Beschreibung
Key Specifications
| Parameter | Value | Parameter | Value |
|---|---|---|---|
| Part Number | EP-GE70ES 2RS | Series / reference | Sealed Standard Radial |
| Bore d (mm) | 70 | Outside diameter D (mm) | 105 |
| Width B (mm) | 49 | Inner-ring width C (mm) | 40 |
| Dk (mm) | 92 | R1s / R2s min | 1.0 / 1.0 mm |
| Articulation α | 6° | Dynamic load Cr | 315 kN |
| Static load C0r | 1560 kN | Weight | 1500 g |
| Lubrication | Nachschmierung erforderlich | Sealing | 2RS lip seals on both sides |
| Sliding pair | Steel / steel | Surface / liner | Outer and inner rings phosphate treated |
Product Description
EP-GE70ES 2RS construction and application notes
EP-GE70ES 2RS is the 70 mm-bore model in the GE..ES 2RS Sealed family. Its nominal envelope is d 70 mm × D 105 mm with B 49 mm overall width.
Single-split GE radial construction with lubricating grooves and holes plus lip seals on both bearing faces. The 2RS seals help protect the bearing faces, but seal condition, grease access and the contamination path still need to be considered in the surrounding joint. On EP-GE70ES-2RS, that construction is paired with a 70 mm bore, 105 mm outside diameter, 49 mm overall width, 315 kN dynamic rating and 6° catalogue articulation value.
For EP-GE70ES-2RS, the GE 2RS family keeps the compact GE radial envelope but adds lip sealing at both bearing faces. It suits joints where contamination control matters while scheduled relubrication is still part of normal service.
Installation and fit
For EP-GE70ES-2RS, start the fit review from its 70 mm bore and 105 mm outside diameter, then check how the 49 mm bearing width is supported by the housing shoulders. The fitting-tolerance resource includes H7 and h6 among the reference classes; final fit still depends on ring loading, housing stiffness, temperature and the machine interface.
Selection Context
How to verify EP-GE70ES-2RS in the joint
For EP-GE70ES-2RS, for a replacement check, begin with the joint envelope and then compare the full bearing marking. Compare the complete envelope with the removed part; a matching bore by itself does not establish the correct housing fit. Also confirm whether the machine has a dependable lubrication route and whether contamination can reach either bearing face. Where the pin is worn, provide the least-damaged measurement and note whether a new pin will be installed with the bearing.
Querverweis
Brand reference for EP-GE70ES 2RS
Cross-reference designations help identify the family. They do not replace dimensional, suffix, sealing and application checks.
| Brand | Reference designation | Verification note |
|---|---|---|
| SKF | GE70ES 2RS | Reference designation; verify dimensions and suffix. |
| FAG | GE70ES 2RS | Reference designation; verify dimensions and suffix. |
| ELGES | GE70DO 2RS | Reference designation; verify dimensions and suffix. |
| FRAGEN | GE702RS | Reference designation; verify dimensions and suffix. |
| IKO | GE70ES 2RS | Reference designation; verify dimensions and suffix. |
| NTN | SA1~..BSS family | Reference designation; verify dimensions and suffix. |
Technical Documents
Drawings and order documents
Related Products
Compare the same bore across other constructions
Angebotsanfrage
Request a quote for EP-GE70ES 2RS
For EP-GE70ES-2RS, include quantity, application, operating environment and any drawing or document requirement. The enquiry area keeps this 70 × 105 × 49 mm model in context so the quotation can be tied to the exact product rather than only the family name.
Model: EP-GE70ES 2RS
