Tag Archives: kit bearing

China manufacturer High Precision Stiffness Wheel Rolling Mill Mine Self Aligning Ball Bearing bearing driver kit

Product Description

High Precision Stiffness Wheel Rolling Mill Mine Self Aligning Ball Bearing

Product Description

Self Aligning Ball Bearings

Self aligning ball bearings have 2 rows of balls, a common sphered raceway in the outer ring and 2 deep uninterrupted raceway grooves in the inner ring. Self aligning ball bearings are insensitive to angular misalignment of the shaft relative to the housing, which can be caused, for example, by shaft deflection or housing deformations. Self aligning ball bearings are suitable for applications where the shaft relative to the housing bore is prone to angular misalignments. Under normal loads, depending on the dimensional series, the maximum permissible angular misalignment is approximately 2° to 4°. These bearings are available in open and sealed versions and inner rings with a cylindrical or tapered bore.

Product Parameters

Bearing NO. Principal dimensions Speed ratings(r/min) Basic load ratings
d D B / C / T Grease Oil (kN) (kN)
Dynamic Static
1203 17 40 12 16000 20000 7.9 2.02
1203K 17 40 12 16000 20000 7.9 2.02
1204 20 47 14 14000 17000 9.95 2.65
1204K 20 47 14 14000 17000 9.95 2.65
1205 25 52 15 12000 14000 12 3.3
1205K 25 52 15 12000 14000 12 3.3
1206 30 62 16 10000 12000 15.8 4.7
1206K 30 62 16 10000 12000 15.8 4.7
1207 35 72 17 8500 10000 15.8 5.08
1207K 35 72 17 8500 10000 15.8 5.08
1208 40 80 18 7500 9000 19.2 6.4
1208K 40 80 18 7500 9000 19.2 6.4
1209 45 85 19 7100 8500 21.8 7.32
1209K 45 85 19 7100 8500 21.8 7.32
1210 50 90 20 6300 8000 22.8 8.08
1210K 50 90 20 6300 8000 22.8 8.08
1211 55 100 21 6000 7100 26.8 10
1211K 55 100 21 6000 7100 26.8 10
1212 60 110 22 5300 6300 30.2 11.5
1212K 60 110 22 5300 6300 30.2 11.5
1213 65 120 23 4800 6000 31 12.5
1213K 65 120 23 4800 6000 31 12.5
1214 70 125 24 4800 5600 34.5 13.5
1214K 70 125 24 4800 5600 34.5 13.5
1215 75 130 25 4300 5300 38.8 15.2
1215K 75 130 25 4300 5300 38.8 15.2
1216 80 140 26 4000 5000 39.5 16.8
1216K 80 140 26 4000 5000 39.5 16.8
1217 85 150 28 3800 4500 48.8 20.5
1217K 85 150 28 3800 4500 48.8 20.5

Detailed Photos

Company Profile

HangZhou HONGSHI MACHINERY AND ELECTRICAL EQUIPMENT CO.,LTD. (formerly HangZhou Hengmai Bearing Co., Ltd.) was established in 2007, and HMMH is our own brand.
HMMH mainly produces spherical roller bearings, pillow block ball bearing, deep groove ball bearings and cylindrical roller bearings. Spherical roller bearing products range from 20mm to 1M, with the main production of crusher bearings 22300 series. Low noise deep groove ball bearings, product accuracy can reach ZV2, ZV3, ZV4, mainly produces motor bearings 6200, 6300 series. pillow block ball bearing, mainly producing UCP, UCF, UCFL, UCFC, UCT series, the products are mainly used in agricultural machine and peeling machine. We also use the bainite quenching process to ensure the hardness of the bearing, using good testing equipment, such as roundness meter, profiler, roughness meter, universal measuring instrument, spectrometer, metallographic microscope to control each detail quality monitoring.

To ensure product quality, we have established a strict quality control system and an experienced team of engineers and after-sales service. From forgings to final products  we have a strict quality control system.

Your needs are our production motivation, and your satisfaction is our goal. We are willing to serve our customers with the goal of “Quality First, Service First, Credit First”.

FAQ

1.A:How can I do customized design?
   Q:We are request for the drawing with the measurement, material and other speicifcation as details as you can, and for the customized products, our MOQ is 10 pcs per design

2.Q: How can I get a sample?
   A: If you only need 1or 2 samples for small size inner weight below 2kgs, we can supply free samples and we have stocks, you can just pay the shipping cost .if you need several design samples, then you should paid the cost with shipping.

3.Q: What package do you usually use?
   A: Usually we use single box or tape. Also according to customer’s special requirement.

4.Q:How long do you need for production? Or what’s your production lead time?
   A:Usually could be sent our in 2-3 days if in stock for samples. Customized item usually need 14-30 days to produce.

5.Q:How long will you guarantee your quality?
   A:We supply test report and quality control photos from materials to finished goods during production.
 
6.Q:How to do after sale service?
   A:Good after-sale service is our promise. Before placing orders, our professional engineer will discuss all technical data and your bearing usage condition and CZPT you what kind of steel materials to fit your products and usage life possible.

 

 

 

/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

Product Name: Self-Aligning Roller Bearing
Quality: High Quality
Rolling Body: Roller Bearings
Contact Angle: Normal
Material: Bearing Steel
Spherical: Aligning Bearings
Customization:
Available

|

Customized Request

self aligning bearing

How do innovations and advancements in self-aligning bearing technology impact their use?

Advancements and innovations in self-aligning bearing technology have a significant impact on their use in various industries. Here’s a detailed explanation:

  • Improved Performance:

Innovations in self-aligning bearing technology often result in improved performance characteristics. These advancements can include:

  • Load Capacity: New bearing designs and materials can enhance the load-carrying capacity of self-aligning bearings, allowing them to withstand higher loads or operate under more demanding conditions.
  • Speed Capability: Advancements in bearing manufacturing techniques and materials can increase the maximum rotational speed at which self-aligning bearings can operate effectively, enabling their use in high-speed applications.
  • Friction Reduction: Innovations in bearing design, lubrication, and surface treatments contribute to reducing friction and energy losses, resulting in improved efficiency and reduced operating costs.
  • Sealing and Contamination Resistance: New sealing technologies and materials can enhance the sealing performance of self-aligning bearings, providing better protection against contaminants, moisture, and harsh environmental conditions.
  • Temperature and Corrosion Resistance: Advances in bearing materials and coatings enable self-aligning bearings to withstand extreme temperatures, aggressive chemicals, and corrosive environments, expanding their range of applications.
  • Extended Service Life:

Innovations in self-aligning bearing technology often result in improved durability and longevity. These advancements can include:

  • Materials: The development of new bearing materials, such as advanced steels, ceramics, or composites, can significantly enhance the bearing’s resistance to wear, fatigue, and surface damage, leading to extended service life.
  • Lubrication: Advancements in lubrication technologies, such as the use of solid lubricants or advanced grease formulations, can provide better film formation, reduce friction, and minimize wear, thereby increasing the bearing’s operating life.
  • Surface Treatments: Innovative surface treatments, such as coatings or finishes, can improve the bearing’s resistance to corrosion, wear, and fretting, contributing to longer service intervals and reduced maintenance requirements.
  • Condition Monitoring: The integration of sensor technologies and data analytics in self-aligning bearings enables real-time monitoring of operating conditions, allowing for proactive maintenance and early detection of potential failures, thus maximizing the bearing’s service life.
  • Application Expansion:

Advancements in self-aligning bearing technology often lead to an expansion of their application range. These advancements can include:

  • New Industries: Innovations in self-aligning bearing technology can enable their use in industries or applications where they were previously not feasible. This opens up opportunities in emerging sectors, such as renewable energy, electric vehicles, robotics, or medical devices.
  • Challenging Environments: Improved performance characteristics, such as enhanced sealing, temperature resistance, or contamination resistance, allow self-aligning bearings to be deployed in challenging environments, including offshore installations, high-temperature processes, or chemically aggressive applications.
  • Specialized Applications: Advancements in self-aligning bearing technology can lead to the development of specialized bearing variants tailored for specific applications, such as high-speed machining, precision equipment, or demanding industrial automation systems.

Overall, innovations and advancements in self-aligning bearing technology bring about enhanced performance, extended service life, and expanded application possibilities. These advancements drive improvements in industrial productivity, reliability, and efficiency, making self-aligning bearings a valuable component in a wide range of industries and applications.

self aligning bearing

How do self-aligning bearings perform in applications with varying loads and misalignment challenges?

Self-aligning bearings are specifically designed to perform exceptionally well in applications with varying loads and misalignment challenges. Here’s an in-depth explanation of their performance characteristics:

  • Misalignment Compensation:

Self-aligning bearings are capable of accommodating various types of misalignment, including angular misalignment and shaft deflection. They feature a design that incorporates two rows of rolling elements, such as balls or rollers, and a spherical outer ring raceway. This design allows the bearing to self-align, adapting to misalignment caused by factors such as shaft deflection, mounting errors, thermal expansion, and vibrations. Self-aligning bearings can handle misalignment within certain limits, maintaining proper alignment between the mating components and minimizing additional stresses on the bearing.

  • Load-Carrying Capacity:

Self-aligning bearings are engineered to handle high loads, both radial and axial. They have a robust construction with larger rolling elements and increased contact area, enabling them to distribute the load more effectively. This enhanced load-carrying capacity makes self-aligning bearings suitable for applications where varying loads are encountered. Whether it’s fluctuating radial loads, axial loads, or a combination of both, self-aligning bearings can handle the dynamic forces and provide reliable performance.

  • Flexibility and Versatility:

Self-aligning bearings offer flexibility and versatility in applications with varying loads and misalignment challenges. They can operate in conditions where shafts are not perfectly aligned or where there are slight shaft movements. This flexibility allows for easier installation and alignment adjustments, reducing the time and effort required for precise positioning of the bearing. Additionally, self-aligning bearings are available in different designs and configurations, including ball bearings and roller bearings, providing options to match specific application requirements.

  • Reduced Friction and Heat Generation:

Self-aligning bearings are designed to minimize friction and heat generation during operation. The rolling elements and raceways are precisely engineered to reduce contact stresses and optimize the distribution of forces. This results in lower friction levels and reduced heat buildup, enhancing the overall efficiency and reliability of the bearing in applications where varying loads and misalignment challenges are present.

  • Extended Service Life:

Due to their ability to accommodate misalignment and handle varying loads, self-aligning bearings contribute to an extended service life of the machinery. By reducing the stresses and excessive forces on the bearing and its surrounding components, self-aligning bearings help minimize wear, prevent premature failure, and increase the overall durability of the equipment.

In summary, self-aligning bearings excel in applications with varying loads and misalignment challenges. Their ability to compensate for misalignment, handle high loads, provide flexibility in installation, and reduce friction and heat generation makes them well-suited for industries such as mining, construction, paper manufacturing, steel production, and many others where these challenges are prevalent.

self aligning bearing

Can you explain the advantages and unique features of self-aligning bearings?

Self-aligning bearings offer several advantages and unique features that make them suitable for a wide range of applications. Here’s a detailed explanation of the advantages and unique features of self-aligning bearings:

  • Misalignment Compensation:

One of the primary advantages of self-aligning bearings is their ability to accommodate misalignment between the shaft and the housing. This includes angular misalignment, axial misalignment, and shaft deflection. The self-aligning design allows the bearing to adjust its position and compensate for these misalignments, ensuring smooth operation and reducing stress on the bearing components.

  • Reduced Friction and Wear:

Self-aligning bearings help reduce friction and wear in machinery. By accommodating misalignment, they distribute the load more evenly across the rolling elements and raceways, minimizing localized stresses. This results in lower friction, reduced wear, and longer bearing life. Additionally, the self-aligning capability helps prevent excessive heat generation, which can further contribute to reduced friction and wear.

  • Shock and Vibration Absorption:

Self-aligning bearings have the unique ability to absorb shocks and vibrations that occur during operation. The spherical outer ring raceway allows the bearing to move and adjust its position, effectively dampening the impact of shocks and vibrations. This helps improve the overall stability of the machinery, reduces the transmission of vibrations, and protects other components from excessive forces.

  • Easy Installation and Maintenance:

Self-aligning bearings are relatively easy to install and maintain. During installation, their self-aligning capability simplifies the alignment process, as slight misalignments can be accommodated. This saves time and effort in achieving precise alignment. Additionally, self-aligning bearings are typically designed for easy maintenance, allowing for straightforward tasks such as re-greasing or replacement without requiring complex disassembly.

  • Wide Application Range:

Self-aligning bearings are versatile and find applications in various industries and machinery. They are commonly used in applications where misalignment is expected, such as in heavy machinery, conveyor systems, agricultural equipment, and mining operations. The ability to accommodate misalignment makes self-aligning bearings suitable for challenging environments and dynamic operating conditions.

  • Cost-Effective Solution:

Self-aligning bearings offer a cost-effective solution in many applications. Their ability to compensate for misalignment helps prevent premature failure and reduces the need for frequent maintenance or realignment. This can result in cost savings by extending the bearing’s service life, improving overall machinery reliability, and reducing downtime for repairs or replacements.

In summary, self-aligning bearings provide advantages such as misalignment compensation, reduced friction and wear, shock and vibration absorption, easy installation and maintenance, wide application range, and cost-effectiveness. These unique features make them a valuable choice for various industries and applications where misalignment and dynamic operating conditions are present.

China manufacturer High Precision Stiffness Wheel Rolling Mill Mine Self Aligning Ball Bearing   bearing driver kitChina manufacturer High Precision Stiffness Wheel Rolling Mill Mine Self Aligning Ball Bearing   bearing driver kit
editor by CX 2024-05-15

China OEM High Precision Self-Aligning Ball Bearing S1207 Made in China bearing driver kit

Product Description

 

Product Description

 

 

Product Parameters

 

 Self aligning ball bearings mainly bear radial loads and can also withstand small axial loads. The axial displacement of the
shaft (shell) is limited within the clearance limit, with automatic centering performance, allowing normal operation under
conditions of relatively small internal and external inclination. It is suitable for components where the support seat hole cannot
strictly guarantee coaxiality. Self aligning ball bearings are suitable for bearing heavy and impact loads, precision instruments,
low noise motors, automobiles, motorcycles, metallurgy, rolling mills, mines, petroleum, papermaking, cement, sugar squeezing
and other industries, as well as general machinery.

Type

BALL

Structure

Self-Aligning

Applicable Industries

Food Shop, Energy & Mining, Food & Beverage Shops, Advertising Company

Precision Rating

P0 P6 P5 P4 P2

Seals Type

OPEN OR SEAL

Number of Row

Double row

Product name

Self-aligning Roller Bearing

Our business:Produce and customize various bearing brands. (Packaging and logo can be customized. All copyright belongs to the customer. We promise not to disclose any information.)

Self-aligning ball bearings 1200series 1226
1300series
2200series
2300series

Company Profile

 

Our Factory

 

/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

Product Name: Self-Aligning Ball Bearing
Material: Bearing Steel
Cage Material: Steel /Copper /Nylon Cage
Seal Type: Open
Weight: 0.26kg
Aligning: Aligning Bearing
Samples:
US$ 10/Piece
1 Piece(Min.Order)

|
Request Sample

Customization:
Available

|

Customized Request

self aligning bearing

How do self-aligning bearings enhance the overall efficiency and functionality of machinery and equipment?

Self-aligning bearings play a crucial role in enhancing the overall efficiency and functionality of machinery and equipment. Here’s a detailed explanation:

  • Compensation for Misalignment:

One of the key benefits of self-aligning bearings is their ability to compensate for misalignment between the shaft and the housing. Misalignment can occur due to various factors such as shaft deflection, thermal expansion, or mounting errors. Self-aligning bearings have the capability to accommodate angular misalignment, axial displacement, and shaft deflection, ensuring smooth operation even in challenging conditions. By accommodating misalignment, self-aligning bearings minimize stress and wear on other components, reducing the risk of premature failure and improving overall machinery efficiency.

  • Reduced Friction and Energy Consumption:

Self-aligning bearings are designed to operate with low friction, which helps to reduce energy consumption within the machinery or equipment. The rolling elements and raceways of self-aligning bearings are precisely engineered to minimize contact friction. This reduced friction results in lower power losses, allowing the machinery to operate more efficiently and potentially leading to energy savings.

  • Increased Reliability and Service Life:

Self-aligning bearings contribute to the overall reliability and service life of machinery and equipment. By accommodating misalignment and reducing friction, they help to distribute loads evenly, minimize stress concentrations, and prevent premature wear and failures. This improved load distribution and reduced friction can extend the service life of other critical components, such as gears, shafts, and seals. Additionally, self-aligning bearings often feature robust designs and high-quality materials, further enhancing their durability and reliability in demanding operating conditions.

