توضیحات
Key Specifications
| Parameter | Value | Parameter | Value |
|---|---|---|---|
| Part Number | EP-GE40ES | Series / reference | Standard Radial |
| Bore d (mm) | 40 | Outside diameter D (mm) | 62 |
| Width B (mm) | 28 | Inner-ring width C (mm) | 22 |
| Dk (mm) | 53 | R1s / R2s min | 0.6 / 1.0 mm |
| Articulation α | 7° | Dynamic load Cr | 100 kN |
| Static load C0r | 500 kN | Weight | 300 g |
| Lubrication | Relubrication required | Sealing | Open / unsealed |
| Sliding pair | Steel / steel | Surface / liner | Outer and inner rings phosphate treated |
Product Description
EP-GE40ES construction and application notes
EP-GE40ES is the 40 mm-bore model in the GE..E / GE..ES Standard Radial family. Its nominal envelope is d 40 mm × D 62 mm with B 28 mm overall width.
Outer ring with a single split in the axial direction. Type ES uses lubricating grooves and holes in the outer and inner rings. The 7° articulation value shown in the model table helps define angular movement around the spherical sliding surface. This construction is intended for slow oscillating or pivoting joints where a planned lubrication path is available. On EP-GE40ES, that construction is paired with a 40 mm bore, 62 mm outside diameter, 28 mm overall width, 100 kN dynamic rating and 7° catalogue articulation value.
For EP-GE40ES, the GE standard family uses the compact radial envelope and a serviceable steel-on-steel sliding pair. It is most relevant where periodic relubrication is already part of the machine maintenance plan and an open bearing face is acceptable.
Installation and fit
For EP-GE40ES, start the fit review from its 40 mm bore and 62 mm outside diameter, then check how the 28 mm bearing width is supported by the housing shoulders. The fitting-tolerance resource includes H7 and h6 among the reference classes; final fit still depends on ring loading, housing stiffness, temperature and the machine interface.
Selection Context
How to verify EP-GE40ES in the joint
For EP-GE40ES, for a replacement check, begin with the joint envelope and then compare the full bearing marking. Compare the complete envelope with the removed part; a matching bore by itself does not establish the correct housing fit. Also confirm whether the machine has a dependable lubrication route and whether contamination can reach either bearing face. Where the pin is worn, provide the least-damaged measurement and note whether a new pin will be installed with the bearing.
Cross-Reference
Brand reference for EP-GE40ES
Cross-reference designations help identify the family. They do not replace dimensional, suffix, sealing and application checks.
| Brand | Reference designation | Verification note |
|---|---|---|
| SKF | GE40ES | Reference designation; verify dimensions and suffix. |
| FAG | GE40ES | Reference designation; verify dimensions and suffix. |
| ELGES | GE40DO | Reference designation; verify dimensions and suffix. |
| ASK | GE40 | Reference designation; verify dimensions and suffix. |
| IKO | GE40ES | Reference designation; verify dimensions and suffix. |
| NTN | SA1~..B family | Reference designation; verify dimensions and suffix. |
Technical Documents
Drawings and order documents
Related Products
Compare the same bore across other constructions
RFQ
Request a quote for EP-GE40ES
For EP-GE40ES, include quantity, application, operating environment and any drawing or document requirement. The enquiry area keeps this 40 × 62 × 28 mm model in context so the quotation can be tied to the exact product rather than only the family name.
Model: EP-GE40ES
