الوصف
Key Specifications
| Parameter | Value | Parameter | Value |
|---|---|---|---|
| Part Number | EP-GEG90ES 2RS | Series / reference | Heavy-Duty Sealed |
| Bore d (mm) | 90 | Outside diameter D (mm) | 150 |
| Width B (mm) | 85 | Inner-ring width C (mm) | 55 |
| Dk (mm) | 130 | R1s / R2s min | 1.0 / 1.0 mm |
| Articulation α | 15° | Dynamic load Cr | 610 kN |
| Static load C0r | 3050 kN | Weight | 5400 g |
| Lubrication | Relubrication required | Sealing | 2RS lip seals on both sides |
| Sliding pair | Steel / steel | Surface / liner | Outer and inner rings phosphate treated |
Product Description
EP-GEG90ES 2RS construction and application notes
EP-GEG90ES 2RS is the 90 mm-bore model in the GEG..ES 2RS Heavy-Duty Sealed family. Its nominal envelope is d 90 mm × D 150 mm with B 85 mm overall width.
Single-split heavy-duty GEG geometry, lubricating grooves and holes in both rings, plus 2RS lip seals on both faces. The 2RS seals help protect the bearing faces, but seal condition, grease access and the contamination path still need to be considered in the surrounding joint. On EP-GEG90ES-2RS, that construction is paired with a 90 mm bore, 150 mm outside diameter, 85 mm overall width, 610 kN dynamic rating and 15° catalogue articulation value.
For EP-GEG90ES-2RS, the sealed GEG family combines the wider heavy-duty radial geometry with lip seals on both faces. It is intended for exposed oscillating joints that justify the larger section while still retaining a planned grease route.
Installation and fit
For EP-GEG90ES-2RS, start the fit review from its 90 mm bore and 150 mm outside diameter, then check how the 85 mm bearing width is supported by the housing shoulders. The fitting-tolerance resource includes H7 and h6 among the reference classes; final fit still depends on ring loading, housing stiffness, temperature and the machine interface.
Selection Context
How to verify EP-GEG90ES-2RS in the joint
For EP-GEG90ES-2RS, when this model is shortlisted, use the machine drawing to confirm the surrounding shoulders before looking at alternatives. Check the shoulder geometry around the listed width and outside diameter, especially when the old bearing or housing shows wear. The service review should record motion amplitude, inspection access and the way grease or a maintenance-free liner is expected to work. Use the enquiry form to keep the selected model attached to the application, drawing and document request.
Cross-Reference
Brand reference for EP-GEG90ES 2RS
Cross-reference designations help identify the family. They do not replace dimensional, suffix, sealing and application checks.
| Brand | Reference designation | Verification note |
|---|---|---|
| SKF | GEH90ES 2RS | Reference designation; verify dimensions and suffix. |
| FAG | GEH90ES 2RS | Reference designation; verify dimensions and suffix. |
| ELGES | GE90FO 2RS | Reference designation; verify dimensions and suffix. |
| IKO | GE90GS 2RS | Reference designation; verify dimensions and suffix. |
Technical Documents
Drawings and order documents
Related Products
Compare the same bore across other constructions
RFQ
Request a quote for EP-GEG90ES 2RS
For EP-GEG90ES-2RS, include quantity, application, operating environment and any drawing or document requirement. The enquiry area keeps this 90 × 150 × 85 mm model in context so the quotation can be tied to the exact product rather than only the family name.
Model: EP-GEG90ES 2RS