  • Enhanced Performance in Challenging Environments:

Self-aligning bearings are well-suited for applications in challenging environments. They can withstand conditions such as high temperatures, extreme speeds, or contaminated operating conditions. The ability to accommodate misalignment and the use of specialized bearing materials and lubricants enable self-aligning bearings to maintain their performance and functionality in adverse conditions. This enhances the overall efficiency and reliability of machinery and equipment in industries such as mining, steel, paper, and food processing.

  • Ease of Installation and Maintenance:

Self-aligning bearings are designed for ease of installation and maintenance. Their self-aligning capability simplifies the alignment process during installation, reducing the time and effort required. Additionally, self-aligning bearings often feature integrated seals or shields that help to protect against contamination and retain lubrication, resulting in reduced maintenance requirements. The ease of installation and maintenance of self-aligning bearings contributes to the overall efficiency of machinery and equipment by minimizing downtime and improving overall operational productivity.

Overall, self-aligning bearings enhance the efficiency and functionality of machinery and equipment by accommodating misalignment, reducing friction and energy consumption, increasing reliability and service life, performing well in challenging environments, and enabling easier installation and maintenance. By incorporating self-aligning bearings into their designs, engineers and equipment manufacturers can optimize performance, reduce downtime, and improve the overall efficiency of their machinery and equipment.

self aligning bearing

What is the impact of proper lubrication and maintenance on the performance and lifespan of self-aligning bearings?

Proper lubrication and maintenance have a significant impact on the performance and lifespan of self-aligning bearings. Here’s a detailed explanation of their importance:

  • Lubrication:

Proper lubrication is crucial for self-aligning bearings as it provides a protective film between the rolling elements and raceways, reducing friction and wear. Here are the key impacts of proper lubrication:

  • Reduced Friction and Wear: Adequate lubrication helps minimize friction and wear between the rolling elements and raceways. This reduces heat generation, prevents excessive wear, and extends the bearing’s lifespan.
  • Optimized Load Distribution: Proper lubrication ensures that the load is distributed evenly across the bearing components. This helps prevent localized stresses and improves the overall load-carrying capacity of the bearing.
  • Corrosion and Contamination Protection: Lubrication forms a protective barrier that helps prevent corrosion and protects the bearing against contaminants such as dust, dirt, and moisture. This enhances the bearing’s resistance to damage and maintains its performance in challenging environments.
  • Noise and Vibration Reduction: Properly lubricated bearings exhibit reduced noise and vibration levels, contributing to smoother and quieter operation of the machinery.
  • Maintenance:

Regular maintenance practices are essential for ensuring the optimal performance and lifespan of self-aligning bearings. Here are the key impacts of proper maintenance:

  • Early Detection of Issues: Regular inspections and maintenance activities enable the early detection of potential problems such as misalignment, excessive wear, or lubrication issues. Timely identification of these issues allows for proactive measures to be taken, preventing further damage and minimizing downtime.
  • Preservation of Alignment: Proper maintenance helps ensure the correct alignment of the bearing with its mating components. This is particularly important for self-aligning bearings, as misalignment beyond their specified limits can lead to decreased performance and premature failure.
  • Lubrication Monitoring: Maintenance involves monitoring the lubrication condition, including oil or grease quality, contamination levels, and replenishment requirements. Regular lubrication checks and replenishment help maintain the optimal lubricating film and extend the bearing’s service life.
  • Cleaning and Debris Removal: Maintenance activities include cleaning the bearing and its surrounding areas, removing accumulated debris, and ensuring proper sealing. This helps prevent contamination and ensures the smooth operation of the bearing.
  • Replacement of Worn Components: Through maintenance, worn or damaged components can be identified and replaced, preventing further damage and maintaining the bearing’s performance. This can include replacing seals, cages, or damaged rolling elements.

Proper lubrication and maintenance practices are essential for maximizing the performance and lifespan of self-aligning bearings. They help reduce friction, prevent excessive wear, protect against corrosion and contaminants, preserve alignment, and enable early detection of potential issues. Adhering to manufacturer recommendations and industry best practices for lubrication and maintenance ensures the reliable and efficient operation of machinery and extends the service life of self-aligning bearings.

self aligning bearing

What are the common types of self-aligning bearings, such as spherical or barrel roller bearings?

There are several common types of self-aligning bearings, each offering unique features and advantages. Here’s a detailed explanation of some of the common types:

  • Spherical Roller Bearings:

Spherical roller bearings are one of the most common types of self-aligning bearings. They have a spherical outer ring raceway and two rows of barrel-shaped rollers positioned between the inner and outer rings. This design allows for the accommodation of misalignment and provides high radial load-carrying capacity. Spherical roller bearings are commonly used in heavy-duty applications, such as mining equipment, paper mills, and crushers.

  • Barrel Roller Bearings:

Barrel roller bearings, also known as toroidal roller bearings, have a barrel-shaped roller arrangement with a concave outer ring raceway and a convex inner ring raceway. This design enables the bearing to accommodate misalignment and axial displacement. Barrel roller bearings are suitable for applications with high radial loads and moderate axial loads, such as in conveyor systems, printing presses, and industrial gearboxes.

  • Self-Aligning Ball Bearings:

Self-aligning ball bearings consist of an inner ring with two rows of balls and an outer ring with a spherical raceway. The design allows for misalignment compensation and is particularly suited for applications with low to moderate radial loads and moderate axial loads. Self-aligning ball bearings are commonly used in electric motors, pumps, and automotive applications.

  • Self-Aligning Thrust Roller Bearings:

Self-aligning thrust roller bearings are designed to accommodate misalignment in applications with axial loads. They have a spherical rolling element between the shaft washer and the housing washer, allowing for misalignment compensation. These bearings are commonly used in applications such as screw conveyors, heavy machinery, and marine propulsion systems.

  • Adapter Sleeve Bearings:

Adapter sleeve bearings are a type of self-aligning bearing that incorporates an adapter sleeve, which facilitates easy mounting and dismounting of the bearing. They are commonly used in applications where frequent bearing replacement or adjustment is required. Adapter sleeve bearings are often employed in conveyor systems, agricultural machinery, and textile equipment.

These are just a few examples of common types of self-aligning bearings. Other variations and specialized designs exist to suit specific application requirements. It’s important to consider factors such as load capacity, operating conditions, and dimensional constraints when selecting the appropriate self-aligning bearing for a particular application.

China OEM High Precision Self-Aligning Ball Bearing S1207 Made in China   bearing driver kitChina OEM High Precision Self-Aligning Ball Bearing S1207 Made in China   bearing driver kit
editor by CX 2024-05-03

China Best Sales Motorcycle Spare Part Cylindrical Rolling Bearings Self-Aligning Roller Bearing with Two Rows Balls bearing driver kit

Product Description

Motorcycle Spare Part Cylindrical Rolling Bearings Self-aligning Roller Bearing with Two Rows Balls

Product Description

Self Aligning Ball Bearings

Self aligning ball bearings have 2 rows of balls, a common sphered raceway in the outer ring and 2 deep uninterrupted raceway grooves in the inner ring. Self aligning ball bearings are insensitive to angular misalignment of the shaft relative to the housing, which can be caused, for example, by shaft deflection or housing deformations. Self aligning ball bearings are suitable for applications where the shaft relative to the housing bore is prone to angular misalignments. Under normal loads, depending on the dimensional series, the maximum permissible angular misalignment is approximately 2° to 4°. These bearings are available in open and sealed versions and inner rings with a cylindrical or tapered bore.

Product Parameters

Bearing NO. Principal dimensions Speed ratings(r/min) Basic load ratings
d D B / C / T Grease Oil (kN) (kN)
Dynamic Static
1203 17 40 12 16000 20000 7.9 2.02
1203K 17 40 12 16000 20000 7.9 2.02
1204 20 47 14 14000 17000 9.95 2.65
1204K 20 47 14 14000 17000 9.95 2.65
1205 25 52 15 12000 14000 12 3.3
1205K 25 52 15 12000 14000 12 3.3
1206 30 62 16 10000 12000 15.8 4.7
1206K 30 62 16 10000 12000 15.8 4.7
1207 35 72 17 8500 10000 15.8 5.08
1207K 35 72 17 8500 10000 15.8 5.08
1208 40 80 18 7500 9000 19.2 6.4
1208K 40 80 18 7500 9000 19.2 6.4
1209 45 85 19 7100 8500 21.8 7.32
1209K 45 85 19 7100 8500 21.8 7.32
1210 50 90 20 6300 8000 22.8 8.08
1210K 50 90 20 6300 8000 22.8 8.08
1211 55 100 21 6000 7100 26.8 10
1211K 55 100 21 6000 7100 26.8 10
1212 60 110 22 5300 6300 30.2 11.5
1212K 60 110 22 5300 6300 30.2 11.5
1213 65 120 23 4800 6000 31 12.5
1213K 65 120 23 4800 6000 31 12.5
1214 70 125 24 4800 5600 34.5 13.5
1214K 70 125 24 4800 5600 34.5 13.5
1215 75 130 25 4300 5300 38.8 15.2
1215K 75 130 25 4300 5300 38.8 15.2
1216 80 140 26 4000 5000 39.5 16.8
1216K 80 140 26 4000 5000 39.5 16.8
1217 85 150 28 3800 4500 48.8 20.5
1217K 85 150 28 3800 4500 48.8 20.5

Detailed Photos

Company Profile

HangZhou HONGSHI MACHINERY AND ELECTRICAL EQUIPMENT CO.,LTD. (formerly HangZhou Hengmai Bearing Co., Ltd.) was established in 2007, and HMMH is our own brand.
HMMH mainly produces spherical roller bearings, pillow block ball bearing, deep groove ball bearings and cylindrical roller bearings. Spherical roller bearing products range from 20mm to 1M, with the main production of crusher bearings 22300 series. Low noise deep groove ball bearings, product accuracy can reach ZV2, ZV3, ZV4, mainly produces motor bearings 6200, 6300 series. pillow block ball bearing, mainly producing UCP, UCF, UCFL, UCFC, UCT series, the products are mainly used in agricultural machine and peeling machine. We also use the bainite quenching process to ensure the hardness of the bearing, using good testing equipment, such as roundness meter, profiler, roughness meter, universal measuring instrument, spectrometer, metallographic microscope to control each detail quality monitoring.

To ensure product quality, we have established a strict quality control system and an experienced team of engineers and after-sales service. From forgings to final products  we have a strict quality control system.

Your needs are our production motivation, and your satisfaction is our goal. We are willing to serve our customers with the goal of “Quality First, Service First, Credit First”.

FAQ

1.A:How can I do customized design?
   Q:We are request for the drawing with the measurement, material and other speicifcation as details as you can, and for the customized products, our MOQ is 10 pcs per design

2.Q: How can I get a sample?
   A: If you only need 1or 2 samples for small size inner weight below 2kgs, we can supply free samples and we have stocks, you can just pay the shipping cost .if you need several design samples, then you should paid the cost with shipping.

3.Q: What package do you usually use?
   A: Usually we use single box or tape. Also according to customer’s special requirement.

4.Q:How long do you need for production? Or what’s your production lead time?
   A:Usually could be sent our in 2-3 days if in stock for samples. Customized item usually need 14-30 days to produce.

5.Q:How long will you guarantee your quality?
   A:We supply test report and quality control photos from materials to finished goods during production.
 
6.Q:How to do after sale service?
   A:Good after-sale service is our promise. Before placing orders, our professional engineer will discuss all technical data and your bearing usage condition and CZPT you what kind of steel materials to fit your products and usage life possible.

 

 

 

  /* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

Product Name: Self-Aligning Roller Bearing
Quality: High Quality
Rolling Body: Roller Bearings
Contact Angle: Normal
Material: Bearing Steel
Spherical: Aligning Bearings
Customization:
Available

|

Customized Request

self aligning bearing

Are there specific considerations for choosing self-aligning bearings in applications with challenging operating conditions or varying misalignment requirements?

Yes, there are specific considerations to take into account when choosing self-aligning bearings for applications with challenging operating conditions or varying misalignment requirements. Here’s a detailed explanation:

  • Operating Conditions:

When selecting self-aligning bearings for challenging operating conditions, it’s important to consider factors such as temperature, speed, load, and environmental conditions. High temperatures, extreme speeds, heavy loads, and harsh environments can all impact the performance and durability of the bearing. In such cases, it may be necessary to choose self-aligning bearings with special heat-resistant materials, high-speed capabilities, increased load-carrying capacity, or enhanced corrosion resistance. Additionally, proper lubrication selection and maintenance practices become crucial to ensure optimal performance and longevity of the bearings.

  • Misalignment Requirements:

Self-aligning bearings are specifically designed to accommodate misalignment between the shaft and the housing. However, different applications may have varying misalignment requirements. It’s important to consider the magnitude and type of misalignment that the bearing will experience. Some self-aligning bearings can accommodate larger misalignments, while others are designed for smaller or specific types of misalignments, such as angular or parallel misalignment. Understanding the misalignment characteristics of the application is essential to select the appropriate self-aligning bearings that can effectively handle the expected misalignment conditions.

  • Load Capacity and Dynamic Performance:

In applications with challenging operating conditions, it’s crucial to assess the load capacity and dynamic performance requirements of the self-aligning bearings. Heavy loads, shock loads, or vibrations can significantly affect the bearing’s performance and service life. It’s important to choose self-aligning bearings with adequate load-carrying capacity, high shock resistance, and robust construction to withstand the demanding conditions. Additionally, the dynamic performance of the bearing, including factors such as rotational speed, acceleration, and deceleration, should be carefully evaluated to ensure that the selected bearings can meet the application’s performance requirements.

  • Sealing and Contamination Prevention:

In challenging operating conditions, effective sealing and contamination prevention become crucial for self-aligning bearings. Dust, dirt, moisture, and other contaminants can significantly impact the bearing’s performance and service life. It’s important to select self-aligning bearings with appropriate sealing solutions, such as contact seals, non-contact seals, or hybrid seals, depending on the specific application requirements. These seals help prevent the ingress of contaminants and maintain the integrity of the bearing’s internal components, ensuring reliable operation even in harsh environments.

  • Lubrication and Maintenance:

Lubrication and maintenance practices are critical considerations for self-aligning bearings in challenging operating conditions. Proper lubrication selection, including the choice of lubricant type, viscosity, and replenishment frequency, is essential to ensure optimal bearing performance and minimize the risk of premature wear or failure. Additionally, adhering to appropriate maintenance practices, such as regular inspections, re-lubrication, and monitoring of operating conditions, can help identify any potential issues early on and prevent costly downtime or unexpected failures.

By considering these specific factors and requirements, engineers can choose the most suitable self-aligning bearings for applications with challenging operating conditions or varying misalignment requirements. Taking into account the unique demands of the application ensures optimal performance, durability, and reliability of the self-aligning bearings in even the most demanding environments.

self aligning bearing

How do self-aligning bearings perform in applications with varying loads and misalignment challenges?

Self-aligning bearings are specifically designed to perform exceptionally well in applications with varying loads and misalignment challenges. Here’s an in-depth explanation of their performance characteristics:

  • Misalignment Compensation:

Self-aligning bearings are capable of accommodating various types of misalignment, including angular misalignment and shaft deflection. They feature a design that incorporates two rows of rolling elements, such as balls or rollers, and a spherical outer ring raceway. This design allows the bearing to self-align, adapting to misalignment caused by factors such as shaft deflection, mounting errors, thermal expansion, and vibrations. Self-aligning bearings can handle misalignment within certain limits, maintaining proper alignment between the mating components and minimizing additional stresses on the bearing.

  • Load-Carrying Capacity:

Self-aligning bearings are engineered to handle high loads, both radial and axial. They have a robust construction with larger rolling elements and increased contact area, enabling them to distribute the load more effectively. This enhanced load-carrying capacity makes self-aligning bearings suitable for applications where varying loads are encountered. Whether it’s fluctuating radial loads, axial loads, or a combination of both, self-aligning bearings can handle the dynamic forces and provide reliable performance.

  • Flexibility and Versatility:

Self-aligning bearings offer flexibility and versatility in applications with varying loads and misalignment challenges. They can operate in conditions where shafts are not perfectly aligned or where there are slight shaft movements. This flexibility allows for easier installation and alignment adjustments, reducing the time and effort required for precise positioning of the bearing. Additionally, self-aligning bearings are available in different designs and configurations, including ball bearings and roller bearings, providing options to match specific application requirements.

  • Reduced Friction and Heat Generation:

Self-aligning bearings are designed to minimize friction and heat generation during operation. The rolling elements and raceways are precisely engineered to reduce contact stresses and optimize the distribution of forces. This results in lower friction levels and reduced heat buildup, enhancing the overall efficiency and reliability of the bearing in applications where varying loads and misalignment challenges are present.

