Beschreibung
Key Specifications
| Parameter | Value | Parameter | Value |
|---|---|---|---|
| Part Number | EP-GE160ES | Series / reference | Standard Radial |
| Bore d (mm) | 160 | Outside diameter D (mm) | 230 |
| Width B (mm) | 105 | Inner-ring width C (mm) | 80 |
| Dk (mm) | 200 | R1s / R2s min | 1.0 / 1.0 mm |
| Articulation α | 8° | Dynamic load Cr | 1360 kN |
| Static load C0r | 6800 kN | Weight | 14000 g |
| Lubrication | Relubrication required | Sealing | Open / unsealed |
| Sliding pair | Steel / steel | Surface / liner | Outer and inner rings phosphate treated |
Product Description
EP-GE160ES construction and application notes
EP-GE160ES is the 160 mm-bore model in the GE..E / GE..ES Standard Radial family. Its nominal envelope is d 160 mm × D 230 mm with B 105 mm overall width.
Outer ring with a single split in the axial direction. Type ES uses lubricating grooves and holes in the outer and inner rings. The 8° articulation value shown in the model table helps define angular movement around the spherical sliding surface. This construction is intended for slow oscillating or pivoting joints where a planned lubrication path is available. On EP-GE160ES, that construction is paired with a 160 mm bore, 230 mm outside diameter, 105 mm overall width, 1360 kN dynamic rating and 8° catalogue articulation value.
For EP-GE160ES, the GE standard family uses the compact radial envelope and a serviceable steel-on-steel sliding pair. It is most relevant where periodic relubrication is already part of the machine maintenance plan and an open bearing face is acceptable.
Installation and fit
For EP-GE160ES, start the fit review from its 160 mm bore and 230 mm outside diameter, then check how the 105 mm bearing width is supported by the housing shoulders. The fitting-tolerance resource includes H7 and h6 among the reference classes; final fit still depends on ring loading, housing stiffness, temperature and the machine interface.
Selection Context
How to verify EP-GE160ES in the joint
For EP-GE160ES, when this model is shortlisted, use the machine drawing to confirm the surrounding shoulders before looking at alternatives. Pay particular attention to the outside diameter and overall width because both must fit the existing housing without forcing the joint. Also confirm whether the machine has a dependable lubrication route and whether contamination can reach either bearing face. For a cross-brand replacement, submit the competitor marking exactly as stamped and note any suffix that appears after the size.
Cross-Reference
Brand reference for EP-GE160ES
Cross-reference designations help identify the family. They do not replace dimensional, suffix, sealing and application checks.
| Brand | Reference designation | Verification note |
|---|---|---|
| SKF | GE160ES | Reference designation; verify dimensions and suffix. |
| FAG | GE160ES | Reference designation; verify dimensions and suffix. |
| ELGES | GE160DO | Reference designation; verify dimensions and suffix. |
| ASK | GE160 | Reference designation; verify dimensions and suffix. |
| IKO | GE160ES | Reference designation; verify dimensions and suffix. |
| NTN | SA1~..B family | Reference designation; verify dimensions and suffix. |
Technical Documents
Drawings and order documents
Related Products
Compare the same bore across other constructions
RFQ
Request a quote for EP-GE160ES
For EP-GE160ES, include quantity, application, operating environment and any drawing or document requirement. The enquiry area keeps this 160 × 230 × 105 mm model in context so the quotation can be tied to the exact product rather than only the family name.
Model: EP-GE160ES
