rings. The 16° articulation value shown in the model table helps define angular movement around the spherical sliding surface. This construction is intended for slow oscillating or pivoting joints where a planned lubrication path is available. On EP-GEG15ES, that construction is paired with a 15 mm bore, 30 mm outside diameter, 16 mm overall width, 21.2 kN dynamic rating and 16° catalogue articulation value.
For EP-GEG15ES, the GEG heavy-duty family uses a wider radial section than the comparable GE range. Housing width and shoulder support therefore deserve extra attention when a machine needs the heavier GEG envelope but remains on a greaseable steel-on-steel system.
Installation and fit
For EP-GEG15ES, start the fit review from its 15 mm bore and 30 mm outside diameter, then check how the 16 mm bearing width is supported by the housing shoulders. The fitting-tolerance resource includes H7 and h6 among the reference classes; final fit still depends on ring loading, housing stiffness, temperature and the machine interface.
Selection Context
How to verify EP-GEG15ES in the joint
For EP-GEG15ES, before treating this model as a repeat order, compare the installed joint with the current dimensional row. Compare the complete envelope with the removed part; a matching bore by itself does not establish the correct housing fit. Check how often the joint moves, how far it articulates and whether the installed bearing can actually be reached for maintenance. For MRO replacement, send the removed bearing code, housing condition and pin measurement rather than only the nominal bore.
Cross-Reference
Brand reference for EP-GEG15ES
Cross-reference designations help identify the family. They do not replace dimensional, suffix, sealing and application checks.
| Brand | Reference designation | Verification note |
|---|---|---|
| SKF | GEH15ES | Reference designation; verify dimensions and suffix. |
| FAG | GEH15ES | Reference designation; verify dimensions and suffix. |
| ELGES | GE15FO | Reference designation; verify dimensions and suffix. |
| IKO | GE15GS | Reference designation; verify dimensions and suffix. |
Technical Documents
Drawings and order documents
Related Products
Compare the same bore across other constructions
RFQ
Request a quote for EP-GEG15ES
For EP-GEG15ES, include quantity, application, operating environment and any drawing or document requirement. The enquiry area keeps this 15 × 30 × 16 mm model in context so the quotation can be tied to the exact product rather than only the family name.
Model: EP-GEG15ES