  • Extended Service Life:

Due to their ability to accommodate misalignment and handle varying loads, self-aligning bearings contribute to an extended service life of the machinery. By reducing the stresses and excessive forces on the bearing and its surrounding components, self-aligning bearings help minimize wear, prevent premature failure, and increase the overall durability of the equipment.

In summary, self-aligning bearings excel in applications with varying loads and misalignment challenges. Their ability to compensate for misalignment, handle high loads, provide flexibility in installation, and reduce friction and heat generation makes them well-suited for industries such as mining, construction, paper manufacturing, steel production, and many others where these challenges are prevalent.

self aligning bearing

Can you describe the load-carrying capacity and load ratings of self-aligning bearings?

Self-aligning bearings are designed to carry both radial and axial loads, and their load-carrying capacity is an essential consideration for their proper selection and application. Here’s a detailed description of the load-carrying capacity and load ratings of self-aligning bearings:

  • Radial Load Capacity:

The radial load capacity of a self-aligning bearing refers to its ability to carry loads that act perpendicular to the axis of rotation. It is influenced by factors such as bearing geometry, material properties, and internal design. Self-aligning bearings, particularly spherical roller bearings, are known for their high radial load-carrying capacity. This is due to their construction that includes multiple rows of robust rolling elements and optimized raceway profiles. The larger contact area between the rolling elements and raceways allows for efficient load distribution, enabling the bearing to handle substantial radial loads.

  • Axial Load Capacity:

The axial load capacity of a self-aligning bearing refers to its ability to carry loads that act parallel to the axis of rotation. The axial load-carrying capacity depends on the bearing type and design, as well as the arrangement of rolling elements. Self-aligning thrust roller bearings, for example, are specifically designed to handle significant axial loads. They utilize cylindrical or tapered rolling elements arranged in a specific orientation to withstand axial forces. Self-aligning ball bearings can also carry moderate axial loads in addition to their primary radial load-carrying capacity.

  • Dynamic Load Rating:

The dynamic load rating of a self-aligning bearing is a standardized value that indicates the maximum load that the bearing can sustain for a specified number of rotations or operating hours without experiencing premature fatigue failure. It is expressed in terms of the calculated dynamic equivalent radial or axial load, which takes into account the actual load distribution within the bearing. The dynamic load rating is typically provided by the manufacturer and allows engineers to compare and select bearings based on their expected performance under dynamic operating conditions.

  • Static Load Rating:

The static load rating of a self-aligning bearing represents the maximum load that the bearing can sustain without permanent deformation or excessive stress when the bearing is stationary or subjected to very slow rotations. It is typically higher than the dynamic load rating. The static load rating is an important consideration for applications where the bearing may be subjected to prolonged static or slow-speed conditions, such as in machinery that operates with intermittent or intermittent rotational motion.

It is important to note that the load-carrying capacity and load ratings provided by manufacturers are based on standardized testing methods and assumptions about operating conditions. Actual load capacity can be influenced by factors such as temperature, lubrication, misalignment, and operating speed. Therefore, it is crucial to consider the specific application requirements and consult the manufacturer’s technical data and guidelines when selecting a self-aligning bearing to ensure its suitability and optimal performance.

China Best Sales Motorcycle Spare Part Cylindrical Rolling Bearings Self-Aligning Roller Bearing with Two Rows Balls   bearing driver kitChina Best Sales Motorcycle Spare Part Cylindrical Rolling Bearings Self-Aligning Roller Bearing with Two Rows Balls   bearing driver kit
editor by CX 2024-04-16

China Good quality Bearing Steel Self-Aligning Roller Bearing 23126 23128 23130 Ca Cc Cak Cck MB Ma E E1 Cage Spherical Roller Bearing Automotive Bearing bearing driver kit

Product Description

   Iron retainer                                                                             Copper retainer
   High strength/not easy to deformation/light                           Low noise/abrasion resistance/long service                                  weight/low price                                                                           life/good stability

Aligning roller bearings have 2 rows of rollers, mainly bear radial load, but also can withstand any direction of the axial load, has a high radial load capacity, especially suitable for heavy loads or vibration loads, but can not bear pure axial load, this kind of bearing outer ring raceway is spherical shape, so its aligning performance is good, can compensate for coaxial error

Various product models for you to choose, low friction resistance, high speed

It can be used on parts bearing radial loads or combined loads acting simultaneously in both radial and axial directions

It can also be used on parts that bear axial loads.

Selection of GCR15 bearing steel, high precision, bearing long service time, high ductility

With a large amount of inventory, timely delivery, customer receiving cycle is short, convenient for customers to use quickly

Parameter:

Product Name Self-aligning roller bearings
Brand Name  KSA
Material Gcr15
Precision Grade P0,P6,P5
Certification ISO 9001
Packeage Box /Carton/Wooden Box/Plastic Tube or Per buyers requirement
MOQ Depending On Moedl
Serice OEM

Sample Available
Payment TT or L/C or Western Union
Port HangZhou

Product Analysis

Detailed Photos

Company Profile

About us

Specialized production

ZheJiang Kangshi Precision Bearing Manufacturing Co., Ltd., located in Yandian Town Industrial Park, HangZhou City, ZheJiang Province, mainly produces zero deep groove ball bearings, 2 types of cylindrical roller bearings, 3 types of aligning roller bearings, 6 types of angular contact ball bearings, 7 types of tapered roller bearings, eight types of thrust ball bearings, thrust bearings, 9 types of thrust aligning roller bearings, outer spherical bearings, auto parts, Motorcycle parts and other rolling bearings. Our factory has strong professional technology, good production equipment and perfect testing means, can fully meet the various types, specifications, high precision and special use requirements of bearing products customized processing, the production process of the product according to the strict national standards of enterprise internal control standards for the implementation of full inspection and multi-project comprehensive inspection of factory products, Can ensure the quality of each set of factory bearing products to meet national standards. Kangshi bearing has always implemented national standards, market prices, and implemented the “three guarantees” principle for customers: To ensure high-quality quality, preferential prices, superior after-sales service! Welcome customers at home and abroad to consult and negotiate business, the company will continue to win the trust of more customers with good product quality and reputation.

        Our factory                         Quality assurance             Order management   
 

More than 15 years experience in product          Stable raw material procurement,               Good order tracking management,

manufacturing and sales                                      traceable quality assessment                     good delivery and shipment control

Our certificate

Scope of application

Application fields: paper making machinery, reducer, railway vehicle axle, rolling mill gear box bearing seat, rolling mill roller, crusher, vibrating screen, printing machinery, woodworking machinery, all kinds of industry reducer, vertical aligning bearing with seat, etc

FAQ

Q: What is the MOQ?
A: It depends on the bearing type. You can send inquiry or send e-mail for more information.
Q: How about the package?
A: Industrial packing in general condition (Plastic drums/boxes/industrial packaging + cartons + pallets). Accept  design package when OEM.
Q: How long is the delivery time?
A: It will take about 10 to 40 days, depends on the model and quantity.
Q:What are the advantages of your company’s services compared to other companies?
A: Factory direct supply, price advantage, 24 hours online timely reply, Provide customers with customs clearance 
     and quality of various documents, 100% after-sales service
Q:OEM POLICY
A:We can printing your brand (logo,artwork)on the bearings or laser engraving your brand on the bearings.
    We can custom your packaging according to your design All copyright own by clients and we  promised  don’t 
    disclose any info.
Q:How to contact us quickly?
A:Please send us an inquiry or message and leave your other contact information, such as phone number,
     account or account, we will contact you as soon as possible and provide the detailed information
    you need.

             Please feel free to contact us, if you have any other question

/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

Quality: High Quality
Inventory: Abundant
Major Market: Global
Samples:
US$ 2/Set
1 Set(Min.Order)

|

Order Sample

Customization:
Available

|

Customized Request

.shipping-cost-tm .tm-status-off{background: none;padding:0;color: #1470cc}

Shipping Cost:

Estimated freight per unit.







about shipping cost and estimated delivery time.
Payment Method:







 

Initial Payment



Full Payment
Currency: US$
Return&refunds: You can apply for a refund up to 30 days after receipt of the products.

self aligning bearing

Are there specific considerations for choosing self-aligning bearings in applications with challenging operating conditions or varying misalignment requirements?

Yes, there are specific considerations to take into account when choosing self-aligning bearings for applications with challenging operating conditions or varying misalignment requirements. Here’s a detailed explanation:

  • Operating Conditions:

When selecting self-aligning bearings for challenging operating conditions, it’s important to consider factors such as temperature, speed, load, and environmental conditions. High temperatures, extreme speeds, heavy loads, and harsh environments can all impact the performance and durability of the bearing. In such cases, it may be necessary to choose self-aligning bearings with special heat-resistant materials, high-speed capabilities, increased load-carrying capacity, or enhanced corrosion resistance. Additionally, proper lubrication selection and maintenance practices become crucial to ensure optimal performance and longevity of the bearings.

  • Misalignment Requirements:

Self-aligning bearings are specifically designed to accommodate misalignment between the shaft and the housing. However, different applications may have varying misalignment requirements. It’s important to consider the magnitude and type of misalignment that the bearing will experience. Some self-aligning bearings can accommodate larger misalignments, while others are designed for smaller or specific types of misalignments, such as angular or parallel misalignment. Understanding the misalignment characteristics of the application is essential to select the appropriate self-aligning bearings that can effectively handle the expected misalignment conditions.

  • Load Capacity and Dynamic Performance:

In applications with challenging operating conditions, it’s crucial to assess the load capacity and dynamic performance requirements of the self-aligning bearings. Heavy loads, shock loads, or vibrations can significantly affect the bearing’s performance and service life. It’s important to choose self-aligning bearings with adequate load-carrying capacity, high shock resistance, and robust construction to withstand the demanding conditions. Additionally, the dynamic performance of the bearing, including factors such as rotational speed, acceleration, and deceleration, should be carefully evaluated to ensure that the selected bearings can meet the application’s performance requirements.

  • Sealing and Contamination Prevention:

In challenging operating conditions, effective sealing and contamination prevention become crucial for self-aligning bearings. Dust, dirt, moisture, and other contaminants can significantly impact the bearing’s performance and service life. It’s important to select self-aligning bearings with appropriate sealing solutions, such as contact seals, non-contact seals, or hybrid seals, depending on the specific application requirements. These seals help prevent the ingress of contaminants and maintain the integrity of the bearing’s internal components, ensuring reliable operation even in harsh environments.

  • Lubrication and Maintenance:

Lubrication and maintenance practices are critical considerations for self-aligning bearings in challenging operating conditions. Proper lubrication selection, including the choice of lubricant type, viscosity, and replenishment frequency, is essential to ensure optimal bearing performance and minimize the risk of premature wear or failure. Additionally, adhering to appropriate maintenance practices, such as regular inspections, re-lubrication, and monitoring of operating conditions, can help identify any potential issues early on and prevent costly downtime or unexpected failures.

By considering these specific factors and requirements, engineers can choose the most suitable self-aligning bearings for applications with challenging operating conditions or varying misalignment requirements. Taking into account the unique demands of the application ensures optimal performance, durability, and reliability of the self-aligning bearings in even the most demanding environments.

self aligning bearing

Can you explain the installation and alignment considerations for self-aligning bearings?

Proper installation and alignment are crucial for the optimal performance and longevity of self-aligning bearings. Here’s a detailed explanation of the installation and alignment considerations:

  • Pre-Installation Preparation:

Prior to the installation of self-aligning bearings, it is essential to ensure a clean and suitable working environment. Here are some key considerations:

  • Cleanliness: The work area should be clean and free from dust, dirt, and contaminants to prevent the ingress of foreign particles during the installation process.
  • Tools and Equipment: Prepare the necessary tools and equipment required for the installation, including suitable lifting devices, torque wrenches, and lubrication apparatus.
  • Inspection: Thoroughly inspect the bearing and its components for any signs of damage or defects. Replace any worn or damaged parts before proceeding with the installation.
  • Lubrication: Apply the recommended lubricant to the bearing and ensure that it is properly distributed before installation. Lubrication helps reduce friction, prevent excessive wear, and facilitate smooth operation.
  • Mounting Considerations:

When mounting self-aligning bearings, it is important to follow certain guidelines to ensure proper fit and alignment:

  • Shaft and Housing Tolerances: Check the shaft and housing tolerances to ensure they comply with the specifications provided by the bearing manufacturer. Proper tolerances help achieve the correct fit and prevent excessive clearance or interference.
  • Shaft and Housing Preparation: Clean the shaft and housing surfaces and remove any burrs or rough edges that could interfere with the bearing’s seating. Ensure that the shaft and housing are machined to the recommended tolerances and finishes.
  • Mounting Method: There are various methods for mounting self-aligning bearings, including press fitting, thermal expansion, and hydraulic mounting. Follow the manufacturer’s instructions and recommended mounting method to ensure a secure and accurate fit.
  • Sealing: If the self-aligning bearing has integral seals or shields, ensure that they are correctly positioned and aligned during installation. Proper sealing helps protect the bearing against contaminants and extends its service life.
  • Tightening: When tightening the bearing onto the shaft or in the housing, use the recommended torque values provided by the manufacturer. Over-tightening can lead to excessive preload or damage, while under-tightening can result in insufficient seating and compromised performance.
  • Alignment Considerations:

Proper alignment is crucial for self-aligning bearings to function optimally. Here are some alignment considerations:

  • Angular Misalignment: Self-aligning bearings can accommodate angular misalignment to a certain degree. However, it is important to keep the misalignment within the manufacturer’s specified limits to prevent excessive stress and premature wear.
  • Shaft Deflection: Consider the potential shaft deflection that may occur during operation and ensure that the self-aligning bearing can handle the expected deflection without exceeding its capacity. This may involve selecting a bearing with appropriate load-carrying capacity and considering additional support or stabilization measures.
  • Alignment Verification: After installation, verify the alignment of the self-aligning bearing by measuring the axial and radial runout using appropriate alignment tools. Adjust the positioning if necessary to achieve the desired alignment within the specified tolerances.

By following these installation and alignment considerations, you can ensure the proper fit, alignment, and performance of self-aligning bearings. Adhering to the manufacturer’s guidelines and best practices helps maximize the lifespan and reliability of the bearings in various applications.

self aligning bearing

What are the common types of self-aligning bearings, such as spherical or barrel roller bearings?

There are several common types of self-aligning bearings, each offering unique features and advantages. Here’s a detailed explanation of some of the common types:

  • Spherical Roller Bearings:

Spherical roller bearings are one of the most common types of self-aligning bearings. They have a spherical outer ring raceway and two rows of barrel-shaped rollers positioned between the inner and outer rings. This design allows for the accommodation of misalignment and provides high radial load-carrying capacity. Spherical roller bearings are commonly used in heavy-duty applications, such as mining equipment, paper mills, and crushers.

  • Barrel Roller Bearings:

Barrel roller bearings, also known as toroidal roller bearings, have a barrel-shaped roller arrangement with a concave outer ring raceway and a convex inner ring raceway. This design enables the bearing to accommodate misalignment and axial displacement. Barrel roller bearings are suitable for applications with high radial loads and moderate axial loads, such as in conveyor systems, printing presses, and industrial gearboxes.

  • Self-Aligning Ball Bearings:

Self-aligning ball bearings consist of an inner ring with two rows of balls and an outer ring with a spherical raceway. The design allows for misalignment compensation and is particularly suited for applications with low to moderate radial loads and moderate axial loads. Self-aligning ball bearings are commonly used in electric motors, pumps, and automotive applications.

  • Self-Aligning Thrust Roller Bearings:

Self-aligning thrust roller bearings are designed to accommodate misalignment in applications with axial loads. They have a spherical rolling element between the shaft washer and the housing washer, allowing for misalignment compensation. These bearings are commonly used in applications such as screw conveyors, heavy machinery, and marine propulsion systems.

  • Adapter Sleeve Bearings:

Adapter sleeve bearings are a type of self-aligning bearing that incorporates an adapter sleeve, which facilitates easy mounting and dismounting of the bearing. They are commonly used in applications where frequent bearing replacement or adjustment is required. Adapter sleeve bearings are often employed in conveyor systems, agricultural machinery, and textile equipment.

These are just a few examples of common types of self-aligning bearings. Other variations and specialized designs exist to suit specific application requirements. It’s important to consider factors such as load capacity, operating conditions, and dimensional constraints when selecting the appropriate self-aligning bearing for a particular application.

China Good quality Bearing Steel Self-Aligning Roller Bearing 23126 23128 23130 Ca Cc Cak Cck MB Ma E E1 Cage Spherical Roller Bearing Automotive Bearing   bearing driver kitChina Good quality Bearing Steel Self-Aligning Roller Bearing 23126 23128 23130 Ca Cc Cak Cck MB Ma E E1 Cage Spherical Roller Bearing Automotive Bearing   bearing driver kit
editor by CX 2024-04-12

China Good quality Self-Aligning Cc Series Industrial Spherical Roller Bearing for Textile Machine bearing driver kit

Product Description

NSK CZPT CZPT CZPT CZPT Wheel Bearing Spherical Roller Bearing Taper Roller Bearing Cylindrical
Roller Bearing Deep Groove Ball Bearing

About Spherical Roller Bearing
1): CZPT to accommodate misalignment
2): Suitable for high axial and some radial loads
3): Relatively high speed ratings
4): type : YM (CA,CAM,EAS ) ,YMB ,MB,CJ(CC CD RH) ,E (E1)
5): Application examples: Heavy vertical shafts, injection moulding machines, etc.
 

New Item Old Item Structure Specifications(dxDxT)mm Weight/kg
22207 3507 MB/CA/CC/EK/CK/CMW33 35x72x23 0.43
22208 3508 MB/CA/CC/E/K/CK/CMW33 40X80X23 0.55
22209 3509 MB/CA/CC/E/K/CK/CMW33 45X85X23 0.59
22210 3510 MB/CA/CC/E/K/CK/CMW33 50X90X23 0.64
22211 3511 MB/CA/CC/E/K/CK/CMW33 55X100X25 0.88
22212 3512 MB/CA/CC/E/K/CK/CMW33 60X110X28 1.19
22213 3513 MB/CA/CC/E/K/CK/CMW33 65X120X31 1.6
22214 3514 MB/CA/CC/E/K/CK/CMW33 70X125X31 1.68
22215 3515 MB/CA/CC/E/K/CK/CMW33 75X130X31 1.75
22216 3516 MB/CA/CC/E/K/CK/CMW33 80X140X33 2.12
22217 3517 MB/CA/CC/E/K/CK/CMW33 85X150X36 2.79
22218 3518 MB/CA/CC/E/K/CK/CMW33 90X160X40 3.78
22219 3519 MB/CA/CC/E/K/CK/CMW33 95X170X43 4.31
22220 3520 MB/CA/CC/E/K/CK/CMW33 100X180X46 5.06
22222 3522 MB/CA/CC/E/K/CK/CMW33 110X200X53 7.4
22224 3524 MB/CA/CC/E/K/CK/CMW33 120X215X58 9.267
22226 3526 MB/CA/CC/E/K/CK/CMW33 130X230X64 11.5
22228 3528 MB/CA/CC/E/K/CK/CMW33 140X250X68 14.5
22230 3530 MB/CA/CC/E/K/CK/CMW33 150X270X73 18.4
22232 3532 MB/CA/CC/E/K/CK/CMW33 160X260X80 22.3
22234 3534 MB/CA/CC/E/K/CK/CMW33 170X310X86 28.7
22236 3536 MB/CA/CC/E/K/CK/CMW33 180X320X86 30.5
22238 3538 MB/CA/CC/E/K/CK/CMW33 190X320X92 35.55
22240 3540 MB/CA/CC/E/K/CK/CMW33 200X360X98 44.7
22244 3544 MB/CA/CC/E/K/CK/CMW33 220X400X108 63
22248 3548 MB/CA/CC/E/K/CK/CMW33 240X440X120 83.2
22252 3552 MB/CA/CC/E/K/CK/CMW33 260X480X130 105
22256 3556 MB/CA/CC/E/K/CK/CMW33 280X500X130 126
22260 3560 MB/CA/CC/E/K/CK/CMW33 300X540X140 143
22306 3606 MB/CA/CC/E/K/CK/CMW33 30x70x22 0.37
22307 3607 MB/CA/CC/E/K/CK/CMW33 35x80x31 0.75
22308 3608 MB/CA/CC/E/K/CK/CMW33 40x90x33 1.07
22309 3609 MB/CA/CC/E/K/CK/CMW33 45x90x33 1.4
22310 3610 MB/CA/CC/E/K/CK/CMW33 50x110x40 1.83
22311 3611 MB/CA/CC/E/K/CK/CMW33 55x120x43 2.4
22312 3612 MB/CA/CC/E/K/CK/CMW33 60x130x46 2.88
22313 3613 MB/CA/CC/E/K/CK/CMW33 65x140x48 3.52
22314 3614 MB/CA/CC/E/K/CK/CMW33 70x150x51 4.21
22315 3615 MB/CA/CC/E/K/CK/CMW33 75x160x55 5.47
22316 3616 MB/CA/CC/E/K/CK/CMW33 80x170x58 6.19
22317 3617 MB/CA/CC/E/K/CK/CMW33 85x180x60 7.5
22318 3618 MB/CA/CC/E/K/CK/CMW33 90x190x64 8.96
22319 3619 MB/CA/CC/E/K/CK/CMW33 95x200x67 9.93
22320 3620 MB/CA/CC/E/K/CK/CMW33 100x215x73 13
22322 3622 MB/CA/CC/E/K/CK/CMW33 110x240x80 17.95
22324 3624 MB/CA/CC/E/K/CK/CMW33 120x246x80 22.4
22326 3626 MB/CA/CC/E/K/CK/CMW33 130x280x93 28.2
22328 3628 MB/CA/CC/E/K/CK/CMW33 140x300x102 35.12
22330 3630 MB/CA/CC/E/K/CK/CMW33 150x320x108 43.7
22332 3632 MB/CA/CC/E/K/CK/CMW33 160x340x114 52.2
22334 3634 MB/CA/CC/E/K/CK/CMW33 170x360x120 60.7

Our packing: 
* Industrial pakage+outer carton+pallets
* sigle box+outer carton+pallets
* Tube package+middle box+outer carton+pallets
* According to your requirments

We have been engaged in foreign trade for more than 6 years and are well-known enterprises in ZheJiang
Province. The fixed assets of the machine are more than 2 million US dollars, and the annual foreign trade
Sales volume exceeds 2 million US dollars. 
We have extensive cooperation with countries in Asia, Europe, and the Americas. Including Russia, Ukraine, 
Elarus, Kazakhstan, Uzbekistan, Tajikistan, Spain, Mexico, India, Pakistan, Turkey, Vietnam and other industrial
Areas.

SAMPLES
1. Samples quantity: 1-10 PCS are available. 
2. Free samples: It depends on the Model No., material and quantity. Some of the bearings samples need client to pay samples charge and shipping cost. 
3. It’s better to start your order with Trade Assurance to get full protection for your samples order. 

CUSTOMIZED
The customized LOGO or drawing is acceptable for us. 

MOQ
1. MOQ: 10 PCS mix different standard bearings. 
2. MOQ: 3000 PCS customized your brand bearings. 

OEM POLICY
1. We can printing your brand (logo, artwork)on the shield or laser engraving your brand on the shield. 
2. We can custom your packaging according to your design
3. All copyright own by clients and we promised don’t disclose any info. 

SUPORT
Please visit our bearings website, we strongly encourge that you can communicate with us through email, thanks! 

We have all kinds of bearings, just tell me your item number and quantity, best price will be offered to you soon
The material of the bearings, precision rating, seals type, OEM service, etc, all of them we can make according to your requirement. 

/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

Feature: Best Price, High Speed, Long Life
OEM: Available
Hardness: 59-63HRC
Samples:
US$ 10/Piece
1 Piece(Min.Order)

|

Order Sample

Customization:
Available

|

Customized Request

.shipping-cost-tm .tm-status-off{background: none;padding:0;color: #1470cc}

Shipping Cost:

Estimated freight per unit.







about shipping cost and estimated delivery time.
Payment Method:







 

Initial Payment



Full Payment
Currency: US$
Return&refunds: You can apply for a refund up to 30 days after receipt of the products.

self aligning bearing

How do innovations and advancements in self-aligning bearing technology impact their use?

Advancements and innovations in self-aligning bearing technology have a significant impact on their use in various industries. Here’s a detailed explanation:

  • Improved Performance:

Innovations in self-aligning bearing technology often result in improved performance characteristics. These advancements can include:

  • Load Capacity: New bearing designs and materials can enhance the load-carrying capacity of self-aligning bearings, allowing them to withstand higher loads or operate under more demanding conditions.
  • Speed Capability: Advancements in bearing manufacturing techniques and materials can increase the maximum rotational speed at which self-aligning bearings can operate effectively, enabling their use in high-speed applications.
  • Friction Reduction: Innovations in bearing design, lubrication, and surface treatments contribute to reducing friction and energy losses, resulting in improved efficiency and reduced operating costs.
  • Sealing and Contamination Resistance: New sealing technologies and materials can enhance the sealing performance of self-aligning bearings, providing better protection against contaminants, moisture, and harsh environmental conditions.
  • Temperature and Corrosion Resistance: Advances in bearing materials and coatings enable self-aligning bearings to withstand extreme temperatures, aggressive chemicals, and corrosive environments, expanding their range of applications.
  • Extended Service Life:

Innovations in self-aligning bearing technology often result in improved durability and longevity. These advancements can include:

  • Materials: The development of new bearing materials, such as advanced steels, ceramics, or composites, can significantly enhance the bearing’s resistance to wear, fatigue, and surface damage, leading to extended service life.
  • Lubrication: Advancements in lubrication technologies, such as the use of solid lubricants or advanced grease formulations, can provide better film formation, reduce friction, and minimize wear, thereby increasing the bearing’s operating life.
  • Surface Treatments: Innovative surface treatments, such as coatings or finishes, can improve the bearing’s resistance to corrosion, wear, and fretting, contributing to longer service intervals and reduced maintenance requirements.
  • Condition Monitoring: The integration of sensor technologies and data analytics in self-aligning bearings enables real-time monitoring of operating conditions, allowing for proactive maintenance and early detection of potential failures, thus maximizing the bearing’s service life.
  • Application Expansion:

Advancements in self-aligning bearing technology often lead to an expansion of their application range. These advancements can include:

  • New Industries: Innovations in self-aligning bearing technology can enable their use in industries or applications where they were previously not feasible. This opens up opportunities in emerging sectors, such as renewable energy, electric vehicles, robotics, or medical devices.
  • Challenging Environments: Improved performance characteristics, such as enhanced sealing, temperature resistance, or contamination resistance, allow self-aligning bearings to be deployed in challenging environments, including offshore installations, high-temperature processes, or chemically aggressive applications.
  • Specialized Applications: Advancements in self-aligning bearing technology can lead to the development of specialized bearing variants tailored for specific applications, such as high-speed machining, precision equipment, or demanding industrial automation systems.

Overall, innovations and advancements in self-aligning bearing technology bring about enhanced performance, extended service life, and expanded application possibilities. These advancements drive improvements in industrial productivity, reliability, and efficiency, making self-aligning bearings a valuable component in a wide range of industries and applications.

self aligning bearing

Can you explain the installation and alignment considerations for self-aligning bearings?

Proper installation and alignment are crucial for the optimal performance and longevity of self-aligning bearings. Here’s a detailed explanation of the installation and alignment considerations:

  • Pre-Installation Preparation:

Prior to the installation of self-aligning bearings, it is essential to ensure a clean and suitable working environment. Here are some key considerations:

  • Cleanliness: The work area should be clean and free from dust, dirt, and contaminants to prevent the ingress of foreign particles during the installation process.
  • Tools and Equipment: Prepare the necessary tools and equipment required for the installation, including suitable lifting devices, torque wrenches, and lubrication apparatus.
  • Inspection: Thoroughly inspect the bearing and its components for any signs of damage or defects. Replace any worn or damaged parts before proceeding with the installation.
  • Lubrication: Apply the recommended lubricant to the bearing and ensure that it is properly distributed before installation. Lubrication helps reduce friction, prevent excessive wear, and facilitate smooth operation.
  • Mounting Considerations:

When mounting self-aligning bearings, it is important to follow certain guidelines to ensure proper fit and alignment:

  • Shaft and Housing Tolerances: Check the shaft and housing tolerances to ensure they comply with the specifications provided by the bearing manufacturer. Proper tolerances help achieve the correct fit and prevent excessive clearance or interference.
  • Shaft and Housing Preparation: Clean the shaft and housing surfaces and remove any burrs or rough edges that could interfere with the bearing’s seating. Ensure that the shaft and housing are machined to the recommended tolerances and finishes.
  • Mounting Method: There are various methods for mounting self-aligning bearings, including press fitting, thermal expansion, and hydraulic mounting. Follow the manufacturer’s instructions and recommended mounting method to ensure a secure and accurate fit.
  • Sealing: If the self-aligning bearing has integral seals or shields, ensure that they are correctly positioned and aligned during installation. Proper sealing helps protect the bearing against contaminants and extends its service life.
  • Tightening: When tightening the bearing onto the shaft or in the housing, use the recommended torque values provided by the manufacturer. Over-tightening can lead to excessive preload or damage, while under-tightening can result in insufficient seating and compromised performance.
  • Alignment Considerations:

Proper alignment is crucial for self-aligning bearings to function optimally. Here are some alignment considerations:

  • Angular Misalignment: Self-aligning bearings can accommodate angular misalignment to a certain degree. However, it is important to keep the misalignment within the manufacturer’s specified limits to prevent excessive stress and premature wear.
  • Shaft Deflection: Consider the potential shaft deflection that may occur during operation and ensure that the self-aligning bearing can handle the expected deflection without exceeding its capacity. This may involve selecting a bearing with appropriate load-carrying capacity and considering additional support or stabilization measures.
  • Alignment Verification: After installation, verify the alignment of the self-aligning bearing by measuring the axial and radial runout using appropriate alignment tools. Adjust the positioning if necessary to achieve the desired alignment within the specified tolerances.

By following these installation and alignment considerations, you can ensure the proper fit, alignment, and performance of self-aligning bearings. Adhering to the manufacturer’s guidelines and best practices helps maximize the lifespan and reliability of the bearings in various applications.

self aligning bearing

What are the common types of self-aligning bearings, such as spherical or barrel roller bearings?

There are several common types of self-aligning bearings, each offering unique features and advantages. Here’s a detailed explanation of some of the common types:

  • Spherical Roller Bearings:

Spherical roller bearings are one of the most common types of self-aligning bearings. They have a spherical outer ring raceway and two rows of barrel-shaped rollers positioned between the inner and outer rings. This design allows for the accommodation of misalignment and provides high radial load-carrying capacity. Spherical roller bearings are commonly used in heavy-duty applications, such as mining equipment, paper mills, and crushers.

  • Barrel Roller Bearings:

Barrel roller bearings, also known as toroidal roller bearings, have a barrel-shaped roller arrangement with a concave outer ring raceway and a convex inner ring raceway. This design enables the bearing to accommodate misalignment and axial displacement. Barrel roller bearings are suitable for applications with high radial loads and moderate axial loads, such as in conveyor systems, printing presses, and industrial gearboxes.

  • Self-Aligning Ball Bearings:

Self-aligning ball bearings consist of an inner ring with two rows of balls and an outer ring with a spherical raceway. The design allows for misalignment compensation and is particularly suited for applications with low to moderate radial loads and moderate axial loads. Self-aligning ball bearings are commonly used in electric motors, pumps, and automotive applications.

  • Self-Aligning Thrust Roller Bearings:

Self-aligning thrust roller bearings are designed to accommodate misalignment in applications with axial loads. They have a spherical rolling element between the shaft washer and the housing washer, allowing for misalignment compensation. These bearings are commonly used in applications such as screw conveyors, heavy machinery, and marine propulsion systems.

  • Adapter Sleeve Bearings:

Adapter sleeve bearings are a type of self-aligning bearing that incorporates an adapter sleeve, which facilitates easy mounting and dismounting of the bearing. They are commonly used in applications where frequent bearing replacement or adjustment is required. Adapter sleeve bearings are often employed in conveyor systems, agricultural machinery, and textile equipment.

These are just a few examples of common types of self-aligning bearings. Other variations and specialized designs exist to suit specific application requirements. It’s important to consider factors such as load capacity, operating conditions, and dimensional constraints when selecting the appropriate self-aligning bearing for a particular application.

China Good quality Self-Aligning Cc Series Industrial Spherical Roller Bearing for Textile Machine   bearing driver kitChina Good quality Self-Aligning Cc Series Industrial Spherical Roller Bearing for Textile Machine   bearing driver kit
editor by CX 2024-04-10

China Professional 1203 1203K 17*40* 12 Steel Cage Self-Aligning Ball Bearings bearing driver kit

Product Description

1203 1203K 17*40* 12 Steel Cage Self-Aligning Ball Bearings

self-aligning bearing :

1)Self-Aligning Ball Bearing has 2 kinds of structure:cylindrical or tapered hole, the cage material is steel plate,  brass,etc..Its characteristics is spherical raceway, with the natureof mind, can automatically adjustable to compensate concentration and shaft deflection caused by error, but the inner and outer rings relative inclination shall not be more than 3 degrees.

2)Self-Aligning Ball Bearing can bear larger radial load,but also can withstand axial load. This kind of bearing outer ring raceway is spherical shape, so it is self-aligning performance,when the axial force bending or tilt the inner center line and center of the outer ring line relative slope up to a maximum of 1 to 2.5degrees bearing can still work.

3)Taper bore of 1:1 2 or 1:30. In order to strengthen the lubrication performance of the bearing, the bearing outer ring of the oil groove and the processing of 3 oil hole.

4)Self-Aligning Ball Bearing is applied to withstand heavy load and impact load, precision instruments, low noise motor,
automobile,motorcycle, metallurgy, rolling mill, mine, oil, paper, cement, sugar industry,general machinery and so on.

Other model number we are supply

Bearing No. Main size Rmin
OPEN, 2RS OPEN, 2RS d D b
1200 1200K 10 30 9 0.6
1201 1201K 12 32 10 0.6
1202 1202K 15 35 11 0.6
1203 1203K 17 40 12 0.6
1204 1204K 20 47 14 1
1205 1205K 25 52 15 1
1206 1206K 30 62 16 1
1207 1207K 35 72 17 1.1
1208 1208K 40 80 18 1.1
1209 1209K 45 85 19 1.1
1210 1210K 50 90 20 1.1
1211 1211K 55 100 21 1.5
1212 1212K 60 110 22 1.5
1213 1213K 65 120 23 1.5
1214 1214K 70 125 24 1.5
1215 1215K 75 130 25 1.5
1216 1216K 80 140 26 2
1217 1217K 85 150 28 2
1218 1218K 90 160 30 2
1219 1219K 95 170 32 2.1
1220 1220K 100 180 34 2.1
1221 1221K 105 190 36 2.1
1222 1222K 110 200 38 2.1
1300 1300K 10 35 11 0.6
1301 1301K 12 37 12 1
1302 1302K 15 42 13 1
1303 1303K 17 47 14 1
1304 1304K 20 52 15 1.1
1305 1305K 25 62 17 1.1
1306 1306K 30 72 19 1.1
1307 1307K 35 80 21 1.5

  /* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

Aligning: Aligning Bearing
Separated: Unseparated
Rows Number: Double
Load Direction: Radial Bearing
Material: Bearing Steel
Transport Package: as Per Client′s Requirement
Customization:
Available

|

Customized Request

self aligning bearing

What is the role of cage design and materials in self-aligning bearing performance and durability?

The cage design and materials used in self-aligning bearings play a crucial role in determining their performance and durability. Here’s a detailed explanation:

  • Guiding and Retaining Rolling Elements:

The primary function of the cage in a self-aligning bearing is to guide and retain the rolling elements, such as balls or rollers, in their proper positions. The cage prevents the rolling elements from contacting and rubbing against each other, ensuring smooth and controlled movement within the bearing. By providing precise spacing and alignment, the cage maintains the integrity of the bearing assembly and optimizes load distribution. It also minimizes the risk of damage or premature wear caused by improper positioning or collision of the rolling elements.

  • Reducing Friction and Heat Generation:

The cage design and materials can significantly impact the friction and heat generation within the self-aligning bearing. An efficient cage design ensures proper lubrication distribution by allowing the lubricant to reach all the critical contact points between the rolling elements and raceways. This reduces friction and minimizes the associated heat generation, leading to improved overall bearing efficiency and reduced energy losses. Additionally, the choice of materials for the cage should consider factors such as low friction coefficients and good thermal conductivity to further optimize performance.

  • Maintaining Alignment and Stability:

Self-aligning bearings are designed to accommodate misalignment between the shaft and the housing. The cage plays a vital role in maintaining the alignment and stability of the rolling elements, ensuring that they stay properly seated and aligned during operation. A well-designed cage provides sufficient space and support for the rolling elements to adjust and align themselves, even under dynamic conditions or when subjected to external forces. This enables the self-aligning bearing to continue operating smoothly and efficiently, minimizing the risk of excessive stress, wear, or premature failure.

  • Enhancing Durability and Service Life:

The cage design and materials significantly impact the durability and service life of self-aligning bearings. A robust and durable cage is essential for withstanding the loads, impact forces, and vibrations that can occur during operation. The cage should be resistant to wear, fatigue, and corrosion to ensure long-term performance and reliability. By selecting appropriate cage materials, such as high-strength steels, thermoplastics, or engineered polymers, manufacturers can enhance the durability and service life of self-aligning bearings in various operating conditions.

  • Reducing Weight and Inertia:

The cage design and materials also influence the weight and inertia of the self-aligning bearing. Lighter cage materials, such as certain polymers or composite materials, can help reduce the overall weight of the bearing assembly. This has several benefits, including lower energy consumption, reduced centrifugal forces, and improved dynamic performance. By minimizing the weight and inertia of the cage, self-aligning bearings can operate at higher speeds, exhibit improved response times, and potentially achieve higher levels of performance and efficiency.

Overall, the cage design and materials used in self-aligning bearings are critical factors in determining their performance, durability, and overall efficiency. A well-designed cage facilitates proper guidance and retention of the rolling elements, reduces friction and heat generation, maintains alignment and stability, enhances durability and service life, and contributes to overall weight optimization. By considering the specific application requirements and selecting the appropriate cage design and materials, engineers can optimize the performance and durability of self-aligning bearings in a wide range of industrial applications.

self aligning bearing

How do self-aligning bearings perform in applications with varying loads and misalignment challenges?

Self-aligning bearings are specifically designed to perform exceptionally well in applications with varying loads and misalignment challenges. Here’s an in-depth explanation of their performance characteristics:

  • Misalignment Compensation:

Self-aligning bearings are capable of accommodating various types of misalignment, including angular misalignment and shaft deflection. They feature a design that incorporates two rows of rolling elements, such as balls or rollers, and a spherical outer ring raceway. This design allows the bearing to self-align, adapting to misalignment caused by factors such as shaft deflection, mounting errors, thermal expansion, and vibrations. Self-aligning bearings can handle misalignment within certain limits, maintaining proper alignment between the mating components and minimizing additional stresses on the bearing.

  • Load-Carrying Capacity:

Self-aligning bearings are engineered to handle high loads, both radial and axial. They have a robust construction with larger rolling elements and increased contact area, enabling them to distribute the load more effectively. This enhanced load-carrying capacity makes self-aligning bearings suitable for applications where varying loads are encountered. Whether it’s fluctuating radial loads, axial loads, or a combination of both, self-aligning bearings can handle the dynamic forces and provide reliable performance.

  • Flexibility and Versatility:

Self-aligning bearings offer flexibility and versatility in applications with varying loads and misalignment challenges. They can operate in conditions where shafts are not perfectly aligned or where there are slight shaft movements. This flexibility allows for easier installation and alignment adjustments, reducing the time and effort required for precise positioning of the bearing. Additionally, self-aligning bearings are available in different designs and configurations, including ball bearings and roller bearings, providing options to match specific application requirements.

  • Reduced Friction and Heat Generation:

Self-aligning bearings are designed to minimize friction and heat generation during operation. The rolling elements and raceways are precisely engineered to reduce contact stresses and optimize the distribution of forces. This results in lower friction levels and reduced heat buildup, enhancing the overall efficiency and reliability of the bearing in applications where varying loads and misalignment challenges are present.

  • Extended Service Life:

Due to their ability to accommodate misalignment and handle varying loads, self-aligning bearings contribute to an extended service life of the machinery. By reducing the stresses and excessive forces on the bearing and its surrounding components, self-aligning bearings help minimize wear, prevent premature failure, and increase the overall durability of the equipment.

In summary, self-aligning bearings excel in applications with varying loads and misalignment challenges. Their ability to compensate for misalignment, handle high loads, provide flexibility in installation, and reduce friction and heat generation makes them well-suited for industries such as mining, construction, paper manufacturing, steel production, and many others where these challenges are prevalent.

self aligning bearing

What are the common types of self-aligning bearings, such as spherical or barrel roller bearings?

There are several common types of self-aligning bearings, each offering unique features and advantages. Here’s a detailed explanation of some of the common types:

  • Spherical Roller Bearings:

Spherical roller bearings are one of the most common types of self-aligning bearings. They have a spherical outer ring raceway and two rows of barrel-shaped rollers positioned between the inner and outer rings. This design allows for the accommodation of misalignment and provides high radial load-carrying capacity. Spherical roller bearings are commonly used in heavy-duty applications, such as mining equipment, paper mills, and crushers.

  • Barrel Roller Bearings:

Barrel roller bearings, also known as toroidal roller bearings, have a barrel-shaped roller arrangement with a concave outer ring raceway and a convex inner ring raceway. This design enables the bearing to accommodate misalignment and axial displacement. Barrel roller bearings are suitable for applications with high radial loads and moderate axial loads, such as in conveyor systems, printing presses, and industrial gearboxes.

  • Self-Aligning Ball Bearings:

Self-aligning ball bearings consist of an inner ring with two rows of balls and an outer ring with a spherical raceway. The design allows for misalignment compensation and is particularly suited for applications with low to moderate radial loads and moderate axial loads. Self-aligning ball bearings are commonly used in electric motors, pumps, and automotive applications.

  • Self-Aligning Thrust Roller Bearings:

Self-aligning thrust roller bearings are designed to accommodate misalignment in applications with axial loads. They have a spherical rolling element between the shaft washer and the housing washer, allowing for misalignment compensation. These bearings are commonly used in applications such as screw conveyors, heavy machinery, and marine propulsion systems.

  • Adapter Sleeve Bearings:

Adapter sleeve bearings are a type of self-aligning bearing that incorporates an adapter sleeve, which facilitates easy mounting and dismounting of the bearing. They are commonly used in applications where frequent bearing replacement or adjustment is required. Adapter sleeve bearings are often employed in conveyor systems, agricultural machinery, and textile equipment.

These are just a few examples of common types of self-aligning bearings. Other variations and specialized designs exist to suit specific application requirements. It’s important to consider factors such as load capacity, operating conditions, and dimensional constraints when selecting the appropriate self-aligning bearing for a particular application.

China Professional 1203 1203K 17*40* 12 Steel Cage Self-Aligning Ball Bearings   bearing driver kitChina Professional 1203 1203K 17*40* 12 Steel Cage Self-Aligning Ball Bearings   bearing driver kit
editor by CX 2024-03-28

China Good quality CZPT CZPT CZPT CZPT Self-Aligning Roller Bearing Printing Machinery Parts Bearing Spherical Roller Bearing Distributor bearing driver kit

Product Description

NSK CZPT CZPT CZPT CZPT Wheel Bearing Spherical Roller Bearing Taper Roller Bearing Cylindrical
Roller Bearing Deep Groove Ball Bearing

About Spherical Roller Bearing
1): CZPT to accommodate misalignment
2): Suitable for high axial and some radial loads
3): Relatively high speed ratings
4): Type: YM (CA, CAM, EAS ), YMB, MB, CJ(CC CD RH), E (E1)
5): Application examples: Heavy vertical shafts, injection moulding machines, etc. 

Bearing No. 

Dimensions (mm)

Basic load rating Limiting speed(r/min) Weight (kg)

Cylindrical Bore

Taper Bore

D

D

B

Rmin

Cr

Cor

Grease

Oil

22 Series

22208CC

22208CCK

40

80

23

1.1

77.0

88.5

5000

6300

0.524

22209CC

22209CCK

45

85

23

1.1

80.5

95.2

4500

6000

0.571

22210CC

22210CCK

50

90

23

1.1

83.8

102.0

4300

5300

0.614

22211CC

22211CCK

55

100

25

1.5

102.0

125.0

3800

5000

0.847

22212CC

22212CCK

60

110

28

1.5

122.0

155.0

3600

4500

1.150

22213CC

22213CCK

65

120

31

1.5

150.0

195.0

3200

4000

1.540

22214CC

22214CCK

70

125

31

1.5

150.0

195.0

3000

3800

1.600

22215CC

22215CCK

75

730

31

1.5

162.0

215.0

3000

3800

1.690

22216CC

22216CCK

80

140

33

2.0

175.0

235.0

2800

3400

2.130

22217CC

22217CCK

85

150

36

2.0

212…0

282.0

2600

3200

2.670

22218CC

22218CCK

90

160

40

2.0

250.0

338.0

2400

3000

3.380

23 Series 

 

22308CC

22308CCK

40

90

33

1.5

120.0

138.0

4500

6000

1.571

22309CC

22309CCK

45

100

36

1.5

142.0

170.0

4000

5300

1.370

22310CC

22310CCK

50

110

40

2.0

178.0

212.0

3800

4800

1.790

22311CC

22311CCK

55

120

43

2.0

210.0

252.0

3400

4300

2.310

22312CC

22312CCK

60

130

46

2.1

242.0

292.0

3200

4000

2.880

22313CC

22313CCK

65

140

48

2.1

265.0

320.0

3000

3800

3.470

22314CC

22314CCK

70

150

51

2.1

312.0

395.0

2800

3400

4.340

22315CC

22315CCK

75

160

55

2.1

348.0

448.0

2600

3200

5.280

Our packing: 
* Industrial pakage+outer carton+pallets
* sigle box+outer carton+pallets
* Tube package+middle box+outer carton+pallets
* According to your requirments

We have been engaged in foreign trade for more than 6 years and are well-known enterprises in ZheJiang
Province. The fixed assets of the machine are more than 2 million US dollars, and the annual foreign trade
Sales volume exceeds 2 million US dollars. 
We have extensive cooperation with countries in Asia, Europe, and the Americas. Including Russia, Ukraine, 
Elarus, Kazakhstan, Uzbekistan, Tajikistan, Spain, Mexico, India, Pakistan, Turkey, Vietnam and other industrial
Areas.

SAMPLES
1. Samples quantity: 1-10 PCS are available. 
2. Free samples: It depends on the Model No., material and quantity. Some of the bearings samples need client to pay samples charge and shipping cost. 
3. It’s better to start your order with Trade Assurance to get full protection for your samples order. 

CUSTOMIZED
The customized LOGO or drawing is acceptable for us. 

MOQ
1. MOQ: 10 PCS mix different standard bearings. 
2. MOQ: 3000 PCS customized your brand bearings. 

OEM POLICY
1. We can printing your brand (logo, artwork)on the shield or laser engraving your brand on the shield. 
2. We can custom your packaging according to your design
3. All copyright own by clients and we promised don’t disclose any info. 

SUPORT
Please visit our bearings website, we strongly encourge that you can communicate with us through email, thanks! 

We have all kinds of bearings, just tell me your item number and quantity, best price will be offered to you soon
The material of the bearings, precision rating, seals type, OEM service, etc, all of them we can make according to your requirement. 

/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

Feature: Best Price, High Speed, Long Life
OEM: Available
Hardness: 59-63HRC
Samples:
US$ 10/Piece
1 Piece(Min.Order)

|

Order Sample

Customization:
Available

|

Customized Request

.shipping-cost-tm .tm-status-off{background: none;padding:0;color: #1470cc}

Shipping Cost:

Estimated freight per unit.







about shipping cost and estimated delivery time.
Payment Method:







 

Initial Payment



Full Payment
Currency: US$
Return&refunds: You can apply for a refund up to 30 days after receipt of the products.

self aligning bearing

How do self-aligning bearings enhance the overall efficiency and functionality of machinery and equipment?

Self-aligning bearings play a crucial role in enhancing the overall efficiency and functionality of machinery and equipment. Here’s a detailed explanation:

  • Compensation for Misalignment:

One of the key benefits of self-aligning bearings is their ability to compensate for misalignment between the shaft and the housing. Misalignment can occur due to various factors such as shaft deflection, thermal expansion, or mounting errors. Self-aligning bearings have the capability to accommodate angular misalignment, axial displacement, and shaft deflection, ensuring smooth operation even in challenging conditions. By accommodating misalignment, self-aligning bearings minimize stress and wear on other components, reducing the risk of premature failure and improving overall machinery efficiency.

  • Reduced Friction and Energy Consumption:

Self-aligning bearings are designed to operate with low friction, which helps to reduce energy consumption within the machinery or equipment. The rolling elements and raceways of self-aligning bearings are precisely engineered to minimize contact friction. This reduced friction results in lower power losses, allowing the machinery to operate more efficiently and potentially leading to energy savings.

  • Increased Reliability and Service Life:

Self-aligning bearings contribute to the overall reliability and service life of machinery and equipment. By accommodating misalignment and reducing friction, they help to distribute loads evenly, minimize stress concentrations, and prevent premature wear and failures. This improved load distribution and reduced friction can extend the service life of other critical components, such as gears, shafts, and seals. Additionally, self-aligning bearings often feature robust designs and high-quality materials, further enhancing their durability and reliability in demanding operating conditions.

  • Enhanced Performance in Challenging Environments:

Self-aligning bearings are well-suited for applications in challenging environments. They can withstand conditions such as high temperatures, extreme speeds, or contaminated operating conditions. The ability to accommodate misalignment and the use of specialized bearing materials and lubricants enable self-aligning bearings to maintain their performance and functionality in adverse conditions. This enhances the overall efficiency and reliability of machinery and equipment in industries such as mining, steel, paper, and food processing.

  • Ease of Installation and Maintenance:

Self-aligning bearings are designed for ease of installation and maintenance. Their self-aligning capability simplifies the alignment process during installation, reducing the time and effort required. Additionally, self-aligning bearings often feature integrated seals or shields that help to protect against contamination and retain lubrication, resulting in reduced maintenance requirements. The ease of installation and maintenance of self-aligning bearings contributes to the overall efficiency of machinery and equipment by minimizing downtime and improving overall operational productivity.

Overall, self-aligning bearings enhance the efficiency and functionality of machinery and equipment by accommodating misalignment, reducing friction and energy consumption, increasing reliability and service life, performing well in challenging environments, and enabling easier installation and maintenance. By incorporating self-aligning bearings into their designs, engineers and equipment manufacturers can optimize performance, reduce downtime, and improve the overall efficiency of their machinery and equipment.

self aligning bearing

What are the potential challenges or limitations associated with using self-aligning bearings in specific industries?

While self-aligning bearings offer many advantages, there are some potential challenges and limitations associated with their use in specific industries. Here’s a detailed explanation of these considerations:

  • Load Capacity:

While self-aligning bearings are designed to handle high loads, there are limits to their load-carrying capacity. In industries with extremely heavy or shock loads, such as heavy machinery, mining, or construction, the load demands may exceed the capabilities of self-aligning bearings. In such cases, alternative bearing designs or additional support mechanisms may be required to handle the extreme load conditions.

  • Speed Limitations:

Self-aligning bearings may have certain speed limitations due to factors such as centrifugal forces, increased friction, or potential instability at high rotational speeds. In industries that require very high-speed applications, such as aerospace or certain manufacturing processes, specialized high-speed bearings may be more suitable to ensure optimal performance and prevent premature failure.

  • Temperature and Environmental Constraints:

Self-aligning bearings have specific temperature and environmental constraints that can impact their performance. In industries involving extreme temperatures, aggressive chemicals, or harsh environmental conditions, the choice of bearing materials and lubricants becomes critical. Certain industries, such as oil and gas, chemical processing, or marine applications, may require specialized bearing designs or coatings to withstand the demanding operating conditions.

  • Maintenance and Lubrication:

Proper maintenance and lubrication are essential for the reliable operation of self-aligning bearings. In industries where access for maintenance is challenging or where frequent maintenance is not feasible, the longevity and performance of self-aligning bearings may be compromised. Additionally, industries with high contamination or abrasive particles in the operating environment may require more frequent lubrication or specialized sealing arrangements to protect the bearings from premature wear and failure.

  • Space Limitations:

Self-aligning bearings have a larger footprint compared to some other bearing designs due to their double-row construction and spherical outer ring raceway. In industries with space constraints or compact machinery designs, the dimensions of self-aligning bearings may pose challenges in terms of integration or fitting within limited spaces. In such cases, alternative bearing designs with smaller profiles may be more suitable.

  • Cost Considerations:

Self-aligning bearings can be more expensive compared to certain other bearing types, especially in applications that require larger sizes or specialized configurations. In industries with cost-sensitive considerations, such as consumer products or automotive manufacturing, the higher cost of self-aligning bearings may influence the selection of alternative bearing options that can meet the application requirements at a lower cost.

While self-aligning bearings offer numerous benefits, it is important to carefully evaluate the specific challenges and limitations in each industry or application. By considering these factors and consulting with bearing experts or manufacturers, the most suitable bearing solution can be selected to ensure optimal performance, reliability, and cost-effectiveness.

self aligning bearing

Can you describe the load-carrying capacity and load ratings of self-aligning bearings?

Self-aligning bearings are designed to carry both radial and axial loads, and their load-carrying capacity is an essential consideration for their proper selection and application. Here’s a detailed description of the load-carrying capacity and load ratings of self-aligning bearings:

  • Radial Load Capacity:

The radial load capacity of a self-aligning bearing refers to its ability to carry loads that act perpendicular to the axis of rotation. It is influenced by factors such as bearing geometry, material properties, and internal design. Self-aligning bearings, particularly spherical roller bearings, are known for their high radial load-carrying capacity. This is due to their construction that includes multiple rows of robust rolling elements and optimized raceway profiles. The larger contact area between the rolling elements and raceways allows for efficient load distribution, enabling the bearing to handle substantial radial loads.

  • Axial Load Capacity:

The axial load capacity of a self-aligning bearing refers to its ability to carry loads that act parallel to the axis of rotation. The axial load-carrying capacity depends on the bearing type and design, as well as the arrangement of rolling elements. Self-aligning thrust roller bearings, for example, are specifically designed to handle significant axial loads. They utilize cylindrical or tapered rolling elements arranged in a specific orientation to withstand axial forces. Self-aligning ball bearings can also carry moderate axial loads in addition to their primary radial load-carrying capacity.

  • Dynamic Load Rating:

The dynamic load rating of a self-aligning bearing is a standardized value that indicates the maximum load that the bearing can sustain for a specified number of rotations or operating hours without experiencing premature fatigue failure. It is expressed in terms of the calculated dynamic equivalent radial or axial load, which takes into account the actual load distribution within the bearing. The dynamic load rating is typically provided by the manufacturer and allows engineers to compare and select bearings based on their expected performance under dynamic operating conditions.

  • Static Load Rating:

The static load rating of a self-aligning bearing represents the maximum load that the bearing can sustain without permanent deformation or excessive stress when the bearing is stationary or subjected to very slow rotations. It is typically higher than the dynamic load rating. The static load rating is an important consideration for applications where the bearing may be subjected to prolonged static or slow-speed conditions, such as in machinery that operates with intermittent or intermittent rotational motion.

It is important to note that the load-carrying capacity and load ratings provided by manufacturers are based on standardized testing methods and assumptions about operating conditions. Actual load capacity can be influenced by factors such as temperature, lubrication, misalignment, and operating speed. Therefore, it is crucial to consider the specific application requirements and consult the manufacturer’s technical data and guidelines when selecting a self-aligning bearing to ensure its suitability and optimal performance.

China Good quality CZPT CZPT CZPT CZPT Self-Aligning Roller Bearing Printing Machinery Parts Bearing Spherical Roller Bearing Distributor   bearing driver kitChina Good quality CZPT CZPT CZPT CZPT Self-Aligning Roller Bearing Printing Machinery Parts Bearing Spherical Roller Bearing Distributor   bearing driver kit
editor by CX 2024-03-03

China best OEM Brand 1200 Self-Aligning Ball Bearings bearing driver kit

Product Description

OEM 12 Series 1200 Self-aligning Ball Bearings

                                                                                       

Product Name 

OEM 12 Series 1200 Self-aligning Ball Bearings

Brand

TFN / SEMRI / OEM

Model Number

1200

Dimension

10x30x9mm

Ring Material

Chrome Steel

Cage Material 

Brass,Nylon,Steel

Precision

P0, P6, P5, or as requested

Vibration

ZV1, ZV2, ZV3, or as requested

Clearance 

C0,C2,C3, or as requested 

Type

 12 series,12k series,22series,22k series,13 series,13k series,23 series,23k series

Features 

Accommodate static and dynamic misalignment ,Excellent high-speed performance ,Minimum maintenance ,Low friction ,Excellent light load performance ,Low noise.

Quality standard

ISO9001:2000/ SGS

Quality Control Process 

1.Assembly

2.Windage test

3.Cleaning

4.Rotary test

5.Greasing and gland

6.Noise inspection

7.Appearance inspection

8.Rust prevention

9.Product packaging

Application 

Self-aligning Ball Bearings Main applications: paper making machinery, speed reducer, railway rolling stock axle, gear box bearing seat of steel rolling mill, roller, crusher, vibrating screen, printing machinery, woodworking machinery, various industrial reducer, vertical belt centering bearing.

Other Self-aligning ball bearings models : 

Bearing Number Boundary dimensions(mm) Basic load ratings(kN) Limiting speeds(rpm) Mass(Kg)
  d D B rs min Cr Cor Grease Oil (Approx.)
1215 75 130 25 1.5 39 15.7 3,900 4,600 1.33
1216 80 140 26 2 40 17 3,700 4,300 1.65
1217 85 150 28 2 49 20.8 3,500 4,100 2.06
1218 90 160 30 2 57 23.5 3,300 3,800 2.51
1219 95 170 32 2.1 64 27.1 3,100 3,600 3.1
1220 100 180 34 2.1 69 29.7 2,900 3,400 3.7
1221 105 190 36 2.1 74.5 32.5 2,800 3,300 4.34
1222 110 200 38 2.1 80.5 35.5 2,600 3,100 5.15
1204K 20 47 14 1 9.9 2.61 13,000 15,000 0.114
1205K 25 52 15 1 12.1 3.3 11,000 13,000 0.135
1206K 30 62 16 1 15.6 4.65 9,200 11,000 0.213
1207K 35 72 17 1.1 15.8 5.1 8,000 9,400 0.312
1208K 40 80 18 1.1 19.3 6.55 7,100 8,400 0.407
1209K 45 85 19 1.1 21.9 7.35 6,400 7,500 0.448
1210K 50 90 20 1.1 22.7 8.1 5,800 6,800 0.504
1211K 55 100 21 1.5 26.8 10 5,300 6,200 0.679
1212K 60 110 22 1.5 30 11.5 4,900 5,800 0.864
2211 55 100 25 1.5 26.5 9.9 5,000 5,800 0.787
2212 60 110 28 1.5 34 12.6 4,600 5,400 1.08
2213 65 120 31 1.5 43.5 16.4 4,200 5,000 1.44
2214 70 125 31 1.5 44 17.1 3,900 4,600 1.52
2215 75 130 31 1.5 44.5 17.8 3,700 4,300 1.58
2216 80 140 33 2 48.5 19.9 3,400 4,000 1.99
2217 85 150 36 2 58 23.6 3,200 3,800 2.54
2218 90 160 40 2 70 28.7 3,100 3,600 3.19
2219 95 170 43 2.1 83.5 34.5 2,900 3,400 3.89
2220 100 180 46 2.1 94 38.5 2,700 3,200 4.65
2221 105 190 50 2.1 109 45 2,600 3,100 6.07
2222 110 200 53 2.1 124 51.5 2,500 2,900 7.1
2204K 20 47 18 1 12.6 3.3 12,000 14,000 0.137
2205K 25 52 18 1 12.3 3.45 10,000 12,000 0.153
2206K 30 62 20 1 15.2 4.5 8,600 10,000 0.25
2207K 35 72 23 1.1 21.5 6.6 7,500 8,800 0.382
2208K 40 80 23 1.1 22.3 7.35 6,700 7,900 0.482
2209K 45 85 23 1.1 23.2 8.15 6,000 7,100 0.528
2210K 50 90 23 1.1 23.2 8.45 5,500 6,400 0.569
2211K 55 100 25 1.5 26.5 9.9 5,000 5,800 0.769
2212K 60 110 28 1.5 34 12.6 4,600 5,400 1.06
2213K 65 120 31 1.5 43.5 16.4 4,200 5,000 1.41
1315 75 160 37 2.1 79.5 30 3,300 3,900 3.55
1316 80 170 39 2.1 88.5 33 3,100 3,600 4.17
1317 85 180 41 3 97.5 38 2,900 3,400 4.96
1318 90 190 43 3 116 44.5 2,700 3,200 5.78
1319 95 200 45 3 132 51 2,600 3,000 6.69
1320 100 215 47 3 143 57.5 2,400 2,900 8.3
1321 105 225 49 3 156 64.5 2,300 2,700 10
1322 110 240 50 3 164 71.5 2,200 2,600 11.8
1304K 20 52 15 1.1 12.4 3.35 11,000 13,000 0.158
1305K 25 62 17 1.1 18 5 9,100 11,000 0.251
1306K 30 72 19 1.1 21.3 6.3 7,700 9,100 0.377
1307K 35 80 21 1.5 25.1 7.85 6,800 8,000 0.492
1308K 40 90 23 1.5 29.6 9.7 6,000 7,000 0.698
1309K 45 100 25 1.5 38 12.7 5,400 6,300 0.938
1310K 50 110 27 2 43.5 14.1 4,900 5,800 1.18
1311K 55 120 29 2 51.5 17.9 4,500 5,200 1.56
1312K 60 130 31 2.1 57 20.8 4,100 4,800 1.93
1313K 65 140 33 2.1 62 22.9 3,800 4,500 2.38
1315K 75 160 37 2.1 79.5 30 3,300 3,900 3.5
1316K 80 170 39 2.1 88.5 33 3,100 3,600 4.11
2312 60 130 46 2.1 87 28.2 3,800 4,500 2.59
2313 65 140 48 2.1 96 32.5 3,600 4,200 3.2
2314 70 150 51 2.1 109 37.5 3,300 3,900 3.92
2315 75 160 55 2.1 123 43 3,100 3,600 4.78
2316 80 170 58 2.1 128 45 2,900 3,400 5.65
2317 85 180 60 3 140 51.5 2,700 3,200 6.55
2318 90 190 64 3 152 57.5 2,600 3,000 7.75
2319 95 200 67 3 165 64.5 2,400 2,800 9.05
2320 100 215 73 3 192 79 2,300 2,700 11.5
2321 105 225 77 3 205 87 2,200 2,600 13.2
2322 110 240 80 3 217 94.5 2,100 2,400 15.8
2304K 20 52 21 1.1 18.1 4.7 10,000 12,000 0.201
2305K 25 62 24 1.1 24.4 6.6 8,500 10,000 0.326
2306K 30 72 27 1.1 31.5 8.75 7,200 8,500 0.485
2307K 35 80 31 1.5 39.5 11.3 6,300 7,400 0.653
2308K 40 90 33 1.5 45 13.5 5,600 6,600 0.895
2309K 45 100 36 1.5 54 16.7 5,000 5,900 1.2
2310K 50 110 40 2 64.5 20.2 4,600 5,400 1.59
2311K 55 120 43 2 75.5 24 4,200 4,900 2.05
2312K 60 130 46 2.1 87 28.2 3,800 4,500 2.52
2313K 65 140 48 2.1 96 32.5 3,600 4,200 3.12
2315K 75 160 55 2.1 123 43 3,100 3,600 4.66
2316K 80 170 58 2.1 128 45 2,900 3,400 5.5

                                                                                   

Certificate

Packing

FAQ

Q:Why choose us?                                                        

A:1. We are professional,have factory in ZheJiang for many years.

   2. We are experienced for 10 years.

   3. We can offer a various kind of bearing with high quality:Z1V1,Z2V2,Z3V3 and best price

 

Q:How is the quality of your products?                             

A:The same quality, we have lower price.The same price,we have better quality.

 

Q:Except self-aligning ball bearing,what other main bearing do you have?

A:Cylindrical roller bearing,Taper Roller Bearing,Thrust roller bearing,Spherical roller bearing,Deep groove ball bearing,Angular contact ball bearing etc.

 

Q:Can I get 1200 self-aligning ball bearing free samples?                                                 

A:We will charge a little sample fee for our regular designs or customized ones, These charges will be refunded to you when your mass production order is confirmed.

 

Q:Can you make the products as our requirement?     

A:We have more than 10years’ OEM experience. We supply products fo more than 300 automobile parts factories.

 

 

 

  /* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

Product Name: 2206 Self-Aligning Ball Bearing Gear Box Bearing
Width: 9mm
Bore Diameter: 10mm
Samples:
US$ 0.1/Piece
1 Piece(Min.Order)

|

Order Sample

Customization:
Available

|

Customized Request

.shipping-cost-tm .tm-status-off{background: none;padding:0;color: #1470cc}

Shipping Cost:

Estimated freight per unit.







about shipping cost and estimated delivery time.
Payment Method:







 

Initial Payment



Full Payment
Currency: US$
Return&refunds: You can apply for a refund up to 30 days after receipt of the products.

self aligning bearing

How do innovations and advancements in self-aligning bearing technology impact their use?

Advancements and innovations in self-aligning bearing technology have a significant impact on their use in various industries. Here’s a detailed explanation:

  • Improved Performance:

Innovations in self-aligning bearing technology often result in improved performance characteristics. These advancements can include:

  • Load Capacity: New bearing designs and materials can enhance the load-carrying capacity of self-aligning bearings, allowing them to withstand higher loads or operate under more demanding conditions.
  • Speed Capability: Advancements in bearing manufacturing techniques and materials can increase the maximum rotational speed at which self-aligning bearings can operate effectively, enabling their use in high-speed applications.
  • Friction Reduction: Innovations in bearing design, lubrication, and surface treatments contribute to reducing friction and energy losses, resulting in improved efficiency and reduced operating costs.
  • Sealing and Contamination Resistance: New sealing technologies and materials can enhance the sealing performance of self-aligning bearings, providing better protection against contaminants, moisture, and harsh environmental conditions.
  • Temperature and Corrosion Resistance: Advances in bearing materials and coatings enable self-aligning bearings to withstand extreme temperatures, aggressive chemicals, and corrosive environments, expanding their range of applications.
  • Extended Service Life:

Innovations in self-aligning bearing technology often result in improved durability and longevity. These advancements can include:

  • Materials: The development of new bearing materials, such as advanced steels, ceramics, or composites, can significantly enhance the bearing’s resistance to wear, fatigue, and surface damage, leading to extended service life.
  • Lubrication: Advancements in lubrication technologies, such as the use of solid lubricants or advanced grease formulations, can provide better film formation, reduce friction, and minimize wear, thereby increasing the bearing’s operating life.
  • Surface Treatments: Innovative surface treatments, such as coatings or finishes, can improve the bearing’s resistance to corrosion, wear, and fretting, contributing to longer service intervals and reduced maintenance requirements.
  • Condition Monitoring: The integration of sensor technologies and data analytics in self-aligning bearings enables real-time monitoring of operating conditions, allowing for proactive maintenance and early detection of potential failures, thus maximizing the bearing’s service life.
  • Application Expansion:

Advancements in self-aligning bearing technology often lead to an expansion of their application range. These advancements can include:

  • New Industries: Innovations in self-aligning bearing technology can enable their use in industries or applications where they were previously not feasible. This opens up opportunities in emerging sectors, such as renewable energy, electric vehicles, robotics, or medical devices.
  • Challenging Environments: Improved performance characteristics, such as enhanced sealing, temperature resistance, or contamination resistance, allow self-aligning bearings to be deployed in challenging environments, including offshore installations, high-temperature processes, or chemically aggressive applications.
  • Specialized Applications: Advancements in self-aligning bearing technology can lead to the development of specialized bearing variants tailored for specific applications, such as high-speed machining, precision equipment, or demanding industrial automation systems.

Overall, innovations and advancements in self-aligning bearing technology bring about enhanced performance, extended service life, and expanded application possibilities. These advancements drive improvements in industrial productivity, reliability, and efficiency, making self-aligning bearings a valuable component in a wide range of industries and applications.

self aligning bearing

What is the impact of proper lubrication and maintenance on the performance and lifespan of self-aligning bearings?

Proper lubrication and maintenance have a significant impact on the performance and lifespan of self-aligning bearings. Here’s a detailed explanation of their importance:

  • Lubrication:

Proper lubrication is crucial for self-aligning bearings as it provides a protective film between the rolling elements and raceways, reducing friction and wear. Here are the key impacts of proper lubrication:

  • Reduced Friction and Wear: Adequate lubrication helps minimize friction and wear between the rolling elements and raceways. This reduces heat generation, prevents excessive wear, and extends the bearing’s lifespan.
  • Optimized Load Distribution: Proper lubrication ensures that the load is distributed evenly across the bearing components. This helps prevent localized stresses and improves the overall load-carrying capacity of the bearing.
  • Corrosion and Contamination Protection: Lubrication forms a protective barrier that helps prevent corrosion and protects the bearing against contaminants such as dust, dirt, and moisture. This enhances the bearing’s resistance to damage and maintains its performance in challenging environments.
  • Noise and Vibration Reduction: Properly lubricated bearings exhibit reduced noise and vibration levels, contributing to smoother and quieter operation of the machinery.
  • Maintenance:

Regular maintenance practices are essential for ensuring the optimal performance and lifespan of self-aligning bearings. Here are the key impacts of proper maintenance:

  • Early Detection of Issues: Regular inspections and maintenance activities enable the early detection of potential problems such as misalignment, excessive wear, or lubrication issues. Timely identification of these issues allows for proactive measures to be taken, preventing further damage and minimizing downtime.
  • Preservation of Alignment: Proper maintenance helps ensure the correct alignment of the bearing with its mating components. This is particularly important for self-aligning bearings, as misalignment beyond their specified limits can lead to decreased performance and premature failure.
  • Lubrication Monitoring: Maintenance involves monitoring the lubrication condition, including oil or grease quality, contamination levels, and replenishment requirements. Regular lubrication checks and replenishment help maintain the optimal lubricating film and extend the bearing’s service life.
  • Cleaning and Debris Removal: Maintenance activities include cleaning the bearing and its surrounding areas, removing accumulated debris, and ensuring proper sealing. This helps prevent contamination and ensures the smooth operation of the bearing.
  • Replacement of Worn Components: Through maintenance, worn or damaged components can be identified and replaced, preventing further damage and maintaining the bearing’s performance. This can include replacing seals, cages, or damaged rolling elements.

Proper lubrication and maintenance practices are essential for maximizing the performance and lifespan of self-aligning bearings. They help reduce friction, prevent excessive wear, protect against corrosion and contaminants, preserve alignment, and enable early detection of potential issues. Adhering to manufacturer recommendations and industry best practices for lubrication and maintenance ensures the reliable and efficient operation of machinery and extends the service life of self-aligning bearings.

self aligning bearing

How do self-aligning bearings differ from fixed or non-self-aligning bearings?

Self-aligning bearings differ from fixed or non-self-aligning bearings in several ways. Here’s a detailed explanation of the differences between these types of bearings:

  • Design and Construction:

The design and construction of self-aligning bearings are distinct from fixed or non-self-aligning bearings. Self-aligning bearings have a spherical outer ring raceway, which allows for misalignment compensation. In contrast, fixed or non-self-aligning bearings typically have a cylindrical or tapered outer ring raceway, designed for precise alignment between the shaft and the housing.

  • Misalignment Compensation:

The primary difference between self-aligning bearings and fixed or non-self-aligning bearings is their ability to compensate for misalignment. Self-aligning bearings can accommodate angular misalignment, axial misalignment, and shaft deflection, whereas fixed or non-self-aligning bearings have limited tolerance for misalignment and require precise alignment during installation.

  • Load Distribution:

Self-aligning bearings distribute the load more evenly across the rolling elements and raceways, thanks to their ability to accommodate misalignment. This helps reduce localized stresses and minimize the risk of premature failure. Fixed or non-self-aligning bearings, without the ability to compensate for misalignment, may experience uneven loading and increased stress on specific areas, leading to accelerated wear and potential failure.

  • Friction and Wear:

Due to their misalignment compensation capability, self-aligning bearings help reduce friction and wear. Misalignment in fixed or non-self-aligning bearings can cause increased friction and localized wear, leading to reduced bearing life. Self-aligning bearings distribute the load more evenly, minimizing friction and wear on the rolling elements and raceways, resulting in improved reliability and longevity.

  • Application Range:

The different design and misalignment compensation capability of self-aligning bearings make them suitable for a broader range of applications compared to fixed or non-self-aligning bearings. Self-aligning bearings are commonly used in applications where misalignment is expected, such as heavy machinery, conveyor systems, and mining equipment. Fixed or non-self-aligning bearings are typically employed in applications that require precise alignment, such as machine tools or high-precision equipment.

  • Installation and Maintenance:

Self-aligning bearings offer easier installation and maintenance compared to fixed or non-self-aligning bearings. The self-aligning capability of these bearings allows for more flexibility during the installation process, accommodating slight misalignments. In contrast, fixed or non-self-aligning bearings require careful alignment procedures to ensure proper functioning. Additionally, self-aligning bearings are often designed for easier maintenance, enabling tasks such as re-greasing or replacement without extensive disassembly.

In summary, self-aligning bearings differ from fixed or non-self-aligning bearings in their design, misalignment compensation capability, load distribution, friction and wear characteristics, application range, and ease of installation and maintenance. These differences make self-aligning bearings particularly suitable for applications where misalignment is expected or dynamic operating conditions are present.

China best OEM Brand 1200 Self-Aligning Ball Bearings   bearing driver kitChina best OEM Brand 1200 Self-Aligning Ball Bearings   bearing driver kit
editor by CX 2024-02-29

China Hot selling Cheap Price and High Quality Self Aligning Spherical Roller Bearing 22260 Cck/ Cak/W33 for Gearbox Parts bearing driver kit

Product Description

Spherical roller bearings are bearings with drum-shaped rollers assembled between the inner ring with 2 raceways and the outer ring with spherical raceways. Spherical roller bearings have 2 rows of rollers, which mainly bear radial load, but can also bear axial load in any direction.

Product Description

 CA  (spherical roller bearing single row)
Combining high-quality material, optimized design and precision manufacturing, this bearing is JRZC’s new generation of high-performance bearings, maximizing the productivity of your equipment.

Spherical Roller Bearing

Product Name Spherical Roller Bearing
Precision Rating P6, P0, P5, P4, P2
Material Bearing Steel (GCr15)
Clearance C0 C1 C2 C3 C4 C5
Vibration & Noisy Z1, Z2, Z3 V1, V2, V3
Cage Brass, Nylon, Steel
Seal ZZ, 2RS
Features High Precision, High Speed, Long Life, High Reliability, Low Noise, Reduce Friction
Certification ISO 9, 422740 used in cement industry.And FC, FCD series used inSteel Industry.

Packaging & Shipping

Our packing: 

* Industrial pakage+outer carton+pallets
* sigle box+outer carton+pallets
* Tube package+middle box+outer carton+pallets
* According to your requirments

Company Profile

ABOUT US

BEARING MANUFACTURE

1. 20+ yearsof experience in manufacturing bearing;
2.Annual output value of more than 40 million yuan;
3.Passed the ISO9001 international quality certification system;
4.160 sets imported production equipments;
5.Professional sales team.

The company has more than 160 sets of modern production equipment and complete testing methods. Supported by a strong R&D team and advanced production technology, the company’s product quality has been improved year by year. It is catching up with HangZhou, HangZhou and HangZhou Bearings from the 3 major technology platforms of design, manufacturing and testing.
Export to many countries
HangZhou Jinrui Bearing Co., Ltd. not only has customers in many industries in China, but the company’s products are also exported to India, Southeast Asia, the Middle East, Europe and the United States and other countries. It has independent export rights and more than 10 years of foreign trade export experience.

FAQ

SAMPLES

1. Samples quantity: 1-10 PCS are available. 
2. Free samples: It depends on the Model No., material and quantity. Some of the bearings samples need client to pay samples charge and shipping cost. 
3. It’s better to start your order with Trade Assurance to get full protection for your samples order. 

CUSTOMIZED
The customized LOGO or drawing is acceptable for us. 

MOQ
1. MOQ: 10 PCS mix different standard bearings. 
2. MOQ: 3000 PCS customized your brand bearings. 

OEM POLICY
1. We can printing your brand (logo, artwork)on the shield or laser engraving your brand on the shield. 
2. We can custom your packaging according to your design
3. All copyright own by clients and we promised don’t disclose any info. 

SUPORT
Please visit our bearings website, we strongly encourge that you can communicate with us through email, thanks! 

We have all kinds of bearings, just tell me your item number and quantity, best price will be offered to you soon
The material of the bearings, precision rating, seals type, OEM service, etc, all of them we can make according to your requirement. 

  /* March 10, 2571 17:59:20 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

Feature: Best Price, High Speed, Long Life
OEM: Available
Hardness: 59-63HRC
Samples:
US$ 10/Piece
1 Piece(Min.Order)

|

Order Sample

Customization:
Available

|

Customized Request

.shipping-cost-tm .tm-status-off{background: none;padding:0;color: #1470cc}

Shipping Cost:

Estimated freight per unit.







about shipping cost and estimated delivery time.
Payment Method:







 

Initial Payment



Full Payment
Currency: US$
Return&refunds: You can apply for a refund up to 30 days after receipt of the products.

self aligning bearing

What are the eco-friendly or sustainable aspects of self-aligning bearing materials?

Self-aligning bearings can incorporate eco-friendly or sustainable aspects in their material composition. Here’s a detailed explanation:

  • Recyclable Materials:

Many self-aligning bearings are made from materials that are recyclable. Steel, which is commonly used for bearing rings and rolling elements, is highly recyclable and can be processed and reused multiple times without significant loss of properties. By choosing self-aligning bearings made from recyclable materials, the environmental impact associated with the disposal and production of bearings can be reduced.

  • Low Environmental Footprint:

The production of self-aligning bearings involves various manufacturing processes. Manufacturers often strive to optimize these processes to minimize energy consumption, reduce waste generation, and lower greenhouse gas emissions. By improving energy efficiency and reducing environmental footprint during production, self-aligning bearing manufacturers contribute to sustainable practices.

  • Reduced Material Consumption:

The design and development of self-aligning bearings focus on optimizing their performance while minimizing material consumption. Through advanced engineering techniques, including material selection, design optimization, and improved manufacturing processes, manufacturers can reduce the amount of material required to produce self-aligning bearings. This not only helps to conserve natural resources but also reduces the overall weight of the bearing, leading to lower energy consumption during operation.

  • Alternative Materials:

In recent years, there have been advancements in the development of alternative bearing materials that offer improved sustainability characteristics. For example:

  • Ceramic Bearings: Ceramic materials, such as silicon nitride or zirconia, are increasingly used in self-aligning bearings due to their excellent wear resistance, corrosion resistance, and high-temperature capabilities. Ceramic bearings can contribute to sustainability by reducing the need for lubrication, extending maintenance intervals, and minimizing the use of lubricants that may have environmental impacts.
  • Polymer Bearings: Self-aligning bearings made from polymer materials, such as reinforced plastics or engineered polymers, offer advantages such as self-lubrication, resistance to corrosion and chemicals, and reduced weight. Polymer bearings can provide sustainability benefits by eliminating the need for external lubrication, reducing friction and energy consumption, and offering potential for longer service life.
  • Extended Service Life:

Self-aligning bearings with extended service life contribute to sustainability by reducing the frequency of bearing replacements and associated waste generation. Advancements in bearing materials, surface treatments, and lubrication technologies have led to improved durability and longer operating life, resulting in reduced environmental impact and lower maintenance requirements.

It’s important to note that while self-aligning bearing materials can have eco-friendly or sustainable aspects, the overall sustainability of an application or system also depends on other factors, such as energy efficiency, proper maintenance practices, and end-of-life disposal considerations. Therefore, a holistic approach considering the entire lifecycle of the equipment and its components is essential for achieving sustainable practices.

self aligning bearing

Can you explain the installation and alignment considerations for self-aligning bearings?

Proper installation and alignment are crucial for the optimal performance and longevity of self-aligning bearings. Here’s a detailed explanation of the installation and alignment considerations:

  • Pre-Installation Preparation:

Prior to the installation of self-aligning bearings, it is essential to ensure a clean and suitable working environment. Here are some key considerations:

  • Cleanliness: The work area should be clean and free from dust, dirt, and contaminants to prevent the ingress of foreign particles during the installation process.
  • Tools and Equipment: Prepare the necessary tools and equipment required for the installation, including suitable lifting devices, torque wrenches, and lubrication apparatus.
  • Inspection: Thoroughly inspect the bearing and its components for any signs of damage or defects. Replace any worn or damaged parts before proceeding with the installation.
  • Lubrication: Apply the recommended lubricant to the bearing and ensure that it is properly distributed before installation. Lubrication helps reduce friction, prevent excessive wear, and facilitate smooth operation.
  • Mounting Considerations:

When mounting self-aligning bearings, it is important to follow certain guidelines to ensure proper fit and alignment:

  • Shaft and Housing Tolerances: Check the shaft and housing tolerances to ensure they comply with the specifications provided by the bearing manufacturer. Proper tolerances help achieve the correct fit and prevent excessive clearance or interference.
  • Shaft and Housing Preparation: Clean the shaft and housing surfaces and remove any burrs or rough edges that could interfere with the bearing’s seating. Ensure that the shaft and housing are machined to the recommended tolerances and finishes.
  • Mounting Method: There are various methods for mounting self-aligning bearings, including press fitting, thermal expansion, and hydraulic mounting. Follow the manufacturer’s instructions and recommended mounting method to ensure a secure and accurate fit.
  • Sealing: If the self-aligning bearing has integral seals or shields, ensure that they are correctly positioned and aligned during installation. Proper sealing helps protect the bearing against contaminants and extends its service life.
  • Tightening: When tightening the bearing onto the shaft or in the housing, use the recommended torque values provided by the manufacturer. Over-tightening can lead to excessive preload or damage, while under-tightening can result in insufficient seating and compromised performance.
  • Alignment Considerations:

Proper alignment is crucial for self-aligning bearings to function optimally. Here are some alignment considerations:

  • Angular Misalignment: Self-aligning bearings can accommodate angular misalignment to a certain degree. However, it is important to keep the misalignment within the manufacturer’s specified limits to prevent excessive stress and premature wear.
  • Shaft Deflection: Consider the potential shaft deflection that may occur during operation and ensure that the self-aligning bearing can handle the expected deflection without exceeding its capacity. This may involve selecting a bearing with appropriate load-carrying capacity and considering additional support or stabilization measures.
  • Alignment Verification: After installation, verify the alignment of the self-aligning bearing by measuring the axial and radial runout using appropriate alignment tools. Adjust the positioning if necessary to achieve the desired alignment within the specified tolerances.

By following these installation and alignment considerations, you can ensure the proper fit, alignment, and performance of self-aligning bearings. Adhering to the manufacturer’s guidelines and best practices helps maximize the lifespan and reliability of the bearings in various applications.

self aligning bearing

How do self-aligning bearings compensate for misalignment in machinery?

Self-aligning bearings are designed to compensate for misalignment in machinery, allowing them to accommodate angular misalignment, axial misalignment, and shaft deflection. Here’s a detailed explanation of how self-aligning bearings achieve misalignment compensation:

  • Spherical Outer Ring Raceway:

The key feature of self-aligning bearings is their spherical outer ring raceway. This raceway is designed to have a curvature that matches the spherical shape of the rolling elements, such as balls or rollers. The spherical outer ring raceway allows the bearing to tilt or swivel in response to misalignment, enabling it to self-align with the mating components.

  • Rolling Element Design:

The rolling elements in self-aligning bearings are carefully designed to facilitate misalignment compensation. For example, spherical roller bearings have barrel-shaped rollers, while self-aligning ball bearings have two rows of balls. These rolling elements can adjust their positions within the bearing, redistributing the load and accommodating misalignment between the shaft and the housing.

  • Internal Clearance:

Self-aligning bearings often have a larger internal clearance compared to fixed or non-self-aligning bearings. This additional clearance provides space for the bearing components to move and adjust their positions during misalignment. The internal clearance allows the bearing to properly distribute the load, reduce friction, and prevent excessive stress on the rolling elements and raceways.

  • Flexible Mounting:

Self-aligning bearings offer flexibility in their mounting arrangements. They can tolerate slight misalignments during installation, which simplifies the alignment process. This flexibility is particularly beneficial in applications where thermal expansion, shaft deflection, or other dynamic factors may cause misalignment during operation.

  • Load Distribution:

When misalignment occurs, self-aligning bearings distribute the load more evenly across the rolling elements and raceways. This even load distribution helps reduce localized stresses and minimizes the risk of premature failure. By accommodating misalignment, self-aligning bearings allow for smoother operation and improved reliability in machinery.

It’s important to note that while self-aligning bearings can compensate for certain degrees of misalignment, there are limits to their misalignment capability. Excessive misalignment beyond the bearing’s specified limits can lead to increased friction, reduced bearing life, and potential damage. Therefore, it is crucial to follow the manufacturer’s guidelines and recommendations regarding misalignment limits and operating conditions to ensure optimal performance and longevity of self-aligning bearings in machinery.

China Hot selling Cheap Price and High Quality Self Aligning Spherical Roller Bearing 22260 Cck/ Cak/W33 for Gearbox Parts   bearing driver kitChina Hot selling Cheap Price and High Quality Self Aligning Spherical Roller Bearing 22260 Cck/ Cak/W33 for Gearbox Parts   bearing driver kit
editor by CX 2024-02-24

China high quality 1300 Series Insudtrial Components Ball Bearing Self-Aligning Ball Bearing bearing driver kit

Product Description

Advantages and Features

Product Name self-aligning ball bearing
Model Number 1301, 1302, 1303, 1304, 1305, 1306, 1307, 1308, 1309, 1310, 1311, 1312, 1313, 1314, 1315, 1316
Brand: ZGXSY or as Customers’ needs
Types: OPEN
Material: Carbon Seel, Chrome Steel, Stain Steel, Plastic, etc
Precision:

ABEC-1, ABEC-2, ABEC-3, ABEC-5, ABEC-7, ABEC-9, ABEC-11.

Application: Motor, Machinery, Electric Tools, Sports Apparatus, office equipment , Scooter Aluminum windows , shower blocks, hanging round, closet wheel, 
Package  Single box or according to customers requirement
Service  OEM, supply free sampe. prompt delivery 

• Self-aligning style 
• Spherical raceways to minimise noise 
• The lowest friction 
• Quiet and smooth operation at high speed 
• Dynamic misalignment of up to 7 degree can be accomodated 
• Widespread use and versatility

About Self-aligning Ball Bearing
The self-aligning ball bearing has 2 rows of balls and a common concave sphered raceway in the outer ring. The bearing is consequently self-aligning and insensitive to angular misalignments of the shaft relative to the housing.

This type of bearing consists of spherical outer race and inner race with 2 tracks, a cage, and a complement of spherical shaped rollers. Just like double row self aligning ball bearings too are not sensitive to misalignment and they can adjust themselves to shaft deflections.
Due to the principle, sizes and shaft of rollers and accuracy with which they are guided these bearings have un axial capacity. The design of this bearing permits radial load and heavy thrust load in either direction.

We also supply & produce
 

Ball Bearing Deep Groove Ball Bearing

60 **,618 ** (1, 422740 used in cement industry.And FC, FCD series used in steel Industry.

  

 


Aout us
ZheJiang XSY bearing Co., Ltd. is an enterprise majoring in the manufacturing of precision bearings. It has a integrate service chain of research, producing and sales. The bearings with brand trademark of “ZGXSY” win good quality reputation in domestic bearing market. The company is equipped with modern production facilities and advanced testing instruments, mainly specific to imported top-range products. We professionally produce precise bearings such as spherical roller bearings, thrust ball bearings, deep groove ball bearings, cylindrical roller bearings, tapered roller bearings, thrust spherical roller bearings and so on. The productions are widely used as auxiliary products in metallurgy, electrical machine, mine, petroleum, chemical, coal, cement, paper making, wind electricity, heavy machinery, engineering machinery, port machinery and other industries.

T esting
All our products are tested sctrictly before delivery. The testing process is:  Dimension Measurement-Waviness, roundness and form analysis-Noise and vibration testing-Noise and vibration testing-Non destructive testing-Grease testing machines.

P ackaging & Shipments
Packaging Details: 
 1.tube /plastic bag+box+cartons+pallets
2.plastic bag+single box+cartons+pallets
3.industrial packing+cartons+pallets
Delivery Details:
 Less than 1000PCS, deliver  within 5 days by Express or Airplane.
 More than 1000PCS, deliver within 15 days by sea.

FAQ
1. Are you a factory or a trading company?
 ZheJiang XSY Bearing Co., Ltd. is a professional manufacture of deep groove ball bearings and other bearings.
 2. Is OEM available?
 Yes, OEM is available. We have professional designer to help your brand promotion. 
 3. Is the sample available?
 Yes, samples are available for you to test the quality.
 4. Have the products been tested before shipping?
 Yes, all of our bearings have been tested before delivery.
 5. How long is your delivery time?
 As mentioned above, there are different types of shipping for your order. We make sure to deliver goods once all products are produced and tested.
 6. What is your terms of payment ?
 You can pay by T/T, L/C, Westunion, Paypal,etc., and it can be negotiated according to different orders with different amount.
 7. Can we visit your factory ?
 Sure. Welcome to XSY Bearing Co., Ltd. and offer your kind guidance.
8.How to stock and maintenance my bearings?
Do not store bearings directly on concrete floors, where water can condense and collect on the bearing;
Store the bearings on a pallet or shelf, in an area where the bearings will not be subjected to high humidityor extreme temperature that may result in condensation forming;
Always put oiled paper or, if not available, put plastic sheets between rollers and cup races of tapered roller bearings.
C ontact us
/* March 10, 2571 17:59:20 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

Seals Type: Open
Weight: 0.058-11.7kg
Rolling Body: Ball Bearings
The Number of Rows: Double
Outer Dimension: Medium and Large(120-190mm)
Material: Bearing Steel
Samples:
US$ 0/Piece
1 Piece(Min.Order)

|
Request Sample

Customization:
Available

|

Customized Request

self aligning bearing

Can you provide guidance on the selection and sizing of self-aligning bearings for specific applications?

Yes, here’s a detailed explanation on the selection and sizing of self-aligning bearings for specific applications:

  • Understand the Application Requirements:

The first step in selecting and sizing self-aligning bearings is to thoroughly understand the requirements of the application. Consider factors such as:

  • Load: Determine the magnitude and direction of the load the bearing will be subjected to, including static, dynamic, and shock loads.
  • Speed: Identify the rotational speed or frequency of operation to ensure the selected bearing can handle the required speed without compromising performance.
  • Environment: Consider the operating environment, including temperature range, presence of contaminants, moisture, or corrosive substances, and any other specific environmental factors that may affect the bearing’s performance.
  • Mounting and Space Constraints: Evaluate the available space for bearing installation and any specific mounting requirements or constraints within the application.
  • Service Life and Maintenance: Determine the desired service life and maintenance intervals to select a bearing that can meet these requirements.
  • Consult Bearing Manufacturer’s Catalogs and Technical Resources:

Once the application requirements are understood, consult the catalogs and technical resources provided by self-aligning bearing manufacturers. These resources contain valuable information such as bearing types, sizes, load ratings, and operating characteristics.

Identify the specific self-aligning bearing series or types that are suitable for the application based on the load capacity, speed capability, and other performance factors.

  • Consider Bearing Materials and Lubrication:

Pay attention to the bearing materials and lubrication requirements. Different bearing materials, such as steel, ceramic, or polymers, offer varying levels of performance in terms of load capacity, temperature resistance, and corrosion resistance.

Choose the appropriate bearing material that aligns with the application’s requirements. Additionally, consider the lubrication method and type of lubricant recommended for optimal bearing performance and longevity.

  • Factor in Safety and Reliability:

Ensure that the selected self-aligning bearing has an appropriate safety margin to handle the expected loads and operating conditions. It is advisable to consult with bearing experts or utilize engineering calculations to verify the bearing’s suitability and reliability.

  • Consider Application-Specific Features:

Depending on the application, there may be specific features or options to consider. For example, applications with high contamination levels may require sealed or shielded bearings to prevent debris ingress, while applications with high-speed requirements may benefit from bearings with optimized internal designs or cage materials.

  • Review Manufacturer Recommendations:

Finally, review the manufacturer’s recommendations for the selected self-aligning bearing in terms of installation guidelines, maintenance procedures, and any specific considerations for the application.

By following these guidelines and consulting with bearing manufacturers or experts when needed, you can make an informed selection and sizing of self-aligning bearings that meet the specific requirements of your application, ensuring reliable performance and longevity.

self aligning bearing

Can you provide examples of machinery or equipment that rely on self-aligning bearings for reliable operation?

Self-aligning bearings play a crucial role in ensuring the reliable operation of various types of machinery and equipment. Here are some examples of machinery and equipment that rely on self-aligning bearings:

  • Mining Equipment: Self-aligning bearings are used in mining equipment such as crushers, vibrating screens, and conveyor systems. These bearings help compensate for misalignment caused by heavy loads, vibrations, and uneven terrain, ensuring smooth operation and minimizing downtime in the mining industry.
  • Construction Machinery: Construction machinery, including excavators, loaders, and concrete mixers, rely on self-aligning bearings. These bearings accommodate misalignment caused by heavy loads, shock loads, and dynamic forces, enabling reliable performance and durability in demanding construction sites.
  • Paper Machines: Self-aligning bearings are essential components in paper machines, including the dryer section, press section, and calender rolls. These bearings compensate for misalignment caused by thermal expansion, high speeds, and varying loads, ensuring precise alignment and smooth operation throughout the paper manufacturing process.
  • Steel Rolling Mills: Self-aligning bearings are critical in steel rolling mills, where they support the heavy loads and high temperatures involved in the rolling process. These bearings accommodate misalignment caused by thermal expansion, roll deflection, and varying loads, ensuring the accuracy and efficiency of the rolling operations.
  • Printing Presses: Printing presses rely on self-aligning bearings in their rollers, cylinders, and other moving parts. These bearings compensate for misalignment caused by high-speed rotations, vibrations, and thermal effects, ensuring precise alignment and reliable operation in the printing industry.
  • Wind Turbines: Self-aligning bearings are crucial components in wind turbines, supporting the main shaft and rotor assembly. These bearings accommodate misalignment caused by wind gusts, turbine movements, and varying loads, enabling efficient power generation and prolonged service life of the wind turbine.
  • Automotive Wheel Hubs: Self-aligning bearings are used in automotive wheel hub assemblies, providing reliable rotation and supporting the vehicle’s weight. These bearings compensate for misalignment caused by uneven road surfaces, cornering forces, and thermal effects, ensuring safe and smooth operation of automotive vehicles.
  • Food Processing Equipment: Self-aligning bearings are employed in food processing equipment such as mixers, blenders, and conveyors. These bearings accommodate misalignment caused by varying loads, thermal effects, and sanitation processes, ensuring hygienic operation and reliability in food manufacturing facilities.

These are just a few examples of the machinery and equipment that rely on self-aligning bearings for reliable operation. Self-aligning bearings are utilized in a wide range of industries, including mining, construction, paper manufacturing, steel production, printing, renewable energy, automotive, and food processing, among others. Their ability to compensate for misalignment, handle high loads, and ensure smooth operation makes them indispensable components in numerous applications.

self aligning bearing

How do self-aligning bearings differ from fixed or non-self-aligning bearings?

Self-aligning bearings differ from fixed or non-self-aligning bearings in several ways. Here’s a detailed explanation of the differences between these types of bearings:

  • Design and Construction:

The design and construction of self-aligning bearings are distinct from fixed or non-self-aligning bearings. Self-aligning bearings have a spherical outer ring raceway, which allows for misalignment compensation. In contrast, fixed or non-self-aligning bearings typically have a cylindrical or tapered outer ring raceway, designed for precise alignment between the shaft and the housing.

  • Misalignment Compensation:

The primary difference between self-aligning bearings and fixed or non-self-aligning bearings is their ability to compensate for misalignment. Self-aligning bearings can accommodate angular misalignment, axial misalignment, and shaft deflection, whereas fixed or non-self-aligning bearings have limited tolerance for misalignment and require precise alignment during installation.

  • Load Distribution:

Self-aligning bearings distribute the load more evenly across the rolling elements and raceways, thanks to their ability to accommodate misalignment. This helps reduce localized stresses and minimize the risk of premature failure. Fixed or non-self-aligning bearings, without the ability to compensate for misalignment, may experience uneven loading and increased stress on specific areas, leading to accelerated wear and potential failure.

  • Friction and Wear:

Due to their misalignment compensation capability, self-aligning bearings help reduce friction and wear. Misalignment in fixed or non-self-aligning bearings can cause increased friction and localized wear, leading to reduced bearing life. Self-aligning bearings distribute the load more evenly, minimizing friction and wear on the rolling elements and raceways, resulting in improved reliability and longevity.

  • Application Range:

The different design and misalignment compensation capability of self-aligning bearings make them suitable for a broader range of applications compared to fixed or non-self-aligning bearings. Self-aligning bearings are commonly used in applications where misalignment is expected, such as heavy machinery, conveyor systems, and mining equipment. Fixed or non-self-aligning bearings are typically employed in applications that require precise alignment, such as machine tools or high-precision equipment.

  • Installation and Maintenance:

Self-aligning bearings offer easier installation and maintenance compared to fixed or non-self-aligning bearings. The self-aligning capability of these bearings allows for more flexibility during the installation process, accommodating slight misalignments. In contrast, fixed or non-self-aligning bearings require careful alignment procedures to ensure proper functioning. Additionally, self-aligning bearings are often designed for easier maintenance, enabling tasks such as re-greasing or replacement without extensive disassembly.

In summary, self-aligning bearings differ from fixed or non-self-aligning bearings in their design, misalignment compensation capability, load distribution, friction and wear characteristics, application range, and ease of installation and maintenance. These differences make self-aligning bearings particularly suitable for applications where misalignment is expected or dynamic operating conditions are present.

China high quality 1300 Series Insudtrial Components Ball Bearing Self-Aligning Ball Bearing   bearing driver kitChina high quality 1300 Series Insudtrial Components Ball Bearing Self-Aligning Ball Bearing   bearing driver kit
editor by CX 2024-02-12